Description: Lectrosonics DNT16i - 16 Analog Input Dante Network Processor - GREAT! Lectrosonics DNT16I Overview The DNT16i from Lectrosonics is a processor that provides inputs into a Dante network from analog and digital signals. Each input provides extensive signal processing and routing to any one or all of forty-eight automatic mixers operating at the cross points of an internal digital matrix in the processor. The outputs of the matrix can be assigned to a Dante transmit channel and/or routed back to an input to be further mixed with another input or matrix mix. Sixteen microphone/line analog inputs with 48V phantom power and wide range gain controlSixteen Dante digital inputsThirty-two Dante digital outputsSupports both switched and redundant modes in Dante operationPre-mixing signal processing on all thirty-two inputs (analog and digital)Forty-eight independent automatic mixers with thirty-six inputs per mixer and channel activity detectorsSupport for multi-level mixing - mixes can be looped back and used as mixer inputsExtensive signal processing including filters, delay and channel linking for dynamic processing (compressors, limiters)Gain smoothing to prevent transient noise during instantaneous level changesFour test signal generators available for system setup and testingExtensive macro command languageControl interfaces via USB, RS-232, Ethernet and programmable logic I/ORack mount or under table mountThe price is for a unit of the Lectrosonics DNT16i. Lectrosonics DNT16i SpecsAudio Inputs(Balanced microphone/line level inputs with digitally programmable gain may be configured as unbalanced inputs)Audio Input ChannelsAnalog: 16 mic/line levelDigital: 16 Dante channelsGainAnalog: 0 dB to 56 dB, programmable in 8 dB steps (the analog gain is automatically set by selecting the input gain)Digital (Dante): -70 dB to +20 dBPerformanceImpedance: 8kΩ differential mode, 2kΩ common modeMaximum Analog Input Level: 20 dBuDynamic Range: 102 dBEIN: -127 dBu (20 Hz to 20 kHz, unweighted)THD + Noise: 0.01%A-D Sampling Rate: 48 kHz, fixedAudio OutputsDigital: 32 outputs delivered to the Dante networkDante InterfaceProvides dual RJ-45 connectors on the rear panel and an Ethernet switch built into the processorSupported Sampling Rate: 48 kHzData Rate LED: 100 Mbps/1 GbpsActivity LED: Blinks when activeModes of OperationSwitched mode using either connectorRedundant mode with primary and secondary networks using both connectorsNetwork ConnectivityDante interface and Ethernet control can be connected to the same networkFiltersAll filters have zero processing delayTone Control Stages: 4 per input channelADFE: 8 per input channel, configurable as static or dynamicInternal Signal GeneratorSwept SineModes: Single sweep, continuous sweepWaveforms: Sawtooth (up or down), triangleSweep Rate: Linear, logarithmicParameters: Start freq, stop freq, level (dBu), sweep time (sec)White Noise Parameter: Level (dBu)Pink Noise Parameter: Level (dBu)Tone (Sine Wave) Parameters: Level (dBu), frequencyFilter TypeLow PassButterworth 6, 12, 18, 24 dB/octaveBessel 6, 12, 18, 24 dB/octaveLinkwitz-Riley 12, 24 dB/octaveAdditional Parameters: Frequency (Hz)High PassButterworth 6, 12, 18, 24 dB/octaveBessel 6, 12, 18, 24 dB/octaveLinkwitz-Riley 12, 24 dB/octaveAdditional Parameters: Frequency (Hz)Low ShelvingButterworth 6, 12, 18, 24 dB/octaveBessel 6, 12, 18, 24 dB/octaveAdditional Parameters: Frequency (Hz), boost/cut (dB)High ShelvingButterworth 6, 12, 18, 24 dB/octaveBessel 6, 12, 18, 24 dB/octaveAdditional Parameters: Frequency (Hz), boost/cut (dB)Peaking EQ ParametricParameters: Frequency (Hz), bandwidth (octave), boost/cut (dB)CompressorSoft knee with RMS level detector eliminates need for separate attack and delay settings0.1 ms increments1 second maximumContinuously adjustable ratioPower Requirements100~240 VAC, 50/60 Hz 20 W maximum consumptionDimensions19 x 7.7 x 1.75" (483 x 196 x 44 mm)Weight5.3 lb (1.7 kg)Please, feel free to ask any questions.Thanks for looking.
Price: 1199.99 USD
Location: Frederick, Maryland
End Time: 2024-11-30T03:22:14.000Z
Shipping Cost: 34.75 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Lectrosonics
Model: DNT16I
MPN: DNT16i
