NEW Shoei X-15 Marquez Motegi4 Helmet

Description: NEW Shoei X-15 Marquez Motegi4 Helmet Shoei developed the X-15 with technologies born from racing with one mission in mind, to make the fastest riders on the planet even faster. By designing and refining the X-15 helmet in their state-of-the-art wind tunnel facility, Shoei was able to reduce drag by 6.1% and lift by 1.6% compared to it's predecessor the X-14. The X-15 features a Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell, a six-ply matrix of fiberglass with lightweight organic and high-performance fibers to provide optimal impact-absorption, strength and elasticity. Packed in the X-15's shell is a multitude of features fit for a pro and ready to boost your performance, safety and comfort. Aerodynamic Shell DesignDesigned and refined in Shoei’s state-of-the-art wind tunnel facility6.1% reduction in drag and a 1.6% reduction in lift compared to the X-14Over 150+ profile shape iterations enhance high-speed stability and reduce negative forcesRear stabilizer system, concave of the shell surface and pronounced edges on the top left and right sides of the helmet enhance aerodynamic performanceMulti-Ply Advanced Integrated Matrix Plus (AIM+) ShellSix-ply matrix of fiberglass with lightweight organic and high-performance fibers provide optimal impact-absorption, strength and elasticityFour shell sizesMulti-Piece Multi-Density EPS LinerOptimized impact absorption thanks to varying densities of foam in key areasPrecise placement of multi-density EPS liner material yields a more compact, lightweight designStrategically-located tunnels allow cooling air to travel unrestricted through the helmetSmall channel in the front chin bar area strategically designed to guide and receive hydration systems (including the optional Shoei Hydration tube – sold separately)Ventilation SystemSeven (7) closable air intakes and six (6) exhaust outletsAir intakes are strategically shaped and located to maximize airflow and negative air pressure suction to the rear of the helmetVentilation tunnels in EPS liner enlarged to 10mm deep from 6mm in the previous model for superior ventilationInnovative cheek pad cooling system by increasing the number of holes delivering refreshing air to the rider’s cheek areaField of VisionRevised eyeport trajectory from previous model increases the upper field of view by 5mmDKS-304 PINLOCK EVO lens system is 10% larger than its predecessor and improves lateral field of vision thanks to relocated pins outside of the eyeportCWR-F2R Shield & Base Plate SystemDistortion-free view thanks to Shoei’s innovative 3D injection-molding processProtects against 99% of the sun’s damaging UV raysCWR-F2R 2D “flat” outside surface combined with 3D technology inside offers an aggressive look with optimized visibilityVortex Generators on the sides of the shield improve aerodynamics and reduce wind noiseCenter locking mechanism helps to evenly distribute shield forces across both spring-loaded base platesExclusive two-stage shield locking system - center locking mechanism plus racing shield lockTrigger lock mechanism prevents the shield from detaching during an impact or crash3D Max-Dry Custom Interior System II3D Max-Dry Custom Interior System II is fully removable, washable, adjustable and replaceableMax-Dry liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiorsIndependently adjustable 3D center pad components can be replaced with optional thicknesses to customize the fitEach pocket-shaped pad has separate, removable layers that can be peeled away to further optimize the individual fitPatented angle adjustment mechanism allows you to change the position of the helmet by up to 4-degrees to increase the upper field of vision while tucked in extreme racing positionsSurface area of the cheek pads has been enlarged by 16.5% from X-14 for a more secure and comfortable fitEmergency Quick Release System (E.Q.R.S.)Emergency Quick Release System that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmetSafety CertificationsSnell M2020R certifiedECE-22.06 certifiedDOT certified NEW Shoei X-15 Marquez Motegi4 Helmet Shoei developed the X-15 with technologies born from racing with one mission in mind, to make the fastest riders on the planet even faster. By designing and refining the X-15 helmet in their state-of-the-art wind tunnel facility, Shoei was able to reduce drag by 6.1% and lift by 1.6% compared to it's predecessor the X-14. The X-15 features a Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell, a six-ply matrix of fiberglass with lightweight organic and high-performance fibers to provide optimal impact-absorption, strength and elasticity. Packed in the X-15's shell is a multitude of features fit for a pro and ready to boost your performance, safety and comfort. Aerodynamic Shell Design Designed and refined in Shoei’s state-of-the-art wind tunnel facility 6.1% reduction in drag and a 1.6% reduction in lift compared to the X-14 Over 150+ profile shape iterations enhance high-speed stability and reduce negative forces Rear stabilizer system, concave of the shell surface and pronounced edges on the top left and right sides of the helmet enhance aerodynamic performance Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell Six-ply matrix of fiberglass with lightweight organic and high-performance fibers provide optimal impact-absorption, strength and elasticity Four shell sizes Multi-Piece Multi-Density EPS Liner Optimized impact absorption thanks to varying densities of foam in key areas Precise placement of multi-density EPS liner material yields a more compact, lightweight design Strategically-located tunnels allow cooling air to travel unrestricted through the helmet Small channel in the front chin bar area strategically designed to guide and receive hydration systems (including the optional Shoei Hydration tube – sold separately) Ventilation System Seven (7) closable air intakes and six (6) exhaust outlets Air intakes are strategically shaped and located to maximize airflow and negative air pressure suction to the rear of the helmet Ventilation tunnels in EPS liner enlarged to 10mm deep from 6mm in the previous model for superior ventilation Innovative cheek pad cooling system by increasing the number of holes delivering refreshing air to the rider’s cheek area Field of Vision Revised eyeport trajectory from previous model increases the upper field of view by 5mm DKS-304 PINLOCK EVO lens system is 10% larger than its predecessor and improves lateral field of vision thanks to relocated pins outside of the eyeport CWR-F2R Shield & Base Plate System Distortion-free view thanks to Shoei’s innovative 3D injection-molding process Protects against 99% of the sun’s damaging UV rays CWR-F2R 2D “flat” outside surface combined with 3D technology inside offers an aggressive look with optimized visibility Vortex Generators on the sides of the shield improve aerodynamics and reduce wind noise Center locking mechanism helps to evenly distribute shield forces across both spring-loaded base plates Exclusive two-stage shield locking system - center locking mechanism plus racing shield lock Trigger lock mechanism prevents the shield from detaching during an impact or crash 3D Max-Dry Custom Interior System II 3D Max-Dry Custom Interior System II is fully removable, washable, adjustable and replaceable Max-Dry liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors Independently adjustable 3D center pad components can be replaced with optional thicknesses to customize the fit Each pocket-shaped pad has separate, removable layers that can be peeled away to further optimize the individual fit Patented angle adjustment mechanism allows you to change the position of the helmet by up to 4-degrees to increase the upper field of vision while tucked in extreme racing positions Surface area of the cheek pads has been enlarged by 16.5% from X-14 for a more secure and comfortable fit Emergency Quick Release System (E.Q.R.S.) Emergency Quick Release System that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet Safety Certifications Snell M2020R certified ECE-22.06 certified DOT certified × × × × × Shipping info Click the Shipping & Payments tab above the listing description for more info FREE Shipping Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © Ducati Bros Shipping & Payments Shipping is FREE for this item Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 989.99 USD

Location: Sanford, Florida

End Time: 2024-12-01T18:46:20.000Z

Shipping Cost: 0 USD