Megger DLRO 10HD Digital Low Resistance Ohmmeter

Description: Visit Our Store Visit Our Rental Store Megger DLRO 10HD Digital Low Resistance Ohmmeter Item Condition: Excellent condition We classify excellent condition items to be used items that show very minor signs of use when viewed up close. From a distance they may look new. Item Description Megger DLRO10HD Digital Low-Resistance Ohmmeter with accessories seen in photographs. Unit is used and in excellent condition with some signs of previous use. Thoroughly tested to be in working order with a 60-Day warranty. Ships from Canada, Ontario with an expedited service. For questions please contact us. We appreciate your business! Product Features: Combining the ultimate simplicity of operation with a rugged IP65 case designed for stable ground and bench operation, this ohmmeter features rotary switch controls that are simple and easy to operate in all weather conditions and with gloved hands. It provides significantly enhanced compliance and delivers 10 A into measurements up to 250 mΩ and 1 A up to 2.5 Ω. Additionally, a large, clear, backlit LCD is easy to read from a distance. Test Modes Normal mode is initiated by pressing the 'Test' button after connecting the test leads to the unit under test. The continuity of all four connections is checked. Current is applied in both forward and reverse directions following which measurement is displayed. Automatic mode is started as soon as the probes make contact. Forward and reverse current measurements are made and the average value is displayed. This mode is ideal when working with handspikes. Each time the probes are removed and reconnected to the load a new test will be performed without the need to press the test button. Automatic unidirectional mode applies current in one direction only to speed up the measurement process. However thermal EMF resulting from dissimilar metal bonds can cause lower accuracy. The test starts automatically when probes are connected. Continuous mode allows repeated measurements to be made on the same sample. Simply connect the test leads and press the test button. The measurement is updated every three seconds until the circuit is broken. Inductive mode is selected when measuring resistance on, for example, motors and generators. When measuring inductive loads it is necessary to wait for the voltage to stabilize as the inductive element is charged. Test leads are firmly connected to the device under test and the 'Test' button is pressed. The instrument will pass the selected current through the sample continuously in one direction only and take repetitive readings that will gradually decrease to the true value as the voltage stabilizes. The operator decides when the result is stable and presses the 'Test' button to terminate the test. Highlights: High or low output power selection for condition diagnosis Rechargeable battery or line power supply, continuous operation, even with dead battery 10 A for 60 seconds, less time waiting to cool, great for charging inductance High input protection to 600 V, inadvertent connection to line or UPS voltage will not blow a fuse Heavy duty case: IP65 lid closed, IP54 operational (battery operation only) Rotary mode switch with bidirectional (current reversal with averaging cancels thermal EMFs), unidirectional, automatic, continuous, and inductive modes Interchangeable test lead terminations Download to PowerDB Rugged case well suited to transportation with shoulder strap and lead set pouch Removable lid facilitates easy test lead connection Operational ingress protection is IP54 (battery power only) ensuring protection from the elements 7 Ah lead acid battery provides extended operation and can be charged whilst operating from mains power Large, clear LCD display with backlight and contrast adjustment Auto power off function conserves battery Specifications Resistance/Current Ranges Parameter Specification Green Ranges Indicate low output power (<0.25 W) outputs Red Ranges Indicate higher 2.5 W (1 A) and 25 W (10 A) power outputs Resolution and Accuracy Test current accuracy: ±10% Voltmeter input impedance: >200 kΩ Maximum lead resistance at 10 A: <100 mΩ Temperature Coefficient <0.01% per °C, from 5 to 40°C Maximum Lead Resistance 100 mΩ total for 10 A operation irrespective of battery condition Noise Rejection Less than 1% ±20 digits additional error with 100 mV peak 50/60 Hz on potential leads A warning will show if hum or noise exceeds this level Selection Mode: Left rotary switch Range: Right rotary switch Display Size/Type Main 5 digit + 2 x 5 digit secondary displays Backlight LED backlight Power Supply and Environmental Conditions Parameter Specification Power Supply Battery type: 6 V, 7 Ah sealed lead acid Battery life: >1000 automatic (3 second) tests Charge time: 8 hours Voltage input range: 100 to 240 V, 50/60 Hz, 90 VA Automatic Power Down 300 seconds Environmental Conditions Reference conditions: 20°C ±3°C Operating temp and humidity: 14 to 122°F (-10 to 50°C), <90% RH Storage temp and humidity: -13 to 140°F (-25 to 60°C), <90% RH Maximum altitude: 6562' (2000 m) to full safety specifications Package Includes Megger DLRO 10HDDigital Low Resistance Ohmmeter Megger Test Lead Set 2 x Alligator Clip Returns Shipping Rentals About Us Returns Customer satisfaction is our #1 priority. If for any reason you are not 100% satisfied within the first 30 days after the receipt of your purchase, you may return the unit for exchange or a full money back refund, excluding any shipping charges. Please see Ebays money back guarantee. All merchandise that was received damaged from the shipping carrier beyond what was described in the item listing must be reported within 3 days of receipt of your purchase. Processed returns will be tested for functionality prior to a refund being issued. All items not returned in original condition or missing packaging will be subject to a 10% restocking fee. Shipping We ship worldwide! We primarily use DHL express and FedEX for international and national shipments. Orders can only be shipped to addresses provided by Ebay. If you require a shipment to be sent to an address different than what is displayed on your Ebay profile then please update your information on Ebay prior to purchasing. We use fixed rate shipping quotes that are accurate to most countries but are subject to adjustments for remote locations prior to order completion. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying, These charges are normally collected by the delivering freight (shipping) company. Rentals At CNTautomation, we offer flexible rental options for our lab equipment. All equipment is professionally serviced and tested, ensuring reliable performance. With competitive rates, flexible terms, and expert support, renting from us is a hassle-free way to get the equipment you need without a long-term commitment. Visit our Lendus Marketplace or contact us to learn more about our rental options and find the right equipment for your project. About Us We offer the best prices and customer service for used/new technical and specialty electrical equipment! We help our clients meet their goals by providing quality customer service and reliable equipment at excellent prices. All our equipment is professionally serviced and tested before being listed unless otherwise stated. For questions don't hesitate to contact one of our team members. Warranty Buy with confidence! Tested equipment backed by a 60-Day warranty (unless stated otherwise). We professionally package your technical equipment for safe transport, we use heavy weight double wall boxes with padding and anti-static packaging for sensitive electronic equipment. Express Shipping Fast shipping with orders processed the same or following business day! We know how important quality equipment is to your business and work diligently to make sure you receive your order as quickly as possible. We only use trusted shipping providers and watch your order every step of the way. Recycle unused equipment We help our customers save time and stay efficient by purchasing your under utilized technical equipment by offering trade-in value for new equipment or purchasing your equipment outright. Contact us to find out more information on how we make selling your equipment a quick and easy process.

Price: 4566.11 CAD

Location: Ontario

End Time: 2024-12-15T17:59:56.000Z

Shipping Cost: 0 CAD