Makita Impact Driver TD172DZ Blue 18V Body Tool Only no Battery

Description: Makita Impact Driver TD172DZ Blue 18V Body Tool Only no Battery Main functionMaximum tighteningTorque (Nm) Tightening capacity (mm): 180Machine screw: M4 to M8Ordinary bolt: M5 to M16High-strength bolt: M5 to M14Course thread: 22-125.Strike mode / Rotation speed (min-1) [Rotation / min] / Strike count (min-1) [Time / min]Fastest / 0-3,600 / 0-3,800Strong / 0-3,200 / 0-3,600Medium / 0-2,100 / 0-2,600Weak / 0 to 1,100 / 0 to 1,100Wood / 0-1,800 / 0-3,800Bolt (when rotating forward) / 0 to 3,600 / 0 to 3,800For tex (thin plate) / 0-2,900 / Stop immediately after hittingFor tex (thick plate) / 0-3,600 / 0-2,600 Machine dimensions (mm) (length x width x height): 114 x 81 x 236Mass (kg) (including battery): 1.5Standard accessories: Plus bit 2-65 hook Work volume per charge (approximate) / screw tightening *Wood screws Ø5.4 × 90mm: Approximately 550Wood screws Ø4.3 × 65mm: Approximately 960Machine screw M8 x 16mm: Approximately 5,280 The industry's smallest tilt with a slim bodyApproximately 10.5 ° *Excellent cornering performance reduces come-out. Work near the wall is also comfortable. Recommended for work near the floor Bit runout industry's smallest "zero blur" *Double ball bearings are used for the bearings.Significantly reduces runout when using long bits. Both durability are compatible. New one-touch bit sleeveJust push in lightly without pulling the sleeve.Plug-in load reduced by approximately 50% (compared to our conventional model).Unexpected bit loss is also reduced, and the anvil rigidity is increased by about 25% (compared to our conventional 18V machine). Assisting more work "Easy 4 modes"The optimum mode can be selected according to the work.① Wood mode② Bolt mode③ Thick plate tex mode④ Thin plate tex mode ① Wood modeFully open the trigger to start tightening slowly, and automatic transmission for the fastest tightening. ② Bolt modeFastest instantly with normal rotation / trigger ON.Reverse / Automatic stop when nut loosens.(Reverse auto stop) ③ Thick plate tex modeReduces screw head skipping and come-out. ④ Thin plate tex modeAfter the screw penetrates, it automatically stops when hit is detected. Blow mode 4-step switchingSwitch to fastest / strong / medium / weak with the "hit button".Supports everything from tightening with priority on power and speed to delicate tightening of machine screws. Hand buttonYou can switch the striking mode while holding the grip. Mode memory functionBy pressing two buttons at the same time, you can register one frequently used mode.Switch between "mode used until just before" and "registration mode" with the hand button. Compact 114mmThe overall length is further shortened, and excellent workability even in tight spaces. Always lit With "light mode"① Set the forward / reverse switching lever to the neutral state ...② When you pull the trigger, the LED light turns on / off.If no operation is performed, the light turns off automatically after about 1 hour.There are two LED lights on the left and right. As simple lightingCan also be used as simple lighting in "light mode". "Apt" drip-proof and dust-proofThis product is designed to reduce the effects on water and dust, but we do not guarantee that it will not be damaged by water or dust. Equipped with high power brushless motorHigh output, high durability, maintenance-free. Other features・ With hook・Variable speed・ Forward / reverse switching・ With brake

Price: 182.13 USD

Location: Kanagawa

End Time: 2023-09-11T14:23:37.000Z

Shipping Cost: 0 USD