Lutron MSCL-OP153M-IV Dimmer w/ Occupancy Sensor, 150W LED, SP/3-Way, Ivory

Description: Specifications Regulatory Approvals • UL Listed to U.S. and Canadian safety requirements • Title 20/24 certified lighting control device – Complies with Title 20 and Title 24 Section 119 (Until Jan 1st, 2014) • Title 20/24 certified lighting control device – Complies with Title 20 and Title 24 Section 110.9 (After Jan 1st, 2014) • NOM Certified Power • Operating voltage: 120 V~ 60 Hz Environment • Ambient operating temperature: 32 °F to 104 °F (0 °C to 40 °C), 0%-90% humidity, non-condensing; indoor use only Key Design Features Dimmer • On a single-tap, lights fade ON or OFF • On a double-tap, lights go to full ON • When ON, press and hold to engage a long fade to OFF • Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached Custom Sensor Settings Timeout Options • 1 Minute • 3 Minute • 5 Minutes (default) • 15 Minutes • 30 Minutes • Test Mode – Short (less than 15-second) timeout for testing sensor coverage. After entering, device will exit test mode automatically after 5 minutes, or when any button is pressed. Sensitivity Options • High sensitivity (default) • Low sensitivity Auto-ON Options • Occupancy (default): Auto-ON/Auto-OFF – Occupancy Mode is also called “Auto-On: Enabled” • Vacancy *: Manual-ON/Auto-OFF – Vacancy Mode is also called “Auto-On: Disabled” * There is a 15-second grace period that begins when the lights are automatically turned off, during which the lights will automatically turn back on in response to motion. This grace period is provided as a safety and convenience feature in the event that the lights turn off while the room is still occupied, so that the user does not need to manually turn the lights back on. After 15 seconds, the grace period expires and the lights must be manually turned on. • Ambient Light Detection (ALD): Lights turn on only if natural light in room is low – Smart—Ambient light threshold adjusts to the user’s preference** ** If sensor turns on when there is enough natural light, or if sensor does not turn on when there is not enough natural light, press the large button within 5 seconds of entering the room. Over time, this interaction will “teach” the sensor your preferred setting. • Off While Occupied (OWO) – When the sensor dimmer is manually turned off, the sensor dimmer will not turn the lights back on automatically while the room is occupied. – Once the room is vacated, the Auto-ON feature returns to normal operation after the timeout period has expired. – This may be the preference in conference rooms or classrooms while viewing presentations. This feature requires motion to keep the lights off. Occupied Level Options Occupied Level is the light level that the sensor dimmer will turn ON to when motion is detected. • 100% (default) • 50% • Preset – While in preset mode, lights will automatically turn to the last level or to the “Locked Preset” level if a “Locked Preset” has been selected in Advanced Programming.

Price: 35 USD

Location: Clinton, New Jersey

End Time: 2025-01-27T20:07:22.000Z

Shipping Cost: N/A USD