Paver Sealer & Water Repellent Premium Grade

Description: Paver Sealer & Water Repellent Premium Grade Rainguard Paver Sealer To Extend the Life of Your Pavers Premium Grade Paver Sealer can help protect, restore and extend the life of your pavers with a clear finish silane siloxane water repellent coating. Designed specifically for paver surfaces, Paver Sealer is made from the best water repellent chemicals in the construction market It is formulated by blending silanes and siloxanes that have long been trusted by architects, engineers and building owners around the globe. What makes Paver Sealer different? A proprietary ingredient called Micro-Lok™. This additive ensures a long lasting mechanical bond and creates a hydrophobic barrier that is not affected by weathering, salt, dirt, freezing temperatures, UV light and wind-driven rain. Available in a ready-to-use 16 oz spray, 1 gallon and 5 gallon container and money saving concentrates with your choice of a 1 quart concentrate which makes 2 gallons and a 1 quart concentrate which makes 5 gallons of ready-to-use product. Fast, easy clean up. Simply use soap and water directly after application is completed. Be sure to clean any overspray on glass and decorative metals. Where is Paver Sealer used? Homeowner Projects: Pavers wherever they are used - walkways, patios, drivewway Why Paver Sealer? Penetrates deep creates a tough, durable clear finish Does Not Change Look of Surface Excellent mold and mildew inhibitor Stain resistant to oil, gas and anti-freeze Install down to 40°F (4.4°C) Does not alter surface appearance & UV resistant - will not yellow Overspray during application will not harm glass or other building surfaces 100% vapor permeable - will not trap moisture TECHNICAL INFORMATION Color Clear Sheen/Gloss Level No change in visual appearance Dry To Re-Coat 60 Minutes #Coats Recommended 2 coats Back in-service time 1 hours Application method Low pressure hand pump or airless sprayer Where Can it be Used All Interior|Exterior unpainted paver surfaces Apply to New Concrete 10 days Low Application Temperature 40F|10C Surface & Air Base Water VOC Content <15 g/L Use on Material Pavers Warranty Available Up to 5 year satisfaction guarantee COVERAGE RATE SQUARE FEET/GALLON Paver walkway 125 – 150 Paver driveway 125 – 150 Paver planter 100 – 125 APPLICATION INSTRUCTIONS CONDITIONS PRIOR TO APPLICATION Temperature (surface|air) 40F to 90F (4.4C to 35C) and at least 5F above dew point Moisture of substrate Less than 15% Humidity Less than 90% Rain No rain 48 hrs prior to, 12 hrs after application Cure time for newly poured concrete 2 days Application method Use low pressure hand pump or garden sprayer WORKING WITH CONCENTRATES PART # SIZE MAKES INSTRUCTIONS SP-3002 32 oz 2 Gal Empty 32 oz into 1 gal container, fill with water, stir (7 parts water to 1 part Brick Sealer) SP-3003 32 oz 5 Gal Empty 32 oz into 5 gal container, fill with water, stir (19 part water to 1 part Brick Sealer) FOLLOW THESE SIMPLE APPLICATION STEPS Clean and Prep: Before pressure washing apply and brush out stains using Cleaner/Prep manufactured by Rainguard and available here on our website. Ensure the surface is clean and “bone dry”, thus allowing the sealer to absorb into the surface. Application: For a proper application, use a hand pumped garden sprayer. Apply 1 (one) heavy saturation coat to ensure the product can penetrate deep into the surface, sealing the pores or capillaries. Once the 1st coat is dry to the touch apply the recommended 2nd saturation coat to ensure best results. Once the 2nd coat is completely dry you can now put any decor, furniture etc. back on the treated surface. IMPORTANT: Avoid letting any water to come in contact with your newly sealed surface for 24 hours. After full cure time is achieved (approximately 4-5 days) you can expect the full beading effect. Wait to test water repellency after the full chemical cure period. To conduct a test, simply drip some water in a few places where you have sealed the surface, if the drips make the surface darken, this is an indication that it is still absorbing, meaning you need to apply another coating. (more common with older surfaces) Vertical Surfaces: Allow product to drip heavily before moving onto the next spot. Heavily saturate the surface maintaining at least a 6-inch drip or run down. Horizontal Surfaces: Apply the product until it starts to pool up slightly. You will know enough was applied in any given spot when the product starts to pool (puddle) up with a milky-white color. The puddling will dissipate slowly into the pores so there is no need to back roll or brush them out. Clean-Up: Clean-up is a breeze thanks to our water based formula. Simply rinse out equipment with fresh water after application until it runs clear. Any undesired over-spray on windows or glass can be immediately wiped off. If the product has already dried it can be cleaned off quickly with a rag, warm water, and a mild soap. PRECAUTIONS & LIMITATIONS 1. All surfaces to be coated should be clean of any dirt and grime, efflorescence, lime run, form oils and release agents, grease, mud, excess mortar, and mold and mildew, etc. 2. All cracks should be pointed or caulked. All voids, bee holes, masonry surface defects and openings such as conduits, pipes, drains, door frames, vents, air conditioner openings, electrical openings, control joints, or any dissimilar materials should be repaired using urethane or other approved patching. STORAGE Store materials in a well-protected area between 45° and 90°F. Avoid freezing temperatures, direct sunlight, and moisture. Keep away from heat sources. Size Price Ready-to-Use 5 Gallons 317.40 Ready-to-Use 1 Gallon 85.10 Concentrate Makes 5 Gallons 173.65 Concentrate Makes 2 Gallons 77.05 16 oz Spray Bottle 34.50 Shipping Shipping cost:No cost shipping lower 48 US States FedEx Ground Delivery time:Typically 3-5 days to process order plus 1 to 5 days transit time after shipment depending on location Payment We accept the following payment methods: PayPal payment due at time of order placement Please contact us if you have any questions. Service PLEASE CONTACT CUSTOMER SERVICE FOR QUESTIONS

Price: 34.5 USD

Location: Costa Mesa, California

End Time: 2024-04-17T23:55:19.000Z

Shipping Cost: 0 USD