NEW Linshang LS110 Split Transmission Meter Dual Mode 550nm Transmittance Tester

Description: NEW Linshang LS110 Split Transmission Meter Dual Mode 550nm Transmittance Tester Detail LS110 is used for the transmittance testing of glass, plated film, organic materials, solar film and other translucent materials such as insulating glass, filmed glass, PMMA materials etc.LS110 consist of two parts: main part for measuring and displaying functions ; the auxiliary part for light source and laser light for alignment. Parameters: 1. Dimension: 140mm x 82mm x 92mm (length x width x height) 2. Weight: 630g 3. Resolution: 0.1% for measured value<10% and 1% for other ranges 4. Accuracy: better than +/-2% (Colorless and transparent material) 5. Test sample size: > 40*40mm 6. VL Peak wavelength: 550nm 7. Power supply: built-in lithium rechargeable battery 8. “Charge”refers to the charge indicator. The red LED light is on when charging the meter and the light is off when the charging is completed 9. “Battery”is the on-off indicator. The green LED is on when starting up the meter and the light flashes when the battery is running out and requiring timely charging Features: 1. Two-parts dual mode of the main and auxiliary part facilitates the transmittance measurement of the automobile front windshield glass and building glass. 2. The built-in lithium rechargeable battery is easy for use without replacing the battery; 3. Use the USB port of computer to charge the meter via the built-in charger; 4. The laser alignment function guarantees the accurate alignment of the main part with the auxiliary part in the process of measurement and ensures accurate measurement. 5. Three light Transmittance Meter in one device; result is the average of three values 6. Two laser for two part alignment, more accuracy. I. LS110 Light Transmittance Meter Introduction Linshang LS110 wireless split type light transmittance meter is mainly used for light transmittance detection of transparent materials such as glass, acrylic and film. This car window tint light transmittance meter has three independent test units. The displayed visible light transmittance is the average of three measurement data. The instrument use a visible light source to illuminate the tested transparent materials. The sensor detects the incident light intensity of the light source and the light intensity after passing through the tested transparent materials, expressed as a percentage. II. LS110 Light Transmittance Meter Application The LS110 portable light transmittance tester uses a split design. It consists of two parts: the main part (PART I) and the auxiliary part (PART Ⅱ). The main and auxiliary parts have super strong magnetic force and can be automatically closed together. It is widely used in the transmittance test of installed materials such as automobile front shield and curtain wall glass. III. LS110 Light Transmittance Meter Parameters Spectral range 380nm-760nm full wavelength, in line with CIE photopic luminosity function Measurement accuracy better than ± 2% (colorless and uniform transparent materials) Resolution When the measured value is the resolution is 0.1%; for other ranges,the resolution is 1% Test samplesize bigger than 40mm × 40mm Power supply Built-in lithium rechargeable battery(Battery Not Include) Dimension 140mm x 82mm x 92mm (L*W*H) Weight 630 g IV. LS110 Light Transmittance Meter Characteristics 1. The split design of the main and auxiliary machines is convenient for on-site measurement, such as the transmittance measurement of the car front windshield and the building glass. 2. It adopts three-way visible light source measurement. The displayed light transmittance is the average value of three-way measurement data. The measurement result has strong anti-interference ability. 3. The car window tint visible light transmittance meter has built-in rechargeable lithium battery. There is no need to replace the battery, the standard one-to-two USB charging cable can be used to charge the main and auxiliary machines at the same time. The instrument is easy to use and environmental protection. 4. The laser alignment function ensures that the main and auxiliary machines are accurately aligned during the measurement process, thereby ensuring the accuracy of the measurement. 5. With test data lock function (HOLD), the light transmittance meter is convenient for data reading. The data remain on the interface after taking away the test materials. Notice: Because,the international air shipping forbid to ship liquid,powder and batteries, If you purchased goods containing such items, we will not be putting them packing. Thank you for your support. payment Payment must be made within 12 days after the auction/bid ends, or eBay will open Unpaid Item case automatically later. Shipping Please read this before buying International Shipping may Be Delayed Due to Customs. Customers are Responsible For All Import Charges, Tariffs, Duties, Taxes, and Fees Associated with Import of the product. Shipping Charges does not include any Import Charges, Tariffs, Duties, Taxes, and Fees Associated with it. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address. About US We are professional EBAY sales team and lots of ebay buyers very satisfied with our services.You can enjoy top-quality product and high-quality services from us, Trust me that you will have a pleasant shopping experience in here. Please ensure your mail box would not blocked / filtered our mails, All the mail will be replied within 24 hours.

Price: 365 USD

Location: United States

End Time: 2024-12-07T11:10:50.000Z

Shipping Cost: 0 USD