Nanosolar 2.6W Flexible CIGS Solar Cell - Lot of 10 NanoCells for a Total of 26W

Description: Nanosolar 2.6W Flexible CIGS Solar Cell - Lot of 10 NanoCells for a Total of 26WIntroducing the Nanosolar Nanocell 2.6W Lightweight Flexible CIGS Solar Cell Set! Harness the power of the sun with this lot of 10 high-quality solar cells. Each cell produces an impressive 2.6 watts of clean energy. Made with advanced CIGS technology, these lightweight and flexible cells are a perfect solution for various applications. Don't miss out on this rare opportunity to bring sustainable energy to your projects. Invest in the future with Nanosolar Nanocell! This is for a lot of 10 solar cells that total 26 watts. Each individual solar cell has a maximum electrical output (mppt) of 0.45 volts at 5.8 amps which calculates to 2.6 watts each. These CIGS solar cells took over 70 steps to produce on multiple machines with hundreds of workers in a 200,000 sf factory in San Jose California. They are made on thin flexible aluminum sheets which make them difficult to weld or solder even with Alumiflux solder flux paste. We have had success using double sided conductive tape to connect. You can see the video of the output 10 cells connected with the tape have produced in partial sun conditions. We find these cells even produce energy when placed under a light bulb. Manufacturers Specifications Raw Solar Cell Uncoated Rated Power: 2.6 Watts per cell Vmpp (V) 0.45 Impp (A) 5.8 Voc (V) 0.61 Isc (A) 6.7 Operating Module Temperature -40 to +85C Length: 165mm (6.5 inches) Width: 135mm (5.3 inches) Height: 0.4mm (0.02 inches) Weight: 18.5g per cell Raw Solar Cell Uncoated Lightweight Aluminum Structure CIGS Solar Cells which are Semi-Flexible Product manuals, data sheets, specifications, etc.... are available in the DOWNLOADS tab above. Contact us if you have any questions. These raw flexible solar cells are extremely rare and have never been offered for sale to the public before. These came from the last experimental production runs at the Nanosolar Facility in California. The facility and company was liquidated during September and October of 2013. We can ship these in bin racks of 1,000 cells and cartons of 6,000 cells if you would like larger quantities. These raw solar cells are very robust for CIGS, however, will degrade if not encapsulated in weather tight enclosure. Its interesting for experiment we have left a few exposed and un-encapsulated for 2 years and have found minimal degradation. The CIGS solar cells are made of aluminum and to connect them we have used double sided conductive acrylic adhesive tape made by 3M / Tape Case (1182). Nanosolar used ultrasonic metal spot welders to connect the cells in production We have found a spot welder does connect them but if the settings are not just right you will blow a hole through them or the connection is weak. We believe a combination of the 3M 1182 tape and spot weld may be the best choice for DIY applications. We have had many questions regarding cutting these cells. When these cells are cut they retain their .45 volts but the amps are reduced somewhat proportionally. You cannot use regular scissors or tin snips as these are made of 2 thin sheets of aluminum separated by energy producing compounds. If the top (negative) and bottom (positive) aluminum sheets touch it shorts the cell. We have successfully cut these cells with a water-jet cutter as well as a sharp bench shear set at 45 degree angle. It is possible to cut and then sand the cut edges back until the two sheets are separated but that is a tedious task and not recommended. Also we have noticed the cut cells are not as robust as the uncut cells even when accounting for the size differences of the cells. The positive output of the cell is indicated by the large area of metal (nickel coated aluminum) on the backside. On the front side, there is a thin strip of un-coated aluminum indicating the negative output of the cell. If you have any questions about these cells, feel free to ask. These cells are sourced from the manufacturing floor of Nanosolar in San Jose and are securely stored in air-tight bags with desiccant. Each cell has undergone proper output testing by Nanosolar and has been found to be highly durable. You can preview these solar cells at our facility in Ventura, California. Condition: New These Aluminum Solar Cells are New and Unused. They are stored in air tight sealed cartons with desiccant to prolong shelf life. They are in excellent new condition. Please view our photo set and contact us if you have any questions.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns

Price: 18 USD

Location: Ventura, California

End Time: 2024-01-11T09:53:36.000Z

Shipping Cost: 0 USD

Product Images

Nanosolar 2.6W Flexible CIGS Solar Cell - Lot of 10 NanoCells for a Total of 26W

Item Specifics

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Return policy details:

Brand: Nanosolar

System Configuration: Not Applicable

Type: Solar Panel KIt

Application: Agriculture/Farming, Aquaculture, Automotive, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine, Municipal, Pool, Recreational Vehicle (RV), Shed, Back-Up Power

Solar Technology: Monocrystalline

Features: All Daylight Conditions, Flexible, Portable, MWT Metal Wrap Through Technology

Resistance Properties: Not Applicable

Current Output: 10 A or Less

Current Rating: 2.1-2.5 A

Current Type: DC

Model: CIGS

Power: Less Than 100 W

Voltage: 10 V or Less

Charging Mode: MPPT (Maximum Power Point Tracking)

MPN: NanoCell

Power Source: Alternate Energy Solar Sun