Description: Pair of Lufkin 903D Magnetic Hold Downs- from Lufkin's 1950s "Miti-Mite" line of magnetic-base tools -Description :You are buying a superb used pair of Lufkin No. 903D "Miti-Mite" magnetic hold downs, housed in their original Lufkin box, probably from the 1950s-1960s.The overall length of the polished aluminum plate that holds the steel hold downs is 6 inches. The length of the steel hold downs themselves is 5 inches. The 2 permanent magnets in each are 3¾ inches apart. The following is an entry explaining the hold downs from the undated Lufkin Precision Tools Catalog No. 8:Lufkin No. 903D "Miti-Mite" Magnetic Hold DownsA new idea in hold downs--faster, easier, more convenient for you to use--a real time saver. Lufkin Magnetic Hold Downs attach instantly to vise jaws in either a horizontal position or at an angle. Once placed in the desired position to hold the work, there is no necessity to hold them further with the hands, shims, blocks, or parallels.The clamping edge is less than 3/32"--will hold very thin work. The back of each Hold Down has a slight taper, which causes the clamping edge to force the work downward as the vise jaws close. A spring beneath each Hold Down keeps it in a horizontal position until this pressure is applied. The downward pressure assures the work will be firmly based when machining surfaces with a planer, Shipping for USA only!
Price: 35 USD
Location: Gardena, California
End Time: 2024-11-04T19:31:21.000Z
Shipping Cost: 12 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Lufkin
