Manfrotto 054 conversion set 4 arca swiss kirk markins wimberley acratech rrs

Description: Part Number # M496 Plate with F62 clampProduct Description: New Hejnar Photo conversion set for Manfrotto 054 and 055Mag Ball Head. This combination of plate and standard arca swiss clamp will let you use any arca type equipment with this ball head. Clamp can disconnected from plate and use independent on other equipment if needed. It is the best quick release system for tripods and monopods when combined with Arca style ball head and quick release clamps.Adapter plate is attached to Manfrotto head in few simple steps.1) Remove original Manfrotto platform..2) Align slots on plate back with island on Manfrotto post.3) Attach conversion plate in place of original Manfrotto platform using original center screw.4) Attach clamp to adapter plate using two side holes and provided 10-32 screws. Compatible with:Markins including level release clampReally Right Stuff, including level release plate.Arca SwissWimberleyKirkPhoto ClamFoba Vanguard ABH Series Ball Heads (ABH is Vangaurds only Arca-Compatible series)Custom BracketsJobu DesignsAcratechOther Arca swiss type products Plate Specification:2.3750 inch long2 inch wide3/8 inch thick plusMade from 6061-T6 Aluminum.Made in USABlack hard coat anodized.Clamp Specification:2.375 inch longWeight 3.6oz (103g)Center socket is countersunk on top but also threaded 3⁄8”-16.Two outside holes are taped 1/4-20 and 30mm apart from each other.2.6mm deep relief grooves guarantee compatibility with most plates/rails.Relief groove prevents free fall when the clamp is not fully closed and your plate has safety stopsKnob is captive. Knob stops at maximum opening - cannot be lost in the fieldKnob is made from one part aluminum. No room for dust or sand.Back side has grove to match some ball heads connection and preventing it from twisting.Precision C.N.C. machined from 6061-T6 AluminiumCompatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release plates.Stainless steel hardware.Black hard coat anodized surface.Made in USAAuction Includes:One adapter plate.One F62 ClampTwo 10-32 screws for clamp mount.Hex key for ¼-20 screw and 10-32 screws.Shipping Information:Free Shipping with USPS First Class Mail. Tracking information provided. USA Costumers please note that USPS packages may travel much longer than the estimated delivery time and tracking information is not always updated daily. If your order is time sensitive, you need daily tracking update please use FedEx, UPS or Express Mail as delivery service during checkout.

Price: 103 USD

Location: Bloomingdale, Illinois

End Time: 2023-12-07T14:55:28.000Z

Shipping Cost: 0 USD