Massager Muscle Stimulator Acupuncture Electrical Pads Pulse Low Frequency

Description: How to use (must be read carefully before buying) Step 1:Place the electrode pads on the body(Note: 2 electrode pads / 4 electrode pads must be connected at the same time) Step 2:Connect the electrode pads to the electrode wires and connect to the device Step 3:Start the device, set the mode, and adjust the gear Why do you need this massager? The massager based on the physics, bionics, biological electrical, traditional Chinese medicine science of channels and collaterals principle. It combined with a large number of clinical practice and adopted the modern microcomputer control technology research and development of the latest generation of health care products. It not only has the function of acupuncture, thump, massage, cupping, massage, scrapping, thin body, but also has unique immune regulating function, and ingenuity to develop normal temperature infrared spectrum electrode, make the therapy effect more wonderful. Identity, Function and Therapy Theory: This electronic pulse massager has distinct lenitive therapy function for the symptom of cervical spondyosis, periarthritis humeroscapularis, arthritis, strain of lumbar muscles and etc, and it can alleviate peripheral nerve paralysis effectively. In addition, this machine can bring flexible massage for the whole body due to electrode pads, thus it is very useful to dissipate fatigue, alleviate myalgia and promote blood circulation. It has multi-function of Press, Knead, Vibrate and Thump. This machine has combined therapy function for Arm, Joint, Feet, Shoulder, Waist and Leg. The low frequency therapy acts on human body though low frequency pulse current, It makes human body react by its incitement so as to promote partial blood circulation, Strengthen the adjusting function of the nervous system to attain the purpose of eliminating fatigue, alleviating hyperinesia, reliving pain and subduing inflammation and etc. The body reaction is to be carried out by the combined action of nerve and body fluid. Operating Instructions: 1.Gently Open the cell box, put four pieces of 1.5V batteries into it, and close the cell box. (6V power adaptor can be also applied) 2.Stick the electrode pads onto appropriate parts of the body that need to be massaged, and then connect conducting wire with electrode pads correctly. 3.Open the on-off button of the main machine, and the sketch of the working mode under manual's procedure will display on the screen. You may choose different therapy modes ( Press, Knead, Vibrate and Thump) just according to your personal preference. 4.The therapy speed and intensity of the machine can be adjusted flexibly, you can tune the intensity knob of the main machine from lower to higher. 5.You can also press the button | ARM", "JOINT", "FEET", "SHOULDER", "WAIST" AND "LEG" to choose different parts of therapy. 6.Default working time of the machine is thirty minute, and the machine will automatically stop once it continually works for thirty minutes. The machine also has five-second self-checking function, and the machine will cut off once removing the electrode pads from the skin within five seconds automatically. 7.Its double-channel system can make two persons to use it at the same time, and the intensity & time can be adjusted separately. 8.When stopping the machine, pis turn the power off through switching the on-off button, and reset the power switch once it needs to be worked again. Tips: 1.If the device is turned on within 20 seconds without any operation, the device will automatically shut down. 2.Press and hold the switch key for 3 seconds to turn on the machine. If you want to turn off the machine after use, press and hold the switch key for 3 seconds to turn off the machine.

Price: 22.81 USD

Location: China

End Time: 2024-11-27T05:59:22.000Z

Shipping Cost: 0 USD