Hooke Road Front or Rear Back Bumper w/ LED Light Fit 2016-2023 Toyota Tacoma

Description: Hooke Road Front or Rear Back Bumper w/ LED Light Fit 2016-2023 Toyota Tacoma Type 1 full-width front bumperAudacious, angular off-road design with low-profile hoopProtects vehicles from on & off-road debrisHeavy-duty, high tensile 11-gauge(1/8 Inch) steel for the bumper main body, 8-gauge(11/64 Inch) for the structure mounting bracketTextured black powder coat finish & Premium E-coating process InsideHigh strength D-Ring mounts welded both inside and out with 4.75-ton capacity. 9500 lbs rated,3/4'' D-rings includedBuilt-in winch plate – only fits advanced wireless remote operate winch without a manual clutch handle. Rated up to 12,000 pounds. 4×18w LED spotlights included. Come with a light mounting port for a 31.5" LED light bar.Not Compatible with Factory SensorsModerate installation requires trimming of the factory bumperBumper weight: about 141 lbsCutting Required for Installation Type 2 One-piece design stubby front bumperExciting off-road styling. Delicate hollowed-out honeycomb design on both sides.High-strength D-ring mounts. D-rings not included.License plate mounting bracket includedFeatures a 72W LED spot light bar and 2×18W LED spotlightsNot compatible with factory parking sensors Heavy-duty steel construction: 11-gauge(1/8 inch) plate for the bumper main bodyTextured black powder coat finish & Premium E-coating process insideBumper weight: about 67 lbsDirect bolt-on installation. Mounting hardware included. Type 3 One-piece design stubby front bumperDelicate hollowed-out honeycomb design on both sidesHigh-strength D-ring mounts. D-rings not includedLicense plate mounting bracket includedFeatures a 72W LED spot light bar and 2×18W LED spotlightsNot compatible with factory parking sensors Heavy-duty steel construction: 11-gauge(1/8 inch) plate for the bumper main bodyTextured black powder coat finish & Premium E-coating process insideBumper weight: about 56 lbsDirect bolt-on installation. Mounting hardware included Type 4 Bull Bar Full Width Front Bumper3-piece modular design. Exciting off-road styling with a strong bull barAudacious, angular off-road design that provides an increased approach angleDecorated with honeycomb steel platesHigh strength D-ring mounts welded both inside and out with a 4.75-ton capacity. D-rings not includedComes with a winch plate that is rated up to 12, 000 lbsLicense plate mounting bracket includedFeatures 4×25W LED spotlightsEquipped with a solid skid plateNot compatible with factory parking sensors Heavy-duty 11-gauge(1/8 inch) steel plate for bumper main body, 1.57"×0.06" steel tube for the bull bar, 9-gauge(5/32 inch) steel plate for the winch plate and mounting structureTextured black powder coat finish & Premium E-coating process insideBumper weight: about 86 lbsModerate bolt-on installation. Requires cutting part of the factory plastic bumper cover Type 5 Full-width Front Bumper3-piece modular design. Rugged styling with an angle bull barProtects vehicles from on & off-road debrisHigh strength D-ring mounts welded both inside and out with 4.75-ton capacity. D-rings not included.Equipped with a license plate mounting bracketComes with a winch plate that is rated up to 12, 000 lbsFeatures a solid skid plateEquipped with a 72W LED spot light barWorks with factory fog lights or 4-inch LED fog lights(Not Included)Not Compatible with front parking sensorsHeavy-duty 11-dauge(1/8 inch) steel plate for bumper main body, 9-gauge(5/32 inch) steel plate for the winch plate and mounting structureTextured black powder coat finish & Premium E-coating process insideBumper weight: about 103 lbsModerate bolt-on installation. Requires cutting part of the factory plastic bumper cover. Type 1 Rear BumperRugged Styling and ProtectionHeavy-duty, high tensile 11-gauge(1/8 inch) steel for the bumper main body, 7-gauge(3/16 inch) for the mounting bracketsTextured black powder coat finish & Premium E-coating process insideHigh strength shackle mounts welded both inside and out with 4.75-ton capacityIncludes a license plate light and 2×18w high power LED floodlights License plate mounting plane includedCompatible with factory back-up sensorsAccommodates factory hitch receiver Decorated w/ "Hooke Road" LOGOBumper weight: about 58 lbsBolt-on installation w/ clear and detailed instruction Type 2 Rear BumperRear Bumper provides adequate rear-end protection One-piece, fully-welded structureHeavy duty 11-gauge(1/8 Inch) steel constructionTextured black powder coat finish & Premium E-coating process inside2×18w LED floodlights included License plate mounting bracket includedPre-formed cut-outs to accommodate factory