NES 101 video add-on board, power led and 3D Printed Back *A/V out* NES top load

Description: VIDEO BOARD, 3D PRINTED BACK PANEL and POWER LED ONLY NES NOT INCLUDED !!! This 3d Printed back panel is printed using PLA filament and it is printed at normal speed to avoid any imperfections. I have other colors available, including RED, BLACK, and WHITE. This will avoid making holes on your console, if you ever want to upgrade to RGB in the future you can easily remove this and add an SNES style back panel that I will also be offering soon. The NES 101 (NES2 or TOP LOADER) is the improved version of the Nintendo Entertainment System (NES). It's redesigned smaller has cartridge port on top. These units are more reliable since it does not have the NES10 lockout chip and tend not to damage the game cart since no need to insert it and push down weakening the pins on the console and cartridge. Unfortunately, these models did not have the composite video or audio out (AV RCA OUT). But with this add-on board, you can add composite video out. I provide a self-contained kit, all wires are soldered on to the RCA connectors and amp is attached to 3d printed back panel. All you need to do is remove the RF adapter and power connector and solder 4 wires. The wires are color coded and when you purchase it I will send you the instructions on how to get this installed. If you do not feel comfortable installing this on your system, I also offer installation service that I add a video board and have audio out with a power led added to this as well. Please look at my other auctions if you are interested in that. I include the following1 pre-assembled Video board with 3D Printed back panel all wires attached to RCAs1 Pre-wired RED led ready to solder in1 power jack 2.1MMx5.5MM same as NES original (if you have aftermarket power adapter might not fit please check before purchasing) Link to step by step instructions (emailed to you). **The board comes with double-sided tape and its wrapped in heat shrink tubing so there will be no exposed connections to create any shorts. Also, it is attached to the 3d Printed back panel and does not touch the NES motherboard except for the wires that are soldered on. If you have any questions I am also available by email and if need be by phone to walk you through the process if the pictures and step by step guide is not enough. You will need the following tools (NOT INCLUDED).Security Bit 4.5 mm (Gamebit) can be found here on eBay for around $3Small Phillips screwdriverSmall flat head screwdriverSoldering Iron (preferably with a small tip)Solder sucker / Solder wickTin SolderDrillan NES 101 (NES2)and Possibly a small file.***Please note that the Nintendo modification should only be attempted by a person with adequate soldering skills and equipment. No warranty is expressed or implied. I also offer many other services for retro consoles. Examples:LED Add on lights for all classic consoles.Repair Blinking NES consoles.RGB for PC ENGINE/Turbografx/N64/SNES mini/NES (with NESRGB board purchase)Region select for different types of systems.Sega Genesis S-Video add on and repairsand many many moreAlso note that there are other services on ebay providing this type of add-on board. But keep in mind that I have over 80 video add on boards sold. When I started selling the video-add on boards those were no where to be found on ebay. So I saw the need and started making these for people to purchase. Buy with confidence just look at my feedback. Assembled in the USA!Please feel free to email me if you have any questions. NES NOT INCLUDED ! Add a map to your own listings. FREE Trial!

Price: 19.99 USD

Location: Sun City, California

End Time: 2023-12-16T03:36:59.000Z

Shipping Cost: 0 USD