Marshall DSL Series DSL40CR 40-Watt 1x12" Tube Combo Amp

Description: DJ GEAR INSTRUMENT GEAR LIVE SOUND RECORDING MICROPHONES HEADPHONES ACCESSORIES SOFTWARE LIGHTING BUNDLES Authorized Dealer Marshall DSL Series DSL40CR 40-Watt 1x12" Tube Combo Amp - Used 40-Watt Combo Guitar Amp - Used - Description The DSL 40 Combo features. The combo is loaded with a 12” G12 V-type speaker chosen for its ability to deliver exceptional tone and flexibility. The CLASSIC GAIN channel delivers sparkling clean sounds through to the more aggressive break-up of a Marshall JCM800 amplifier. The ULTRA GAIN channel provides even more distortion and break-up for players looking for higher gain tones from their amplifier. Both channels share a passive three-band EQ, with BASS, MIDDLE and TREBLE controls. The EQ section also features Tone Shift, which when activated reconfigures the pre-amp mid frequencies making DSL ideal for contemporary metal tones, especially when combined with higher gain settings. The DSL features professional quality digital REVERB and a series FX LOOP. The LOW POWER function adds a further dimension to the DSL sound, giving you rich valve tone at an ear-friendly volume. For the most demanding players, the DSL 40 Combo and DSL 100 Head feature MIDI compatibility meaning outboard MIDI equipment can access all the features needed to perform. Important Safety Instructions Mains Input & Fuse: The specific mains input voltage rating that your amplifier has been manufactured for is indicated on the rear panel of the amplifier. Your amplifier is provided with a detachable mains (power) lead, which should be connected to the MAINS INPUT socket on the rear panel of the amplifier (Rear Panel Function #26). The correct value and type of mains fuse is specified on the rear panel of the amplifier. Never attempt to bypass the fuse or fit one of the incorrect value or type. Transporting Your Equipment : Please ensure that your amplifier is switched off, unplugged from the mains electricity supply and all removable cables have been disconnected from your equipment before attempting to move it. Important Set Up Information :When using the DSL20HR, or the DSL20CR with an extension speaker cabinet(s), make sure that the speaker cabinet(s) is connected to the correct impedance loudspeaker jack socket(s) on the rear panel of the amplifier. See the LOUDSPEAKERS guide in this manual for specific information regarding impedance matching (Rear Panel Function #33).Ensure that the POWER switch is set to the OFF position (Front Panel Function #25).Ensure the OUTPUT switch is in the STANDBY position (Front Panel Function #24).Connect the supplied mains (power) lead into the MAINS INPUT (Rear Panel Function #26) first and then into an electricity outlet.Ensure that the volume controls on the front panel are set to zero (Front Panel Functions #19 & #21).Plug your guitar into the INPUT jack socket (Front Panel Function #1).Switch the amplifier ON using the POWER switch, wait for a few minutes and then switch the OUTPUT switch to either the LOW or HIGH position.Turn the front panel POWER switch on and wait for a few minutes before going to point 9.Turn the selected channel volume up to your preferred level and your amplifier is ready to play Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:This device may not cause harmful interference, andThis device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and the receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help Features/Specs InputInput jack socket for your guitar cable. Use a good quality screened/shielded guitar cable to help prevent noise interference Classic Gain Channel GainControls the gain level for the CLASSIC GAIN channel. As the amount of gain increases, so will the distortion level in your sound. Mode Status LedThis LED lights green to indicate that CLEAN mode is selected and red to indicate CRUNCH mode is selected. VolumeControls the volume level of the CLASSIC GAIN channel Clean/CrunchPress to select CLEAN or CRUNCH mode. The CLASSIC GAIN channel’s two modes take your sound from clean to overdriven tones Ultra Gain Channel GainControls the gain level for the ULTRA GAIN channel. As the amount of gain increases, so will the distortion level in your sound. Mode Status LedThis LED lights green to indicate that OD1 mode is selected and red to indicate OD2 mode is selected. VolumeControls the volume level of the ULTRA GAIN channel Od1/Od2Press to select OD1 or OD2 mode. The ULTRA GAIN channel’s two modes go from an open, high gain overdrive to a mid-boosted tone with even higher gain possibilities. Front panel functions Equalisation section TrebleControls the higher frequency content of your sound. Turning clockwise will increase the highs making the sound