Description: The RDL HD-RA35U 35 Watt Remote Mixer Amplifier is a versatile audio amplifier, mixer and paging system targeted for background music, call on-hold music, and commercial audio applications. The amplifier features two zones with Zone 1 delivering 35 watts and support for balanced and unbalanced inputs, and audio output to 4 and 8 ohm speakers. Zone 2 is reserved for an 8 ohm speaker or 600 ohm telephone equipment, and capable of 4 watts.Optional VCA remote controls provide remote volume adjustment at various remote locations. The unit is built to high energy efficiency standards with automatic power up when signal is present, and a threshold adjustable "sleep mode" that powers down the amplifier when there is no audio signal. The HD-RA35U prioritizes paging audio with adjustable muting and ducking functions that lower or interrupt background music during pages. The amplifier is more than ideally suited for commercial retail, offices, warehouses, restaurants, bars, and various other environments that require a versatile and efficient audio paging amplifier.Four audio inputsPaging input with front-panel volume controlThree inputs with VCA volume control adjusted using RDL remote controlBass and Treble tone controlsDesigned for background music with paging and music-on-holdManual or automatic (VOX) priority duckingBalanced inputs and amplified outputs on detachable terminal blocksUnbalanced inputs and outputs on RCA jacksIncludes power supplyAutomatic sleep mode meets strictest energy saving standardsAdditional Input FeaturesInput 1 is switch-selectable MIC or LINE. Phantom voltage (IEC standard 24VDC) is switch-selectable for the microphone input. The line input is transformer isolated and accepts balanced or unbalanced, high or low impedance audio sources. A gain trimmer is provided to set the input preamplifier to the optimum gain for the installation.A paging source is normally connected to Input 1. This input is equipped with push-to-talk terminals and with an adjustable threshold VOX circuit with LED threshold indicator, either (or both) of which may be set to duck ("fade down" or "mute") inputs 2, 3 and/or 4 by 25 dB when a paging signal is active on Input 1. The attenuated inputs fade up to normal volume when the paging message is finished. A rear-panel trimmer allows the start of the fade-up to be delayed from 2 to 6 seconds.Input 2 is switch-selectable MIC or LINE. Phantom voltage (IEC standard 24VDC) is switch-selectable for the microphone input. The line input is active balanced and accepts balanced or unbalanced, high or low impedance sources. A gain trimmer is provided to set the input preamplifier to the optimum gain for the installation.An RDL Dual-LED VU meter is provided on the rear panel to indicate proper gain adjustment for Inputs 1 and 2. Correct input gain adjustment insures adequate mixer stage headroom.Inputs 3 and 4 each provide unbalanced stereo RCA input jacks, summed to mono.The RDL D-RC3 Audio Mixing Remote Control is a single-gang wall or panel mountable, 3-channel mixing control unit for RDL mixers and PA amplifiers with an RJ45 connection. The D-RC3 simply features 3 volume control dials for remote level control over a remotely locates VCA mixer, set of PA amplifiers, etc.
Price: 99 USD
Location: Houston, Texas
End Time: 2024-11-11T18:42:56.000Z
Shipping Cost: 12.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Features: Design
Brand: Radio Design Labs (RDL)
Type: Not Available
Model: Not Available
Connectivity: Not Available
MPN: HD-RA35UA
RMS Power: 35 W
Impedance: 4 Ohms
Item Weight: 10.0000
