RCDM Roof Rack For The Axial SCX10 II 2017 JK Jeep Wrangler Unlimited CRC RTR

Description: NOTE: THIS IS A CUSTOM MADE-TO-ORDER ITEM OF WHICH IS NOT IN STOCK. WE RESERVE 5 BUSINESS DAYS TO PRINT, ASSEMBLE AND SHIP THIS RACK FROM THE DATE OF PURCHASE. THANK YOU... Hello Folks! I am offering up an RCDM (RC Don Manufacturing) custom made 3D printed roll cage / roof rack for the Axial SCX10 II 2017 JK Jeep Wrangler Unlimited CRC edition RTR rock crawler body. I designed this roll cage to protect my Jeep JK body and give the body a custom scale appearance that is like no other. This roll cage does a great job of protecting the top and windshield areas of the Axial JK (Wrangler) body from being scratched upon roll over. It also provides a great mounting location for an LED light bar (LIGHT BAR NOT INCLUDED) which is protected by a thick plastic "visor" with the RCDM logo on it. Note: This rack is custom made for the Axial SCX10 II 2017 JK Jeep Wrangler Unlimited CRC body and isNOT guaranteed to fit any other body make or style. This rack DOES NOT fit the new SCX10 III JLU Wrangler Body.This roll cage was custom made for the Axial 2017 JK Jeep Wrangler Unlimited CRC edition body that is part of the ready-to-run SCX10 II rock crawler (cat #AX90060). This rack system bolts up directly to the vacuum formed Lexan body and is held in place with ten M2.6 screws and blind nuts that are included in this kit (drilling required). This roll cage will accommodate most 6" light bars (up to 162mm wide) and is shown in the pictures with the Axial Universal Light Bar Set (cat #AX31152). This kit includes a pair of plastic spacers to hold the 160mm Axial universal light bar (LIGHT BAR NOT INCLUDED) however you may use any light bar that fits into the 162mm wide opening.Note: Custom hardware and spacers may be needed when using a light bar other than the 6" Axial universal light bar kit which is not included with this rack. The installer may need to fabricate these spacers or use L-brackets and screws to attach the light bar to the visor.Get your RCDM scale JK roll cage/roof rack to protect your RC investment and improve scale appearance !!!Each roll cage takes us 12 hours to print and is assembled and inspected by hand!Note: This kit requires drilling ten 7/64" holes in the Wrangler body which can be done easily using the roll cage as a layout tool. First assemble the roll cage sides and light bar visor with the included M2.6 x 8mm (X22) and M2.6 x 6mm (X4) screws There are four lengths of M2.6 screws provided with this kit so be careful to pay attention to where the screws are temporarily threaded into the cage so they can be re-installed correctly. Next, place the roll cage where you want it on the body and carefully drill right through the mounting holes of the roll cage into the Lexan body with a 7/64" drill bit. Start with the top four holes (after you have aligned the roll cage) and then install the four M2.6 x 10mm screws into the plastic blind nuts to secure the roll cage for the next set of holes. Now you can drill the six outer support bars into the body (making sure they stay how you want them) and install the M2.6 x 12mm screws and blind nuts. Now you are ready to hit the trail with a custom look that fits the Wrangler perfectly !!!This auction is for 1 black 3D printed ABS plastic roll cage assembly (six bolt together pieces - see picture), 22 - M2.6 x 8mm hex socket button head screws, 4 - M2.6 x 6mm butto head screws, 4 - M2.6 x 10mm button head screws, 6 - M2.6 x 12mm button head screws, , 10 - plastic blind nuts and two plastic light bar spacers (RC rock crawler vehicle, Lexan body and LED light bar in pictures is not included). This rack weighs 112 grams with hardware. This kit will require a 1.5mm Allen wrench to assemble as well as a 7/64" drill bit to install the rack on the polycarbonate body shell (not included). All of my 3D printed parts are made right here in the USA on American Made FDM type printer machines. Buy with confidence as I stand behind what I offer and will do my best to handle any issues my buyers may have.If you should break any RCDM printed parts on the trail rest assured we can get you the spare parts to fix any assembly we sell. Send us a message with a picture of the broken part (if possible) and we will take care of you, no worries ;0)Note: Raw FDM printed parts have a rough finish due to the manufacturing process. Please look carefully at the pictures I have included in this auction before bidding. ABS, PLA and PETG plastic printed parts are NOT UNBREAKABLE and WILL FAIL if pushed beyond their mechanical ability. RCDM parts are not made for "bashing" but for practical scale appearance and protection. We will stand behind our workmanship but cannot assume liability for these products if used in an irresponsible manner.We DO NOT ship outside of the 50 United States due to current international buyer scams so please do not ask for an international shipping quote. International buyers are welcome to use a freight forwarding service but do so at their own risk.Combined shipping available when you use the cart before checkout !!! Click here to check out more quality RCDM products today!!! Thank you for supporting American business and thanks for considering RCDM products!!!

Price: 38.95 USD

Location: Murfreesboro, Tennessee

End Time: 2024-08-14T23:06:19.000Z

Shipping Cost: 4.5 USD