license plate lightsIntegrated corner side steps for convenient truck bed accessWorks with factory receiver hitchesDecorated w/ "Hooke Road" LogoBumper weight: about 57 lbsSimple bolt-on Installation w/ detailed instructionCompatible with factory back-up sensors. Pre-drilled holes for sensors to fit properly. Professional installation is recommended. Type 3 Rear BumperSolid and lightweight steel bumper. Perfect for overland trails.One-piece structureFeatures high strength D-ring mounts. D-rings are not included.Includes a license plate light and 2×18w LED spotlights License plate placing plane and mounting holes includedCompatible with factory backup sensorsWorks with the factory hitch receiver Heavy-duty, high tensile 11-gauge(1/8 inch) steel for the bumper main bodyTextured black powder coat finish & Premium E-coating process insideBumper weight: about 50 lbsBolt-on installation. Mounting hardware included. Type 4 Rear Bumper w/ Dual Swing Arms & 5.3-Gallon Jerry Can Holder 2×18w LED single row spotlights included Boasts high-strength D-ring mounts. D-rings not included. License plate mounting plane and mounting holes included,equipped with a license plate lightComes with a bracet for trailer connectorRetains factory hitch receiverCompatible with factory back-up sensorsDual swing arm configuration. Featuring a 3-latch Mechanism allowing for an intuitive and rugged system to keep your tire and gear secure out on the trails.Handy locking structure ensures stability and safety while the carrier arm is opening at the largest degree.Holds 5.3-gallon Jerry Can(Not Included). Equipped with ratchet tie down strap to secure the Jerry Can. Easily stow and access gas can. Design to carry two 2-gallon fuel containers(Fuel containers and mount Not Included)Universal plate backing for limitless mounting configurationsAccommodates up to 37" spare tiresAdjustable for different wheel heights.Textured black powder coat finish & Premium E-coating process insideHeavy-Duty 11-Gauge(1/8 in) steel plate for bumper main body, 9-gauge(5/32 in) steel plate for the mounting structure, 9-gauge(5/32 in) steel plate for the dual swing armsEase of installation. Mount hardware is included.The whole bumper weight: about 168 lbsFitment:Fits 2016-2023 Toyota Tacoma Models Package Included Front Bumper or Rear BumperLED Lights Mounting Hardware Kit Installation InstructionDELIVERY DETAILSPAYMENTABOUT RETURNABOUT USCONTACT USDELIVERY DETAILSNormally, your package will be handed to USPS/FedEx by 2 workdays, and the following delivery could take 1-10 day(s).Ourwarehouses are in CA/NJ, US. Your package will be shipped from the nearest warehouse which has stock. During the epidemic situation, information of logistics updated as well as deliveries could be delayed caused by lack of man power from logistics company. If the logistics information shows "Shipment information sent to XXX", your package has been handed to the logistics personnel. Please be patient or contact us for further information.PAYMENTWe accept Paypal, Visa, Mastercard, Apple Pay, Google Pay, American Express etc. ABOUT RETURNWe provide 30 days return guarantee for all items that we sold. But please contact us first. We will be happy to exchange or refund. All returned products must be in original condition and packaging. Please take some pictures of the product to us before sending out. Unfortunately, if products have been assembled or modified, we cannot take them as returns. Please save your return tracking number or post receipt, and email it to us. We need this in case there are any issues during transit. Refund will only be issued upon our receipt of the returned parcel.If the product was damaged on the return shipping way, we can only offer partial refund.ABOUT USWe are the authorized dealer of the "Hooke Road®" brand.The Hooke Road Brand has been certified as a member of SEMA. We have our own factory and design team. We make all kinds of specialty parts and accessories to make vehicles more attractive, more unique, more convenient, faster, safer, more fun and even like-new again. Wish you have a terrific off-road experience with our products.CONTACT USPlease contact us via eBay message. All E-mail will be replied within 24 Hours in working days or 48 hours on weekend.If you are satisfied with your purchase, please leave us 5 Star Ratings and Positive Feedback. It will be highly appreciated! Warm Prompt: If you have any problems with this order/item, such as items not being received on time or packages being damaged, please contact us firstly. We will give you a satisfactory solution.

Price: 279.88 USD

Location: United States

End Time: 2024-09-21T13:44:18.000Z

Shipping Cost: 0 USD