brighter and more crisp. MiddleControls the middle frequency of your sound. Turning clockwise adds girth. Turning anticlockwise reduces the middle frequencies ‘scooping’ your sound – this is accentuated when used in conjunction with Tone Shift. (Front Panel Function #13). BassControls the amount of lower frequency, or bottom-end, in your sound. Turning clockwise will increase the bottom-end making the sound fuller. Tone ShiftTone Shift reconfigures the preamp EQ network adding a new dimension to tonal shaping. PresenceControls the amount of higher frequencies of your sound. Turn clockwise to add crispness and bite for a more cutting tone. PRESENCE is a power-stage function and acts independently of the preamp EQ controls. ResonanceControls the amount of lower frequencies in your sound. Turning this control clockwise adds a resonant bass boost, increasing bottom-end. RESONANCE is a power-stage function and acts independently of the preamp EQ controls. Reverb Section Reverb ClassicControls the REVERB level of the CLASSIC GAIN Channel. Reverb UltraControls the REVERB level of the ULTRA GAIN Channel. Master Volume Section Master SelectThis switches between MASTER 1 and MASTER 2. Master 1Controls the overall volume level of the amplifier when selected. Master Status LedThis LED lights green to indicate that MASTER 1 is selected and red to indicate MASTER 2 is selected. Master 2Controls the overall volume level of the amplifier when selected. Loop Status LedThis LED lights red to indicated that the FX LOOP is On. It is unlit when the FX LOOP in Off. Loop On/OffThis switch activates and deactivates the FX LOOP OutputThis three position rocker switch combines STB (standby) and HIGH/ LOW output power functions. The output stage and power control for this amplifier has been designed to deliver the optimum tonal performance at all power levels. The HIGH and LOW output functions allow the user to choose between two configurations of the internal power supply. These two configurations give the choice between two output power levels, but ensure that the output valves behave in the same way for both. This means the amplifier can be put into LOW power mode without compromising on tone. PowerMains power ON/OFF switch. Mains InputConnects the amplifier to the mains electricity supply Midi InConnect your external MIDI device to the MIDI IN socket.MIDI commands allow the remote control of some front panel functions (refer to MIDI implementation chart at the end of this manual).The MIDI receive channel is factory-set to channel 1. In order to set a different channel, press and hold the Loop On/Off switch (Front Panel Function #23) while powering up the amplifier to activate MIDI waiting mode. The LED will flash until a valid MIDI command is received. The MIDI receive channel will be set to the channel of that command.To select MIDI OMNI receive, put the amplifier into MIDI waiting mode and REAR PANEL FUNCTIONS DSL40CR REAR PANEL DSL100HR REAR PANEL ENGLISH ENGLISH 26 27 28 then press and hold the Master Select switch (Front Panel Function #18) until its LED flashes. Fx Loop ReturnConnect the output of an external FX pedal or processor. Fx Loop SendConnect the input of an external FX pedal or processor. F/SConnect the supplied 2-way footswitch or the optional 6-way footswitch here. Audio InConnect an external device here to practice with or to jam along to music. Emulated OutEmulated line level output for headphones or connection to a mixer. The DSL is equipped with a high quality emulated output using Softube-designed studio cabinet emulation. This ensures that your headphone and output signal from this socket provide the best possible tone for practice or recording. Rear Panel Functions Loudspeakers There are five speaker outputs available. They are labelled according to the intended impedances:1 x 16 OHM: connect a single 16 Ohm speaker cabinet to this jack.1 x 8 OHM or 2 x 16 OHM: connect a single 8 Ohm speaker cabinet or two 16 Ohm speaker cabinets.1 x 4 OHM or 2 x 8 OHM: connect a single 4 Ohm speaker cabinet or two 8 Ohm speaker cabinets. We are authorized dealers for all these brands. Click a logo to see our listings. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost. Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES. We provide free shipping to the contiguous 48 United States, on most items. Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost. We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit. We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service. Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Please contact us for a Return Authorization before returning any items.

Price: 659.99 USD

Location: Winchester, Virginia

End Time: 2024-11-29T19:00:48.000Z

Shipping Cost: 0 USD