MINTY Kenwood KR-5400 Receiver, New LED's & Real Walnut Side Panels, Serviced

Description: A minty example of the Kenwood KR-5400, new real walnut side panels, all new LED's, cleaned & serviced. The bias was set to factory spec of 30mv. The face plate was removed, cleaned & polished with Blue Magic. The case was removed, cleaned & restored, dust was blown out from the interior. All knobs and switch covers were removed and cleaned, all potentiometers and switches were cleaned and treated with Deoxit D5 or Deoxit F100L Fader Lube for long term protection. All functions and speaker connections were tested. A+B or A+C does not work but they work separately, either A or B or C. Hifiengine review: Reviewed Jun 13th, 2021 by roberflas"This is one of the big receivers that came from 70's era. Sound so big and warm, is a delicious.Great tuner section with a very good sensitive and selective FM. Great in all details, up to THREE pairs of speakers, a stereo selector with only L, only R, stereo, reverse stereo and mix L+R. Full of details and sound. One of my best" Audiokarma user Ponoka writes:"The Kenwood 5400 was a very capable mid-range receiver. Purchased one new in 1976 along with pair of Altec 891a speakers. Liked my rock loud and punchy an the system did not disappoint. I agree with comment above regarding loudness button. Put it on and then adjust the base level appropriate to your room and volume. I found it unnecessary at louder volumes, but the Altecs had a lot of bass." Just Audio posted:"The Kenwood KR-5400 is the most sophisticated stereo receiver ever offered at a medium price. It delivers more power than most listeners will ever use. And it combines this performance with features and controls that rival those of more expensive separate tuners and amplifiers.Kenwood utilizes the finest parts and materials and incorporates the most advanced engineering concepts in this fine unit, to assure you of top performance through years of constant use. From preamp yo power amp to tuner section, the KR-5400 is a receiver you will find hard to beat." SpecificationsTuning range: FM, MW Power output: 35 watts per channel into 8 ohms (stereo) Frequency response: 10Hz to 40kHz Total harmonic distortion: 0.5% Damping factor: 50 Input sensitivity: 2.5mV (mic), 2.5mV (MM), 150mV (line) Signal to noise ratio: 65dB (mic), 70dB (MM), 90dB (line) Output: 150mV (line), 30mV (DIN) Speaker load impedance: 4 ohms (minimum) Dimensions: 19 x 6 x 13-5/8 inches Weight: 25.4lbs Year: 1974 ALL ITEMS ARE DESCRIBED AS BEST AS POSSIBLE AND DUE TO THE NATURE OF USED ITEMS ALL SALES ARE FINAL. I am very honest about any issues that exist, just check my feedback. One buyer reviewed me as “Honest, Honest, Honest Seller”. I treat buyers like I would expect to be treated. I am a hobbyist that buys items that need help, clean/fix them up, enjoy them for a while and sometimes sell them. I do not work on other people's equipment. If you need someone to service your equipment, I recommend Just Audio near Baltimore, MD. If you need help hooking up anything you buy from me, just message me and I would be more than happy to assist. Check out the photos. The photos display exactly what this item is. I would like to guarantee this item. However, too many unprincipled buyers that strip parts and then wanted to return electronics as being defective force me to protect myself from this type of abuse. I will pack well and insure the package during shipping.•Nothing else, no further warranties or guarantees are implied. This vintage item is being listed and sold AS-IS because of parts swappers, people hooking stuff up wrong and scammers.•I video record the unit working, as well as the process of both packing and shipping so that there is concrete evidence that the item I sent is what was listed. I will also have video recordings of returns being opened. I will not only take this evidence to eBay but I will take legal action as Mail Fraud is a Federal offense.

Price: 449.99 USD

Location: Annapolis, Maryland

End Time: 2024-10-07T16:22:08.000Z

Shipping Cost: N/A USD