Description: Category 500 Series Modular Synth Keyboards Microphones Preamps Dynamics Equalizers Monitoring Computer Audio Interfaces Software Beat Production Pete's Place Audio BAC-500 Designed by Brad Avenson of Austin, Texas-based Avenson Audio, the Pete's Place Audio BAC (short for Brad Avenson Compressor) is a feedback-style FET compressor built around two discrete op amps and a custom wound output transformer.Features: A three-position sidechain contour switch Eight-LED gain reduction meter Pushbutton for distortion Pushbutton for bypass The ratio control features five positions ranging from 2:1 to 20:1, with a sixth position marked as 4 The BAC’s sidechain toggle switch offers a choice of three possible settings: flat, high-pass filter (cut off around 70 to 100 Hz) BAC is capable of delivering nearly 50 dB of gain From the top down, the BAC’s faceplate features a large silver rotary input knob, smaller pots for attack, release and ratio, and a large output knob at the bottom. Additional features include a three-position sidechain contour switch, eight-LED gain reduction meter, and pushbuttons for distortion and bypass.The module’s attack control runs from fast to quite fast, while the release control exhibits a fairly wide range, enabling the compressor to go from “pumping, breathing fast” up to approximately a second and a half. This allows sounds to “hang” a bit when using the device purely as a leveler or limiter.The ratio control features five positions ranging from 2:1 to 20:1, with a sixth position marked as “∞!”. According to Avenson, “The infinity control has a little exclamation point next to it because, not only is it really flat, but it also puts you in that spot where you can do some over-compression and other interesting things. It changes where the threshold starts to compress as well, so it gives you different varieties of tonal characteristics to play with.”The BAC’s sidechain toggle switch offers a choice of three possible settings: flat, high-pass filter (cut off around 70 to 100 Hz), and an option that somewhat exaggerates the high end while simultaneously cutting the low end. “The overall effect of this third setting is somewhat like a de-esser fed into the sidechain, but it’s a little wider than that and quite good for taming a variety of things that are overly bright,” Avenson notes.With all of the controls essentially cranked between the input and output knobs, the BAC is capable of delivering nearly 50 dB of gain, which can be very helpful in compensating for serious gain reduction issues caused by greatly compressing dynamic range.The bypass button found below the output knob is a true relay bypass, while the adjacent distortion button allows the user to achieve a true bench FET compression sound. “A lot of FET compressors use tricks to linearize the FET as a compression element and make it sound cleaner because if they’re used solely by themselves, they’re really pretty raunchy sounding,” says the designer. “So this switch allows you to play with how much of the frequency response and distortion characteristics of the FET you get. By engaging it, you’re getting a lot more second harmonic distortion and aggressive sounds because we’re taking away some of the linearizing elements. It’s basically a way to kick in a more aggressive sounding compressor without changing any of the other settings. You can dial in the amount of dirt you want.”Avenson sums the BAC up by adding, “Although this product is largely designed to provide a bit of color and flavor—and not be too heavy handed—it really does possess that nice ‘bite’ that is characteristic of FET compressors and perfect for cranking down on things like drum room mics when you need it.”Pete’s Place Audio is an umbrella organization founded to bring a wide variety of handcrafted, innovative, boutique recording and live audio products to market. Under the leadership of President Lisa Montessi and backed by the manufacturing expertise of A-Designs Audio, Pete’s Place collaborates with some of today’s most talented recording artists and engineers to help determine what products, regardless of how esoteric, they feel are missing in the studio and live performance environments. About Us Since 1993, we have been committed to equipping our customers with the very best gear, advice, and personal service anywhere. We believe that great sound can be achieved at any budget. We also believe that the ambitions of our customers should always come first. For us, it's about building long-lasting relationships, not just selling gear. And over the years, those beliefs have turned customers into friends and family. Whether you're just starting out, or a seasoned pro, we're here for you, no matter where your audio travels may take you. Shipping Policy Free ground shipping to the lower 48 states Via FedEx. All of our items ship via FedEx. On checkout, it may look like you are selecting a UPS shipping method, but the item will be shipped via the equivalent FedEx method. Import Duties and Tax Since import taxes and/or duties that your government might impose on products shipped from the United States may apply, you (the customer), are solely responsible for shipping charges, taxes, and duties, once goods arrive in your country. Undeliverable/Rejected Package If your package was rejected by your local Customs Bureau or the shipment could not be delivered and was returned to Vintage King Audio for any reason, we are not responsible for the shipping costs. Free Extended Warranty All new items that Vintage King carries are subject to our FREE extended warranty protection. Basically, if the manufacturer offers a 1-year warranty on your product, then you are covered under the same warranty terms for a total of 2 years from the time of initial shipment. Likewise, if the manufacturer offers a 5-year warranty, then you receive a total of 6 years of coverage when purchased through Vintage King. We add 1 year to your standard manufacturer's warranty period, FREE of charge, whatever the manufacturer's warranty period may be. Duties and tax for warranty and damage replacement items International Duties and tax for warranty and damage replacement items may apply. Even though you may have paid shipping, taxes or duty on your original order, it is IMPORTANT to understand that your government may impose duties and taxes for warranty items or replacement items damaged during shipment from the United States for the new order. You (the customer), are solely responsible for shipping charges, taxes, and duties, once goods arrive in your country. Used Item Warranties Vintage King offers an industry-leading level of technical service and warranty support on our used and vintage items. Our used item warranty periods are as follows: Analog Outboard Gear 1 Year Microphones 1 Year (excluding capsules, tubes, and ribbon elements) Speakers 1 Year (excluding drivers) Digital Outboard Gear 30 Days Return Policy We do our best to help you choose the perfect gear, but if you don't love it in the first 30 days after receipt, please contact us through eBay for a return authorization. Note: Software is not returnable or refundable. What Are "Demo Deal" or "B-Stock" Products? Our Demo Deals and B-Stock products offer a unique opportunity to save big on near-mint condition, fully warrantied gear. These items have been opened for demonstration purposes and put back in the box without extended use. All original factory accessories and packaging are included. In addition to the manufacturer's warranty, Demo Deal and B-Stock items also come with an additional 1-year of warranty coverage from Vintage King, free of charge, so rest assured that not only are you saving big by purchasing a Demo Deal/B-Stock item, but you will also receive the same level of world-class support from Vintage King as with the purchase of a factory-sealed unit. Taxes Vintage King collects sales tax for shipments to Alabama, Arkansas, Arizona, California, Colorado, Connecticut, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, Nevada, New Jersey, New Mexico, New York, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Utah, Vermont, Virginia, Washington, Washington D.C., Wisconsin and Wyoming. Partial and complete tax exemptions may be available in your state. Contact us through eBay for details. Note: eBay may collect sales tax in states not listed above.
Price: 809 USD
Location: Ferndale, Michigan
End Time: 2025-01-24T17:00:39.000Z
Shipping Cost: 10 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
MPN Value DEFAULT:Does Not: BAC-500 Comp
Brand List: Pete's Place Audio
Type: Dynamic Range Processor
Brand: Pete's Place Audio
MPN: BAC-500 Comp
UPC: Does Not Apply
