HobbyPlus CR-18P EVO PRO With FURITEK STARTER BRUSHLESS POWER SYSTEM WITH RECEIV

Description: HobbyPlus CR-18P EVO PRO With FURITEK STARTER BRUSHLESS POWER SYSTEM WITH RECEIVER FOR HOBBY PLUS EVO PRO Introducing CR-18P EVO-PRO HobbyPlus RC started with micro crawlers in 2018 and made the world’s first hobby-gradescale crawler in 2019. A few years down the road, we have introduced the CR-18, theCR-18P and CR-18P EVO series. With feedback from dealers and users, we havelearned that performance is of the utmost importance with small-scale crawlers. Theuserbase in this category is growing very fast.The expectation of users nowadays is different. They wish to have a small-scale RC thatcan be enjoyed not only on the tabletop indoors but also outdoors under extremeconditions.This brings us to our latest creation, the new EVO-PRO. The new PRO version isdesigned for those looking for a small scaler that has comp-level performance anddurability. It is designed with a new LCG-concept chassis frame, and revised shockgeometry with big-bore oil shocks for better articulation while crawling.New servo-on-axle (SOA) setup has been designed for sharper steering, and will be aidedby sticky oversize tires, giving users maximum traction on all terrain. The layout of thechassis has also been redesigned with better weight bias, and a more powerful 280 sizebig-block motor has been included to make sure users get the best crawling experience.To accommodate the new motor, we have designed a new heavy duty driveshaft for theEVO-PRO! Vehicle Spec Length: 225mm Height: 98mm Weight: approx 400g Width: 138mmWheelbase: 160mmDrive Train: Full-lock 4WD Shock: oiled-filled Coil spring Wheel: Internal bead lockTire: 68mm competition-spec Super Soft RubberElectronicsTransmitter TX: 2.4ghz 4channelRX: 4ch (PPX4 grade water resistant) Battery: 7.4v 2S Li-po 360mah ESC: FLYSKY ESC/RX combo Motor: Big Block 280 sizeCharger: USB with indicator Features- New angle motor LCG aluminum chassis frame- New servo on axle (SOA) design- New Big Block 280size brushed motor- New big-bore oil shocks with aluminum caps- New electronics layout design- New ultra-lightweight pinched LCG body- New 68mm high-performance comp-spec tires- New heavy-duty plastic driveshaft- Full metal gears in transmission gearbox and axles- 2-speed transmission gearbox- More track width (10mm wider than CR18P EVO) New LCG Chassis frame New ultra-light weight LCG pinched body New super sticky compound 1.2inch tire (68mm OD, 23.5mm width ) New electronics layout for better weight bias ( Front/Rear/Left/Right 50:50 ) New LCG chassis angle ( more rear clearance and lower motor CG ) New high volume big bore oil shocks with aluminum cap and retainer New servo-on-axle setup ( SOA ) Newly developed heavy-duty drive shaft New 58T 280 Big-Block High-Power Motor Track width increase of 10mm FURITEK STARTER BRUSHLESS POWER SYSTEM WITH RECEIVER FOR HOBBYPLUS EVO PRO SUPPORT 2S LIPO only Introducing the Furitek STARTER brushless power system for Hobby Plus Evo Pro, the system includes the VENOM 1212 3450kv with lighter and smaller size yet very powerful at low speed but also more powerful and fast at high speed, a Lizard Pro esc. The motor is designed with high torque at low speed crawling and with a special firmware from the Lizard Pro ESC, this motor is super smooth without any cogging at both low and high speed operation. This power system is a complete drop-in combo for Evo Pro even compatible with stock battery. With Furitek FURICAR mobile phone app and Bluetooth module, users can set up any parameters on the run without touching the truck, creating seamless adjustments for your favorite settings. Features:- A smaller and lighter brushless motor VENOM for low C.G. setup same like stock- High performance and powerful 30A/50A brushless ESC with FOC technology- Wireless module for wireless connection- Precision CNC brass pinion for long-lasting operation- Powerful at low speed but also more powerful and fast at high speed- High torque at low speed crawling- Super smooth without any cogging at both low and high speed operation¬- Compatible with stock battery- Lifetime FREE firmware upgrade!Package includes:- 1 x LIZARD PRO 30A/50A BRUSHED/BRUSHLESS ESC FOR FCX24 WITH FOC TECHNOLOGY with enclosing plastic case- 1 x built-in Wireless module- 1 x VENOM 1212 3450KV brushless motor- 1 x 11T CNC Steel Pinion- 1 x Furitek Receiver 4CH Motor Features and SpecsFeatures:- 12 Pole hi-torque motor design.