New 100 ft. Radiator Cork/Rubber Gasket Tape for Bolt-On Applications & Tractors

Description: 100 Foot Premium Cork/Rubber Gasket Tape Green color for Bolt-On Applications & Tractors Description:100 foot length1/16" thick1 1/4" wideAdhesive on one side Johnson's Premium (Green color and no tape cloth) Gasket Tape offer excellent compressibility resistance to crushing and memory retention. This premium cork and rubber combination covers a broader range of applications than other gasket tapes (according to Johnson Mfg. Co), setting the new standard for Quality and Durability. Installations Instructions:Johnson's Premium Gasket Tape has no cloth backing. Avoid stretching this material when pre-punching bolt holes or when installing this tape on the header or tank.For best results, please consider the following:(1) Proper preparation of the tank and header surfaces before installing a new gasket or gasket tape is essential. Unless corrected, any damaged or irregular surfaces may make it impossible to form a tight tank-to-header seal. (2) Remove backing and apply gasket tape to a clean, flat, dry header or tank flange. Sand blasting these mating surfaces helps reduce the extrusion of gasket tapes. (3) Cut out the bolt holes. It is not good practice to punch or turn bolts through compressable gaskets or gasket tape. (4) Do not apply a separate adhesive or RTV Silicone as it may chemically degrade this gasket tape and/or contribute to its extrusion, crushing and premature failure. (5) Puzzle cut the corners or overlap the short end pieces by 1 /4 " on each long side piece. Not a full overlap! (6) Do not over-torque header bolts! Most 1 /16" thick gasket tape applications call for 13-15 foot pounds of torque, evenly applied to 5 /16" dia. bolts, spaced in a regular pattern of 1-1 /2 " , or more between centers; 18-20 foot pounds for 1 /8 " thick gasket tapes. Notice: Somewhat less torque is suggested for larger diameter bolts and/or bolts that are spaced closer together. (7) Gasket tapes relax (lose some of their memory) so after 15 minutes, re-torque all the bolts using the original setting, as well as to insure that none were missed. (8) Using new grade 5 bolts, flat washers, lock washers and nuts greatly optimizes running torque. (9) Caution: On low-flow radiators where RTV is used to seal the baffle, allow sufficient time for the silicone to cure before introducing coolant into the radiator. (10) Provide torque information (par 6) as necessary, to installers with a history of tightening header bolts. ****See other item for Standard Gasket Tape from The Barbee Co. (Brown in color with cloth backing) Over 20+ years supplying radiator shops and the automotive industryIf you need help or have a question, please visit trojanradiator SHIPPING TO CONFIRMED ADDRESS ONLY INTERNATIONAL BIDDERS: SELLER WILL PREPARE CUSTOMS DOCUMENTATION AS PER DESCRIPTION AND PRICE. ALL DESTINATION CHARGES ARE TO THE ACCOUNT OF THE BUYER. SELLER IS NOT RESPONSIBLE FOR ANY DELAYS CAUSED BY INTERNATIONAL PROCESSING OR DESTINATION CUSTOMS DELAYS.

Price: 83 USD

Location: Rowland Heights, California

End Time: 2025-01-20T00:54:05.000Z

Shipping Cost: 0 USD