Description: Introduction The ME-MGT-ADAPTER allows you to connect your MagWeb GT to a Magnum MS-PAE inverter. This connection enables the MagWeb GT to communicate with the Magnum inverter. Use the MagWeb GT’s display to access and view operational information for the inverter— as well as system information for any attached accessories such as a remote control, or a battery monitoring device. Supplied Components: • ME-MGT-ADAPTER (dongle) • Remote cable (25’) • DB9 M-F Extension cable (1’) Installation Required Components: • MagWeb GT module • Magnum MS-PAE inverter To connect the MagWeb GT to a Magnum MS-PAE inverter: 1. Locate the Serial port on the MagWeb GT module (Figure 1). 2. Plug the female end of the DB9 cable into the MagWeb GT’s Serial port, and then plug the male end of DB9 cable into the DB9 female connector on the ME-MGT-ADAPTER (Figure 2). Screw in the attachment posts on each end of the DB9 cable to secure them to the MagWeb GT module and the ME-MGT- ADAPTER, respectively. 3. Plug one end of the remote cable into the RJ12 connector on the ME-MGT-ADAPTER (Figure 2). 4. Plug the other end of the remote cable into the Remote port (blue) on the Magnum MS-PAE inverter (Figure 3). The MagWeb GT can now communicate with the MS4024PAE/ MS4448PAE inverter.
Price: 34 USD
Location: Oroville, California
End Time: 2024-11-28T04:29:14.000Z
Shipping Cost: 5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Magnum
Model: ME-MGT-Adapter RS485 to RS232
MPN: 64-0088