- Super thin (0.2 mm) stator laminations---lower eddy losses---maximizes efficiency.- Japansese NMB --High RPM ABEC5 bearings.- Precision balanced rotor, smoothness for best reliability and maximum RPM.- CNC machined 6061 T6 billet aluminum heatsink can.- Precision engineered for maximum energy conversion.- High purity and higher temperature single copper windings, lower copper losses,very good heat dissipating, maximizes efficiency.Specifications:- KV (RPM/Motor) – 3450- No-load current @10V – 0.7A- Watt – 120W- Battery – 2S- Resistance – 0.16 Ohms- Max Current – 10A- Slot/Pole – 12- Motor size (mm) – 15.5x20.6- Shaft (mm) – 2x6- Weight (g) – 17.5ESC Features and SpecsFeatures:- Support sensorless brushless DC and brushed DC motor (config via app, default is brushless)- FOC (Field-oriented control) technology- Plug & Play designed for FMS FCX24 crawlers- 5V/ 6.5V 2.5A Built-in BEC (config via app)- Support 2S-3S lipo battery - Mini size and lightweight- Super easy programming via App on both Android and IOS- Firmware update available (Bluetooth module required)- Real-time telemetry up to 10HzSpecifications:- Support 2S-3S lipo battery- BIG BEC: 5V or 6.5V 2.5A (No additional BECs necessary when using big Servos)- Constant current: 30A- Burst current: 50A- Built-in power switch- Built-in bluetooth module- Dimension (mm): 28(L)x 15.5(W)- Weight: 3.7 gram HobbyPlus CR-18P EVO PRO With FURITEK STARTER BRUSHLESS POWER SYSTEM WITH RECEIVER FOR HOBBY PLUS EVO PRO Introducing CR-18P EVO-PRO HobbyPlus RC started with micro crawlers in 2018 and made the world’s first hobby-grade scale crawler in 2019. A few years down the road, we have introduced the CR-18, the CR-18P and CR-18P EVO series. With feedback from dealers and users, we have learned that performance is of the utmost importance with small-scale crawlers. The userbase in this category is growing very fast. The expectation of users nowadays is different. They wish to have a small-scale RC that can be enjoyed not only on the tabletop indoors but also outdoors under extreme conditions. This brings us to our latest creation, the new EVO-PRO. The new PRO version is designed for those looking for a small scaler that has comp-level performance and durability. It is designed with a new LCG-concept chassis frame, and revised shock geometry with big-bore oil shocks for better articulation while crawling. New servo-on-axle (SOA) setup has been designed for sharper steering, and will be aided by sticky oversize tires, giving users maximum traction on all terrain. The layout of the chassis has also been redesigned with better weight bias, and a more powerful 280 size big-block motor has been included to make sure users get the best crawling experience. To accommodate the new motor, we have designed a new heavy duty driveshaft for the EVO-PRO! Vehicle Spec Length: 225mm Height: 98mm Weight: approx 400g Width: 138mm Wheelbase: 160mm Drive Train: Full-lock 4WD Shock: oiled-filled Coil spring Wheel: Internal bead lock Tire: 68mm competition-spec Super Soft Rubber Electronics Transmitter TX: 2.4ghz 4channel RX: 4ch (PPX4 grade water resistant) Battery: 7.4v 2S Li-po 360mah ESC: FLYSKY ESC/RX combo Motor: Big Block 280 size Charger: USB with indicator Features - New angle motor LCG aluminum chassis frame - New servo on axle (SOA) design - New Big Block 280size brushed motor - New big-bore oil shocks with aluminum caps - New electronics layout design - New ultra-lightweight pinched LCG body - New 68mm high-performance comp-spec tires - New heavy-duty plastic driveshaft - Full metal gears in transmission gearbox and axles - 2-speed transmission gearbox - More track width (10mm wider than CR18P EVO) New LCG Chassis frame New ultra-light weight LCG pinched body New super sticky compound 1.2inch tire (68mm OD, 23.5mm width ) New electronics layout for better weight bias ( Front/Rear/Left/Right 50:50 ) New LCG chassis angle ( more rear clearance and lower motor CG ) New high volume big bore oil shocks with aluminum cap and retainer New servo-on-axle setup ( SOA ) Newly developed heavy-duty drive shaft New 58T 280 Big-Block High-Power Motor Track width increase of 10mm FURITEK STARTER BRUSHLESS POWER SYSTEM WITH RECEIVER FOR HOBBYPLUS EVO PRO SUPPORT 2S LIPO only Introducing the Furitek STARTER brushless power system for Hobby Plus Evo Pro, the system includes the VENOM 1212 3450kv with lighter and smaller size yet very powerful at low speed but also more powerful and fast at high speed, a Lizard Pro esc. The motor is designed with high torque at low speed crawling and with a special firmware from the Lizard Pro ESC, this motor is super smooth without any cogging at both low and high speed operation. This power system is a complete drop-in combo for Evo Pro even compatible with stock battery. With Furitek FURICAR mobile phone app and Bluetooth module, users can set up any parameters on the run without touching the truck, creating seamless adjustments for your favorite settings. Features:- A smaller and lighter brushless motor VENOM for low C.G. setup same like stock- High performance and powerful 30A/50A brushless ESC with FOC technology- Wireless module for wireless connection- Precision CNC brass pinion for long-lasting operation- Powerful at low speed but also more powerful and fast at high speed- High torque at low speed crawling- Super smooth without any cogging at both low and high speed operation¬- Compatible with stock battery- Lifetime FREE firmware upgrade!Package includes:- 1 x LIZARD PRO 30A/50A BRUSHED/BRUSHLESS ESC FOR FCX24 WITH FOC TECHNOLOGY with enclosing plastic case- 1 x built-in Wireless module- 1 x VENOM 1212 3450KV brushless motor- 1 x 11T CNC Steel Pinion- 1 x Furitek Receiver 4CH Motor Features and SpecsFeatures:- 12 Pole hi-torque motor design.- Super thin (0.2 mm) stator laminations---lower eddy losses---maximizes efficiency.- Japansese NMB --High RPM ABEC5 bearings.- Precision balanced rotor, smoothness for best reliability and maximum RPM.- CNC machined 6061 T6 billet aluminum heatsink can.- Precision engineered for maximum energy conversion.- High purity and higher temperature single copper windings, lower copper losses,very good heat dissipating, maximizes efficiency.Specifications:- KV (RPM/Motor) – 3450- No-load current @10V – 0.7A- Watt – 120W- Battery – 2S- Resistance – 0.16 Ohms- Max Current – 10A- Slot/Pole – 12- Motor size (mm) – 15.5x20.6- Shaft (mm) – 2x6- Weight (g) – 17.5ESC Features and SpecsFeatures:- Support sensorless brushless DC and brushed DC motor (config via app, default is brushless)- FOC (Field-oriented control) technology- Plug & Play designed for FMS FCX24 crawlers- 5V/ 6.5V 2.5A Built-in BEC (config via app)- Support 2S-3S lipo battery - Mini size and lightweight- Super easy programming via App on both Android and IOS- Firmware update available (Bluetooth module required)- Real-time telemetry up to 10HzSpecifications:- Support 2S-3S lipo battery- BIG BEC: 5V or 6.5V 2.5A (No additional BECs necessary when using big Servos)- Constant current: 30A- Burst current: 50A- Built-in power switch- Built-in bluetooth module- Dimension (mm): 28(L)x 15.5(W)- Weight: 3.7 gram × × × × × × × × × × × × Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like T-Rex 550L Bearing Block (Upper) - Trex 550L Dominator Protos 700 M3x8 Socket Head Cap Screw Combo of FURITEK IGUANA PRO 30A/50A BRUSHED ESC FOR AXIAL SCX24 with Bluetooth SAB Sticker Raw 580 