Installation Kit for Wall Mount Commercial Kitchen Sink Faucet, Backsplash

Description: Installation Kit for Wall Mount Commercial Kitchen Sink Faucet, Backsplash Mounted Kit Sink Faucet Connector Adapter Set for Stainless Steel Commercial Kitchen Utility Sink, G1/2, Solid Brass Item Description lead free brass Larger Rubber Washer, Better secured: Upgraded rubber washer of this wall mount faucet installation kit (1.75”) is larger than the other brands kit (1.5 ”). It’s features completely cover the backsplash hole, It does a good job of securing the wall mount faucet to the commercial sink as long as the hole is less than 1.5 inches in diameter. No longer to worry about the rubber will get stuck in the hole and damage because too small and too thin Premium Lead-free Brass: Built to last. AGAHPAY sink installation kit is made from premium quality brass. This faucet installation kit never crack in the extreme temperature range: -22℉ to 248℉. Every installation kit is tested and inspected for impeccable grade before selling Non-leak Design: This commercial faucet installation kit is one-piece lead-free brass construction which can’t separate. Solid brass lock nut, metal washers and rubber washers do their work together for better sealing. Get rid of the leaking Space-Saving Wall Mount Faucet Kit: This sink installation kit for tight spaces. Our mounting kits are engineered to 90-degree elbow connectors, keep your sink installation neat, and save you a few inches of precious behind backsplash space Widely Application Faucet Mounting Kit: The thread outlet size is 1/2 IPS(G1/2) male which used to adjustable 1/2” female. This wall mount faucet installation kit can be installed on all brands of commercial wall mount faucets with G ½ female end. Please applying a coat of soft set thread sealant or adding water seal tape for better sealing if you want to install this mounting kit on 1/2 NPT threads › See more product details *This is an installation kit for backsplash mount faucets or commercial kitchen faucets. This faucet installation kit secures the faucet to the backsplash of your sink and provides a lock nut for easy attachment.*Suitable kit for commercial wall mount faucet installation. Connect the faucet elbow kit with the AGAHPAY commercial faucet for maximum longevity, perfect performance, and reduce the water hose of daily wear and tear of.*Lead-free casting brass construction makes it safe for water contact. The wall mount faucet kit provide precious inlet line space after mounting the pre-rinse faucet or wall mount faucet.*AGAHPAY 90-degree elbow kit is compatible with all G1/2 (IPS) connectors. Please applying a coat of soft set thread sealant or adding water seal tape for better sealing if you want to install it on 1/2 NPT threads.*Our Brass is has gained tremendous accreditation in the markets for its exclusive features like sturdy construction, longer service life and high pressure strength.*Lead-free brass of AGAHPAY product replaces the lead with silicon, bismuth or mixed copper alloys, which been used in the foundry process to make brass castings pressure tight.*We use large precision machines with intelligent automatic controller for product casting to significantly reduce the error range.*This sink installation kit applies to compartment sinks, prep sinks, utility sinks, hand sinks, mop sinks, drop in sinks or commercial wall mount sink.*A universal size (G 1/2) for commercial wall mount faucet and pre-rinse faucet as like AGAHPAY, JZ, TS, MS, IM and so on.*Save the space behind backsplash for protecting your water hose.*We advise applying water tape to the water inlet side of the faucet kit.*Pull the tape taut as you unroll it to ensure a tight fit. The tape should be drawn in between the threads as you wrap them.*Pull the tape taut as you do so to make sure that both the grooves and ridges are equally covered. Once the threads are totally covered, cut the tape loose from your roll and pull the end tight over the last threads.*Stray bits of tape that stick over the pipe's edge will end up in the pipeline when the two pipes are connected. They may then block the flow od water, causing clogs and weak pressure. Material of AGAHPAY products which are renowned for effective features like durability, strength, corrosion resistance and abrasion resistance. Due to superior material and exquisite craftsmanship, we have gained a firm foothold in the industry.Faucet intallation kits with Teflon water-sealing tape for better prevent leaking or dripping.Q: Which brands of kitchen faucets does this elbow fit?A: This installation kit is compatible with all brand of wall mount commercial faucet with G1/2 (1/2 G IPS) thread female inlet. If you want to install it on 1/2 NPT threads, add water seal tape for a leak-proof seal.Q: Can I return it if it doesn't fit my wall mount faucet?A: Sure, free returns are available for this backsplash mounting kit.A: There are two backsplash kits and a roll of water seal tape.Q: Do I need to hire a plumber to install this faucet mounting kit?A: It’s easy to replace the commercial faucet installation kit by yourself. You can upgrade any plumbing elbow in your home, restaurant, garage, orutility room with our faucet kit. But if it’s a complex commercial kitchen set-up, we suggest you consult an experienced professional.A: The old model was ½ inch as described, but we recently restocked thickened rubber washer is ¾ inch. Payment We accept payment only through PAYPAL Shipping We ship products worldwide through standard express courier service, it will reach within 7 to 10 days to abroad buyers, we ship the product after recieved clear payment and give full information about shipment to the buyer Return We accept product return within 7 to 21 days from delivery date but product should be in original position and not in damaged condition,the return shipping charges will be buyer responsibility

Price: 37.81 USD

Location: New York, New York

End Time: 2025-01-11T21:24:45.000Z

Shipping Cost: 0 USD