OB D Series B Series D2 Tucked Engine Harness Civic Si Type R CRX EM1 99-00 EK

Description: All connectors and materials are new. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. Our engine harnesses are 100% quality tested pin to pin; And resistance checked to ensure no voltage fluctuations. We sell the back-side (vehicle specific sub harness) harness separately. Please contact us if you need assistance finding the correct sub-harness. -All engine harnesses are made with OBD1 (92-95) ECU Connectors. -An ECU adapter must be used for OBD2a or OBD2b ECU's if necessary. -Our harness does not support USDM OBD2 ECU's. Aftermarket ECU's using OBD2 plugs & Non-US OBD2 ECUs are compatible! (except for H22 and GSR stock computers). These harnesses are guaranteed to work, however they are non-refundable. Because the back-side (interior/shock tower connection) separates from the main harness, the engine harness can be used on multiple chassis provided the engine itself uses the same components. We sell the back-side harness separately. HARNESS CONNECTOR LIST: • Oil Pressure Sending Unit • Knock Sensor • Intake Air Temperature (Intake Manifold Style) • Oxygen Sensor (Primary 4 Wire) • OBD2 Alternator Plug type • 2 Extra Wires • OBD2 Injectors 1-4 • MAP Sensor • TPS (Throttle position) • Idle Control Motor • Electronic Speed Sensor • Ground • Fan Switch • OBD2 10-pin Distributor plug • H20 Sending Unit (for Gauge Cluster) • Reverse Lights • Engine Coolant Temp • Starter Signal • VTEC Solenoid • OBD1 ECU Plugs A,B,D • Power Distribution Cap

Price: 319.95 USD

Location: Salinas, California

End Time: 2024-09-19T00:01:37.000Z

Shipping Cost: 0 USD