Orange Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © HeliDirect Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. Additional Information: HeliDirect offers a (14) day return policy for all new, unuséd items that are in brand new condition without fault, damage or otherwise. Items being returned must be brand new without any use. Any kits that have been partially or fully built, items that have been soldered, batteries that have been soldered or charged, or products that have been cut, punctured, modified or otherwise, will not be accepted as a return. Aircraft that have been “test flown” will not be accepted as a return item. - Valid returns are based upon factory sealed products that are in 100% resale condition. We will charge 20% restocking fee for this case. Shipping fee wont be refunded. - If the item(s) received has been opened, uséd or damaged, no return options will be offered. Outside of warranty, any item without fault or warranty related issue cannot be accepted back unless the item is in brand new condition, as we cannot offer an opened or uséd item to our customer base. - If a non warranty item is being returned based upon valid return guidelines (brand new, unuséd, factory sealed packaging), the original shipping fees paid by HeliDirect (if Free Shipping was uséd) will be deducted from the overall sum total. If the customer paid for a specified shipping method, these shipping fees will not be valid for a refund. ***Returning Fragile Items - In regards to returning fragile items that can be easily damaged, it is the customer’s sole responsibility to ensure that the package is packed and sealed safely, as any damage via return shipping will not be accepted. If a damaged item is received, it will be returned to the original shipping address, and will need to be settled via the customer through the shipping agent uséd. HeliDirect will not be involved in any claims, refunds, credits or otherwise for return shipping damage. *** Warranty Returns - Faulty / Damaged Item(s) Received - For any item that is faulty, damaged, or falls relating to warranty related issues, please contact our customer service department for help, and we will be sure to assist you in every way possible in regards to the matter at hand. - Please note that certain / select products we carry may be replaced or repaired direct via the manufacture, no matter when the item / product was purchased. In this case, feel free to contact us for help, and we will issue you the proper contact information so the item can be addressed via the manufacturer. However, we will be certain your warranty is properly addressed. - For valid returns, once an RMA number is received, please ship back to us via standard shipping – no upgraded shipping method, such as 2nd Day Air, Overnight, or EMS will be credited or refunded. Returns can take several days to be processed. - For DJI brand, please contact directly DJI service center. ***Return Processing Requiring Product Testing - For any item requiring testing,as the testing process via our in house technicians will require the necessary time to problem solve your return. Our goal is to isolate whatever trouble your item(s) may be experiencing, and as soon as we have the available information to proceed, you will be updated regarding this. RMA Number Information All approved return items will require an RMA number before being shipped back to our location. This number aids us in the ability to properly handle your return. Without an RMA number, your package has a probability of being mis-handled, lost or delayed, and HeliDirect will take no responsibility for any return that does not have an approved RMA number. Please contact our staff for proper RMA information, as we are happy to help you. ***Note; For all return products without contact us before. It means you violate our return policy. eBay integration by

Price: 268 USD

Location: Middletown, Indiana

End Time: 2024-08-28T02:28:53.000Z

Shipping Cost: N/A USD