NEW Caloritech PH20011 Electric Control Panel Enclosure Heater, 120V, 1Ø, 200W

Description: New and unused, sealed in factory packaging. Packaging shows minor shelf wear, dust, etc. from long term storage and transport.Location: OFB2Product SummaryCaloritech Type "PH" Electric Control Panel Enclosure Heaters are fan-forced air heaters designed to control the environment within enclosures by maintaining a stable temperature. Effects of low temperatures such as corrosion, freezing or condensation will adversely affect the components inside control panels. The Caloritech PH enclosure heater provides an optimal performance environment for the critical components contained within the control panel.Features + BenefitsFan AUTO/ON switch to prolong motor lifeExternally adjustable thermostat 0°F to 100°F (-18°C to 38°C)Pilot light for ‘HEAT ON’ indicationTerminal strip provides quick installation with both stranded and solid wireHigh temperature safety protectionOptional DIN rail mountingCSA C/US approvedLight WeightLow MaintenanceAluminum alloy outer casing protects interior componentsScrew fasteners provide easy access to components inside casingHeater Selection The wattage requirement is determined from a consideration of the surface area, insulation properties of the enclosure or space and the temperature difference between the ambient and the enclosure. For small enclosures (less than 100 ft2 surface area) conservative values for heat losses are as shown in Table 1. Example: To find wattage requirements in an uninsulated enclosure 2’ x 3’ x1’, which must be held at 40˚F in a 10˚F outdoor ambient, with internal electrical components that generate 80 watts. Surface Area = 2[(2’ x 3’) + (2’ x 1’) + (3’ x 1’)] = 22 ft2 From Table 1, an uninsulated outdoor enclosure requires 7 watts per square foot for each 10˚F temperature difference. Temperature Difference = 40˚F - 10˚F = 30˚F Wattage Required = (30˚F ÷ 10˚F) x 7 W/ft2 x 22 ft2 = 462 watts Heater Wattage = Wattage required - component wattage = 462 - 80 = 382 watts Use one PH400 rated at 400 watts. For enclosures requiring more than 800 watts, two or more PH heaters may be usedInstallation - The Caloritech PH enclosure heater should be installed in the center of the cabinet and as low as practical for the best possible heat distribution. The optimum efficiency is obtained when the unit is mounted in a vertical position allowing the top air vents to release the heated air in the most effective manner. The enclosures should be sealed and free from dust and dirt. Do not install the heaters on wood, cardboard or other flammable panels. Heat sensitive components should not be placed near the heat discharge area. For larger enclosures, two or more heaters may be used. The cost of shipping indicated in the listing applies to Canada and the continental United States only. Please contact us for a shipping estimate to any other countries. If you have any urgent or special shipping requests, please contact us before your purchase to see if we can accommodate them. We shipped via tracked services only and within our indicated timelines. Notes left in the message section of an order are not sent directly to us and may or may not be seen. Always message us directly and we will do our best to help. Customers are responsible for all Customs fees, import taxes, VAT, duties, clearance fees and other fees applied by their respective countries. Please see eBay’s guidelines for returns. In the event of a return, duty and shipping charges will be borne/paid by the buyer. Always put the correct value and indicate that your shipment is a return. We are not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. While many products will have firmware already installed, we make no representation as to whether a product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. We also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from its distributors, or any other source. We also makes no representations as to your right to install any such firmware on the product. We will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.

Price: 300 USD

Location: LACOMBE

End Time: 2025-02-06T01:06:56.000Z

Shipping Cost: 0 USD