Indoor Outdoor Thermometer, Digital Hygrometer Thermometer, Wireless Temperat...

Description: Feature 1. Rate of Change Icon: The rate of change icon detects rapid changes in temperature and humidity. If the arrow points upward, the temperature is increasing at a rate of +1°C per 30 minutes (or greater). If the arrow points downward, the temperature is decreasing at a rate of -1°C per 30 minutes (or less). If the arrow points upward, the humidity is increasing at a rate of +5% per 30 minutes (or greater). If the arrow points downward, the humidity is decreasing at a rate of -5% per 30 minutes (or less). 2. Three Button: MIN/MAX button, LIGHT button, CHANNEL button on the top, and C/F button in the back. 3. Backlight Mode: It has three levels of brightness. Press the LIGHT button to choose the bright you like. 4. C/F Transition: Press the C/F button on the back to transit between between degree C and degree F. 5. Wireless Transmission (in open air): 100 meters 6. Frequency: 433 MHz 7. Update Rate: 60 seconds 8. Base Station: 3 x AAA 1.5V Alkaline or Lithium batteries (not included) 9. Remote Sensor: 2 x AAA 1.5V Alkaline or Lithium batteries (not included) 10. Battery Life: Minimum 12 months for base station with one sensor and excellent reception. Note: 1. To avoid permanent damage, please take note of the battery polarity before inserting the batteries. 2. It is not recommended leaving the backlight on for a long period of time when operating on batteries only, or the batteries will run down quickly. Package Included: 1* Base Station 3* sensors 1* User Manual Connect Note: Pls install the station battery first, then install the sensor battery. If a specific channel is lost, press the CHANNEL/+ button until the channel indication single flashing.Verify the humidity sensors match closely with the console and the sensors are in the same location (about 1-3 meters apart). The sensors should agree within 10% (the accuracy is +/- 5%). Allow about 30 minutes for all sensors to stabilize. Humidity Expression: Large LCD display with simple and clear readings. Indoor temperature (0 - 60℃); Outdoor temperature (-40 - 60℃); Humidity (10% - 99%). The temperature and humidity accuracy: +/- 1℃, +/- 5%; Wet: humidity more than 65%; COM: 45%-65%; DRY: humidity less than 45%. The express changes following the changing of the humidity. Backlight & Battery Life: You can press the "Light" button to turn on the backlight. It will automatically turn off after 10 seconds if without any operation. This help you to read the data clearly even at night. Please re-install the battery if the sensor cannot connected. The Station and transmitter signal distance: 100M/328ft. The station need 3 AAA Battery; Sensor need 2 AAA Battery.(not included). Max & Min Record: Max & Min functions on indoor and outdoor on both temperature and humidity. The data update every 60 seconds. Press the ℃/°F button to switch between celsius and fahrenheit. Ideal for your house, office, factory, etc. Battery : 1. Host: Please snap off the back cover, put the battery in, and close the back cover; 2. Sensor : Please push the back cover in the direction of the arrow, then put the battery in, and close the back cover. When the sensor shows the low battery icon, that means you need to change the new battery. Heartwarming Reminder: The transmitter is not waterproof. It is best not to place it in the open air. It can be placed on the outdoor eaves or in a sheltered place on the transmitter. Do not expose the transmitter to rain.

Price: 42.89 USD

Location: Scottsdale, Arizona

End Time: 2024-12-04T10:41:15.000Z

Shipping Cost: 0 USD