Monport 40" x 64" 150W CO2 Laser Engraver Autofocus CO2 Laser Marking Machine

Description: Monport Fireproof 150W CO2 Laser Engraver Cutter Machine, 40X64inch working Bed, Ruida Control System, with Red Dot Pointer Autofocus Air Assist and LightBurn Compatible for Wood Acrylic More Dimension Machine Dimension: 84.6'' x 59'' x 35'' ( 215cm x 150cm x 90cm ) Package Dimension: 89.4" x 65.4" x 46.9" ( 227cm x 166cm x 119cm ) Working Dimension: 40" x 64" ( 100cm x 160cm ) Pass-through Dimension：2.9'' x 54.9''（7.5cm x 139.5 cm ) Max Engraving Speed: 800mm/s Max Cutting Speed: 30mm/s ( actual speed depends on material ) Max Engraving Depth: 19.05mm Min Engraving Depth : 0.01 mm Focal Lens Diameter: 18mm Mirror Diameter: 25mm Max Z-depth: 13.7" Net Weight: 790 lbs (360 kg) Package Weight: 808 lbs (366.5 kg) Material Capability Can safely engrave or cut any laser-compatible material Wood, glass, acrylic, fabric, leather, paper, cardboard, rubber Contact us with questions on specific materials not listed. If necessary, we can test it for you This laser engraving machine includes dual work platforms: a honeycomb bed for smaller objects and a firmer aluminum knife blade bed for larger, harder substrates like acrylic blocks. Its autofocusing system works with the bed's electronic platform to get you marking, engraving, and cutting your designs onto and into wood, paper and cardboard, plastics and acrylic, leather, fabric, and other nonmetallic materials more quickly and efficiently than ever before. Compatible with most third-party graphic software, the intuitive controls custom designed for our machines by Ruida's Ryxon subsidiary let you upload your designs using the included software or via the Ethernet or USB ports. Choose your substrate, adjust your parameters, and the laser will engrave and cut your design with pinpoint precision, while providing an installed air assist to blow debris clear of the laser as it is created! Monport 150W Benefits 🔥 Fireproof Viewing Window This viewing window is made from special fire-resistant polyester with iron frames. The melting point of this polyester ranges from 432° to 488° and the ignition temperature of it is over 1000°, which can dramatically decrease the possibility of fire accidents caused by the heat of laser burning the materials. 🔥 Enclosed Aeronautical Aluminum Rail Equipped with X and Y stepper motors, this rail features efficient power transmission with high precision. The enclosed rail is designed to avoid smoke and debris and prolong the service time of rail units. 🔥 Laser Protective Glasses for Free Lasers emit radiation in the invisible form of light. This pair of laser protective glasses is certified to protect your eyes against radiation damage by looking at the class 4 laser in any way (directly, indirectly, or even looking at the laser dot on a surface can damage your eyes). 🔥 Ruida Digital Controller Whether your chosen software is LightBurn, RDworks, AutoCAD, or CorelDRAW, this Ruida digital controller can support the given platform. The Ruida Controller with a digital display can control the laser head, start or stop projects, adjust laser power and speed settings and so on. 🔥 High Speed and Resolution The Engraving Speed is up to 800 mm/s;The Cutting Speed is up to 400 mm/s;The Resolution is up to 4500 dpi;3 LED light strips above the work bed provide illumination for precision;2.0" Focal distance provides high resolution and etching of tiny fonts 🔥 Autofocus Use the control panel to correct the focus automatically at the touch of a button — no more manual testing and adjustment. 🔥 Built-in Air Assist A built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise. 🔥 3-ways to Connect with PC End Two USB ports provide options including flash drive connectivity and a USB-to-USB PC connection. In addition, one ethernet port is also available for connection. 🔥 Red Dot Guidance The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance. 🔥 Automatic Safety Sensor The safety shutdown sensor helps stopping the machine even if the window cover is on. Once closed, press the “Enter” button to continue operation. 🔥 Laser System Laser Wavelength 10640 nm; Rated at over 150 watt; Recommended engraving speed: 100 - 500mm/s Recommended cutting speed: 1 - 30mm/s (actual speed depends on the thickness of material) 🔥 Mechanics Linear System— Enclosed aeronautical aluminum rails Motion— Equipped with stepper X, Y, Z axis, plus mechanical limit switches Cooling— Easy-to-setup water pump and hoses Air Assist— Built-in air assist with no external compressor required Ventilation— On-board exhaust fan, as well as an exhaust hose so you can vent the fumes to the outdoors Standard 110V, AC power connection 4-pin port connection for rotary axis devices Temperature Recommended Operating Temperature: 60-104 °F (16C-40C).Attention: the CO2 water temperature must be maintained at 60-70°F (16-21°C) Compatible Computer Systems ADVANCED FEATURES Fireproof Viewing Window This viewing window is made from special fire-resistant polyester with iron frames. The melting point of this polyester ranges from 432° to 488° and the ignition temperature of it is over 1000°, which can dramatically decrease the possibility of fire accidents caused by the heat of laser burning the materials. Ruida Digital Controller Whether your chosen software is LightBurn, RDworks, AutoCAD, or CorelDRAW, this Ruida digital controller can support the given platform. The Ruida Controller with a digital display can control the laser head, start or stop projects, adjust laser power and speed settings and so on. Autofocus Use the control panel to correct the focus automatically at the touch of a button — no more manual testing and adjustment. Red Dot Guidance The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance. Automatic Safety Sensor The safety shutdown sensor helps stopping the machine even if the window cover is on. Once closed, press the “Enter” button to continue operation. LightBurn Compatible Use LightBurn's complete set of artistic tools to create intricate patterns and stunning images that are easy to upload to your laser engraver. Package Contents A Pair of Laser Protective Glasses *1 Laser Engraver Machine *1 Water Pump *1 Storage Tank *1 Ethernet to Ethernet Cable *1 USB Type-A to Type-A Cable *1 Venting Exhaust Duct (4 ft. max. length) *1 Water Hoses *2 USB Drive with Software (RDworks) *1 Hex Wrenches *10 Double-sided Tape *1 Power Cord *2 Accessory Bag *1 Keys *2 Silicone Sealant *1 Instruction Manual *1 Stainless Steel Clamp *1 Warranty & Certifications 2-year warranty on all 150W laser machines and parts 1-year warranty on laser tube FDA Approved & CE Certified On Dec 2, 2024 at 17:16:28 PST, seller added the following information:

Price: 5999 USD

Location: Fontana, California

End Time: 2025-02-03T01:10:48.000Z

Shipping Cost: 0 USD