Mazda MX5/Miata NC/MK3 Boot | Trunk - Luggage Rack No Clamps No Damage Revo-Rack

Description: In manufacture since 2016 Revo-Rack is a completely different, completely new type of Mazda MX5 Luggage Rack, only manufactured by us. It was conceived designed and engineered for the ND MX5 in 2016.It eliminates the risk of paint damage, caused by steel clamps or straps on the fragile boot/trunk lid edge/surface. Revo-Rack can be fitted in under a minute without any tools. Please watch the video's below.Revo-Rack fits the fabric and metal roof NC. The roof can be operated with the Revo-Rack fitted on the PRHT / Roadster coupeWith the Revo-Rack MX5/Miata luggage rack no metal touches your Mazda only soft rubber vacuum cups these use the pressure of the atmosphere to secure the rack to your Mazda's boot.With all the effort Mazda's engineers went to to remove weight and add lightness to the ND this rack follows that ethos weighing only 1.672kg. Why a Revo-Rack MX5 Luggage Rack ?Fits in 30 seconds no tools required, no fiddly brackets, straps or bolts.Conceived designed and engineered for the MX5/Miata.Tested to ISO/PAS 11154:2006 Road vehicles -- Roof load carriers & European Directive for the General Safety 2002/95/CEWith the tiny panel gaps on the modern MX5/Miata (2-3mm) fitting a conventional rack without damaging the boot/deck lid edge or surface is almost impossible, there is literally no space for a clamp.Lightweight aluminium & magnesium frame weighs 1.7kg will never rust.Hand polished and anodised finish has more luster/shine than stainless steelNo straps or clamps on the boot surface/edgeRevo-Racks load carrying capacity has been rated at 20 kg / 45Ibs by TUV ItalyRevo-Rack has been extensively tested by TUV Italy. It underwent force tests, speed tests and braking tests - It passed all of the these. The only convertible luggage rack globally that has been tested in this way.Supplied with two luggage straps and storage bagMade in the UK by the boot-bag groupSigned for delivery by DHL with a one hour delivery slotDespatched next working day on a next day service if ordered before 3pm i.e. order Monday at 3 receive WednesdayTested to ISO 11154 - see video belowWe ship globally The Rack Frame :This MX5 luggage rack is manufactured from 25mm/ 1" T5 tubing this is an aluminium and magnesium alloy ( it will never rust ) As a result the rack frame weighs only 1.672kg / 3.6lb perfect for todays aluminium and composite boot/trunk lids. The cross bars are machine welded in place to ensure consistency, the rack is hand polished then anodised. The rack measures 900x420mm / 36"x17" The Vacuum Cup Supports :The rack is secured to your MX5's boot/trunk lid using three 120mm vacuum cups, rated as capable of holding an 18kg/40lb load each, technically the rack can hold 54kg.The vacuum cup technology that Revo-Rack uses has existed for over 40 years it was developed in the film industry in the late 1960's to hold film camera's to cars, and is still in use today. Vacuum cups employ the force of atmospheric pressure to grip a surface: When a vacuum exists between the cup and the surface on which it is attached, the weight of Earth's atmosphere holds the cup in place with incredible force. These are not suction cups that produce a vacuum as they pull away from the surface. Revo-Racks vacuum cups use a hand-actuated pump to efficiently remove air from between the rubber pad and the attaching surface thus creating a much more reliable hold. Because the full face of the pad is brought into contact with the boot lid, distortion is reduced, allowing the cup to be used with very little risk of damage.The Revo-Racks vacuum cup's pump feature a plunger with a red line, which serves as a vacuum indicator. This safety device is still recognised as one of the most reliable warning systems available. A few strokes of the plunger evacuate the vacuum pad, causing it to seal securely to the attaching surface. When the cup is attached completely, the plunger stops moving and the red line is hidden within the pump. A visible red line indicates if air has leaked back into the pad, making vacuum insufficient to use the cup. However, if the red line becomes visible while the cup is in use, a check valve allows the user to re pump the cup without losing the remaining vacuum.Lifting on the release tabs near the edge of the pad allows air to refill the evacuated space, so that the vacuum cup detaches completely. The racks sits 7.5cm / 3" off the boot/trunk lidFor more detailed information please see www.revo-rack.com Revo-racks design is protected by UK, EU and North American Patents. Mazda Miata/MX5 ND & RF Trunk Luggage Rack : Revo Rack - YouTube Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] --> Please note : All EU orders are shipped from our Dutch based warehouse with no import VAT or duty to pay.

Price: 449.95 GBP

Location: Buckingham

End Time: 2024-11-21T13:35:19.000Z

Shipping Cost: 120.67 GBP