KitchenAid KN256PS Stand Mixer 1-Piece Pouring Shield for KSM150/KG25/KSM500

Description: One of the best features of a stand mixer is that you can add other ingredients while the mixing action is occuring. However, it can be a little tricky trying to get those eggs, or that sugar into the bowl, without getting in the way of a moving beater, or without ingredients sloshing outside the bowl. The answer to these difficulties is a pouring shield. The chute lets you add ingredients from a safe distance while the "collar" prevents splashes from wet ingredients and "puff" from dry ingredients. The dual-purpose pouring shield is an accessory that sits on the bowl and permits the easy addition of ingredients while the mixer is running, as well as helps to keep ingredients from splashing out of the bowl during mixing. Attaching Pouring Shield 1. Turn the Speed Control to the OFF position and unplug the mixer from the outlet. 2. Attach the bowl along with the flat beater, dough hook, or wire whip. 3. Lower and lock the motor head. 4. From the front of the mixer, slide the pouring shield over the bowl until the shield is centered. The bottom rim of the shield should fit within the bowl. Using the Pouring Shield 1. For the best results, rotate the shield so the motor head covers the "U" shaped gap in the shield. The pouring chute will be just to the right of the attachment hub as you face the mixer. 2. Pour the ingredients into the bowl through the pouring chute. Removing Pouring Shield 1. Turn the Speed Control to the OFF position and unplug the mixer from the outlet. 2. Slide the pouring shield off the bowl from the front of the mixer. ***for KSM150/KG25/KSM500 models ONLY***

Price: 39.99 USD

Location: Los Angeles, California

End Time: 2023-11-23T01:04:40.000Z

Shipping Cost: N/A USD