Ruckus R710 Dual-band PoE+ Wireless Access Point, UNLEASHED, has TINY CRACK

Description: Up for sale is one (1) refurbished Ruckus R710 Wireless Access PointP/N: 901-R710-US00Dual-band 802.11abgn/ac 2.4 and 5GHz, 4x4:4 streamsRemoved from working service, cleaned, tested & flashed to latest Unleashed firmware (v200.13)Will have very light cosmetic scuffs/scrapes and one small 1" hairline crack on the corner (see pic #2) and may be missing one rubber footDoes not include T-bar ceiling mounting bracket (see my other listings if needed)Factory reset and ready for re-use in standalone Unleashed mode (no controller required):Connect to network and it will obtain an IP via DHCP (or it's IP will be 192.168.0.1 if no DHCP server is available at boot)After 1-2 minutes browse to its IP to start the setup process shown in pic #8 aboveEnter your new SSID name and password and set a new admin password (or use admin::admin to log in)Done!Can be re-flashed with ZoneFlex firmware if you need to use it in managed controller-based modeRequires either a PoE/PoE+ switch or injector power source or a 12VDC 2A Power Supply (not included) with a 5.5 x 2.5mm (male, center positive) plug. Note that the more common 5.5 x 2.1mm plugs will not fit! An example compatible power supply can be seen hereIf using a PoE+ 802.3at switch or PoE+ injector that doesn't use LLDP for PoE+ negotiation the R710 will default to standard 802.3af PoE mode and reduce the radio power. To force PoE+ mode change the PoE Operating Mode in the AP settings as shown in pic #12 aboveRefer to Ruckus "R710" documentation for full specs My items are always packed properly and securely! :)ESD-safe packaging and precautions are used with items that require it. Thanks for looking!

Price: 109.95 USD

Location: Chino, California

End Time: 2023-12-05T21:50:08.000Z

Shipping Cost: 0 USD