Description: Fast Delivery Lifetime Warranty 30 Day Money Back Guarantee REL 3 Wire Sub Speaker Cable. Neutrik Speakon. Subwoofer Lead For international deliveries please contact us before purchasing longer length leads (10m+) as the shipping prices may vary. This includes Channel Islands, Northern Ireland, Isle of Wight and Scottish Highlands. Item Description Tech Specs Item Description A High Quality upgrade cable for 'REL' subwoofers manufactured using Genuine Neutrik Connectors and the world renowned Van Damme speaker cable. Ultra pure copper conductors, cutting edge PVC compounds, smooth signal transmission, toughness and flexibility. Ultra pure copper conductors, cutting edge PVC compounds, smooth signal transmission, toughness and flexibility. A High Quality upgrade cable for 'REL' subwoofers manufactured using Genuine Neutrik Connectors and the world renowned Van Damme speaker cable **WIRING INFO FROM REL** Connecting High-level connection, using the enclosed cable with the Neutrik Speakon connector, is always the first choice. By connecting to the amplifier’s speaker outputs the sonic signature of the entire amplification chain is folded into the signal for the sub, thereby keeping timing and timbre cues consistent. In other words, the signal sent to the REL is the same signal sent to the speakers, allowing for seamless integration. This connection can be made without affecting the performance of the amplifier because the sub’s amplifier input impedance is 100,000 ohms. This scheme also avoids adding any detrimental effects by not interposing any additional electronics into the amplification chain. •The standard high level hook up procedure is: attach the red wire to the amplifier’s right positive speaker output terminal; attach the yellow wire to the amplifier’s left positive speaker output terminal; attach the black wire to which ever of the amplifier’s ground output terminals is convenient; plug the Speakon connector into the sub’s high level input. •For differential amplifiers using one sub, simply use the standard connecting scheme with the exception of connecting ground to chassis ground, not to speaker output ground, and then connecting into the high level input (Hi Input or Unbal Hi Input on Stentor III and Studio III). •For differential amplifiers using two subs for each channel: connect red to positive; yellow to negative; and black to chassis ground; plug the Speakon into the balanced high level input (Bal Hi Input). Low-level connection, RCA inputs (or XLR on some models), is always an option, should high-level connection not be possible, or in a theatre system where both high-level and low-level connection should be used. When connecting to the low level inputs, connect a single RCA cable to the 0dB RCA jack. Additional gain can be achieved by connecting to the +12dB input. If you are connecting two channels of stereo output from a pre-amplifier, simply use a high-quality y-adaptor to sum the two signals together. Positioning The optimal position for a REL is in one of the corners behind the main speakers. This position provides 9 dB of mechanical amplification and allows for the most linear true low bass wave launch, owing to the ability to tune the sub to the axial node of the room, or longest throw distance Tech Specs Featured Categories Signup to receive email newsletters about new items and special promotions! Sign up Add seller to Favourites About Us Shipping Warranty Quality Control Green Policy Returns About Us We are a UK based company specialising in the production of high quality 'custom' cabling for musicians, studios, stage, cinema and broadcast. We manufacture audio, video, data and power cabling using the best components the world has to offer. We employ and train highly skilled staff, many of whom have extensive experience and education in Audio and Electrical technology. We are Electricians, Electronics Engineers, Radio Enthusiasts, Mix Engineers, Live Engineers and some of us are just damn good at soldering! For honest and informed technical advice please do not hesitate to contact us, we love a challenge : ) Shipping Free UK delivery on custom cable orders is a 3-5 day service. Please allow 1-2 days for dispatch and 2-3 days for delivery. In most cases orders will be delivered by Royal Mail 48 Express UK delivery is 'same day dispatch' on orders placed before 12pm, with a 1-2 day delivery estimate. Using Royal Mail First Class, or Next Day Courier for orders of 2kg or more UK Next Day Guarantee is 'same day dispatch' on orders placed before 12pm, and delivered via Next Day Courier International Orders. We ship to most countries in the world. 