PiBot FluidNC ESP32 GRBL CNC Controller V4.9 Plus

Description: What is itThis was designed to control a wide variety of CNC machines. It can control 6 motors and many spindle and laser types. It is very easy to configure. You never have to compile any software. All configuration, upgrading, etc can be done via web browser.Designed for FluidNC ESP32 GRBL CNC.electronic box needs to be purchased separately.more detail: https://www.pibot.com/pibot-fluidnc-grbl-cnc-controller-v4-9Compatible with the official original firmware, we provide yaml configuration file. FeatureIntegrated ESP32 (Programmed with FluidNC. Includes a generic configuration)(6) Motor connectors for external stepper drivers (5v signals). Each motor has separate step, direction and enable signals. Inputs for switches (limits, probes, control, etc)Communication Mode: USB Cable or Blue Tooth or WIFISpindles (many types supported). Some multi-spindle arrangements are possible like RS485 & laser on the same machine.0-10V controlled spindles with additional forward and reverse direction signalsPWM Speed controllers with optional separate enable signalsRelay (on/off) controlled spindles.BESC (Brushless Motor) based spindlesLasers with PWM and enableUnused spindle 5V outputs can be used for any output function (coolant, etc)Micro SD card socket for local storage of gcode filesModule socket for GPIO extenders and Pendant interfaces.Compatible with PiBot Stepper Motor Driver Rev2.3 TOSHIBA TB6600 (3.3V 5V or Dgnd logic max Output 4.12 - 4.5A)Compatible with PiBot Isolated Relay Board Rev2.3 the feature compare to the V4.81. To make it compatible with a 150 * 90 * 40mm box. ( it needs to be purchased separately)2. Change the output connector to a screw method. (use the jumper opinion then can choose output model for extra driver or to motors via the capnut on or off)3. Change the antenna to an external or internal one that can be selected through resistors.4. The main power supply and stepper motor power supply are input separately.5. use the plug then can change the output for drivers or motors.6. change the cp2102 chip supplies.7. Improved machining accuracy. How it worksVideo Toturialshttps://youtu.be/IuNjBdTq1Fs https://youtu.be/sXs8gGfCyaw https://youtu.be/RVehtzwMaMI

Price: 59.99 USD

Location: BeiHai,GuangXi

End Time: 2025-01-12T02:21:12.000Z

Shipping Cost: 6.99 USD