247 countries are included at checkout, if yours is not please contact us directly for a quot Warranty Lifetime Warranty We offer a lifetime warranty on all our manufactured cables. This warranty covers manufacturing defects and not wear and tear due to general use. For a cost we are happy to replace damaged/worn parts for the lifetime, please contact us for pricing. Return Postage Costs If your cable develops a manufacturing fault within 12 months of the purchase date then we will reimburse return postage costs. After 12 months the costs are paid by the customer. Limits of Responsibility We accept no responsibility for damage to equipment incurred during operation or use of our products where an item has been improperly used. Please contact our Technical Team for advice prior to ordering if you are unsure about your requirements. Our technical advice is insured by a £4million public liability insurance Quality Control All of our manufactured products are electrically tested before dispatch. We pressure test for short circuit, continuity and insulation resistance. Due to the nature and complexity of what we do there was no single tester available on the market to accommodate all of our needs so we decided to build all of our own testing equipment! Our testers go way and beyond what is normally offered, ensuring quality of sound and reliability All AC mains products conform to BS 7671 wiring regulations and are tested by qualified technicians trained to City & Guilds 2377 standards Green Policy We take waste and our impact on the environment very seriously. All of our plastic and cardboard waste is separated and collected on a monthly basis. Empty cable reels are returned to suppliers to be re-used and we even go as far as having a compost bin in our kitchen. We try to keep packaging to a minimum and try to re-use packaging materials where possible, so please do not be upset if your order arrives in a second-hand box! Please keep your bubble wrap for Christmas and re-use boxes where you can. If you wish to return unwanted cable and connectors then please do so, we are happy to recycle them on your behalf Returns You have 30 days to request returns. Items must be unused and coiled neatly for postage. Return shipping costs are the responsibility of the customer. Refunds are credited back within 2 days to the original payment method. We do not accept returns on custom made items where a design has been specified or where items have been ordered in on request. If your parcel arrives with shipping damage, please refuse delivery. If you have already accepted delivery, please contact us straight away. Shop Categories Guitar Cables Balanced Cables Pseudo Balanced Data Cabling (Digital) + CV Stereo Cables Multicore's Speaker Cables Power Cables Tattoo Cables Rudiment eDrum Cables Cable & Connectors Tools & Accessories Cable Brands Signup to receive email newsletters about new items and special promotions! Sign up Add seller to Favourites High-level connection, using the enclosed cable with the Neutrik Speakon connector, is always the first choice. By connecting to the amplifier’s speaker outputs the sonic signature of the entire amplification chain is folded into the signal for the sub, thereby keeping timing and timbre cues consistent. In other words, the signal sent to the REL is the same signal sent to the speakers, allowing for seamless integration. This connection can be made without affecting the performance of the amplifier because the sub’s amplifier input impedance is 100,000 ohms. This scheme also avoids adding any detrimental effects by not interposing any additional electronics into the amplification chain. •For differential amplifiers using two subs for each channel: connect red to positive; yellow to negative
Price: 82.35 USD
Location: Nottingham
End Time: 2023-12-24T15:39:26.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Brand: Van Damme
Country/Region of Manufacture: United Kingdom
Connectors A: Speakon (4-Pole) Female
Type: Single Cable
To Fit Guitar: 1 m, 2 m, 3 m, 5 m, 8 m, 10 m, 15 m, 20 m
Suited For: Speaker/Amplifier
UPC: Does not apply
Available Variations
Color: NL4FX-VDSPBK4250025-BARE.END_REL
Price: 82.35 USD
Available Quantity: 49
Quantity Sold: 8
Color: NL4FX-VDSPBK4250050-BARE.END_REL
Price: 84.26 USD
Available Quantity: 39
Quantity Sold: 2
Color: NL4FX-VDSPBK4250075-BARE.END_REL
Price: 86.14 USD
Available Quantity: 58
Quantity Sold: 1
Color: NL4FX-VDSPBK4250100-BARE.END_REL
Price: 88.03 USD
Available Quantity: 34
Quantity Sold: 1
Color: NL4FX-VDSPBK4250150-BARE.END_REL
Price: 91.79 USD
Available Quantity: 9
Quantity Sold: 5
Color: NL4FX-VDSPBK4250200-BARE.END_REL
Price: 95.57 USD
Available Quantity: 56
Quantity Sold: 19
Color: NL4FX-VDSPBK4250300-BARE.END_REL
Price: 103.13 USD
Available Quantity: 14
Quantity Sold: 14
Color: NL4FX-VDSPBK4250400-BARE.END_REL
Price: 108.04 USD
Available Quantity: 69
Quantity Sold: 12
Color: NL4FX-VDSPBK4250500-BARE.END_REL
Price: 118.24 USD
Available Quantity: 29
Quantity Sold: 7
Color: NL4FX-VDSPBK4250600-BARE.END_REL
Price: 125.79 USD
Available Quantity: 24
Quantity Sold: 5
Color: NL4FX-VDSPBK4250800-BARE.END_REL
Price: 140.9 USD
Available Quantity: 15
Quantity Sold: 2
Color: NL4FX-VDSPBK4251000-BARE.END_REL
Price: 156.01 USD
Available Quantity: 40
Quantity Sold: 2
Color: NL4FX-VDSPBK4251500-BARE.END_REL
Price: 193.76 USD
Available Quantity: 9
Quantity Sold: 2
Color: NL4FX-VDSPBK4252000-BARE.END_REL
Price: 231.53 USD
Available Quantity: 7
Quantity Sold: 2
Color: NL4FX-VDSPBK4252500-BARE.END_REL
Price: 269.3 USD
Available Quantity: 4
Quantity Sold: 0
Color: NL4FX-VDSPBK4253000-BARE.END_REL
Price: 299.01 USD
Available Quantity: 4
Quantity Sold: 1
Color: NL4FX-VDSPBK4254000-BARE.END_REL
Price: 382.59 USD
Available Quantity: 9
Quantity Sold: 0
Color: NL4FX-VDSPBK4255000-BARE.END_REL
Price: 458.12 USD
Available Quantity: 7
Quantity Sold: 0
