Description: Ruger 10/22 - 3 Piece Upgrade Package from "Created By Cay" on YouTube (Official) My most popular 3 Piece Ruger 10/22 Upgrade Package with FREE SHIPPING Aperture Ghost Ring Sights Set- Replaces the Factory Open Sights - Comes in a Set of Two (Large/Small Apertures)- 1x Plinking Aperture Rear Sight Plate 0.125" (3.2mm)- 1x Target Aperture Rear Sight Plate 0.063" (1.6mm) - Material: Precision Machined Stainless Steel *No Rust* - Weight: 0.02oz (0.4g) - Finish: Matte Black Oxide (Blued)**Not compatible with Aftermarket, Fiberoptic, TruGlo, Hiviz, or Rear Sights with the Single Screw Design. See image attached**. Unsure? PM me to confirm.- *Screws not included. Must use original screw(s) provided by Ruger or source new screws.* What you will need- Small Flat Head Screwdriver Instructions1. Check and make sure the rifle is unloaded2. Fold the Rear Sight Assembly down3. Using a Small Flat Head Screwdriver, remove the 2x Screws holding the Factory Rear Sight Plate4. Remove the Factor Rear Sight Plate5. Install Aperture Ghost Ring Sight Plate6. Reinstall the 2x Screws with the Small Flat Head Screwdriver7. Test on a paper target and adjust for elevation as required Index Finger Extended Mag Release ***Right Handed*** - Replaces the Factory Mag Release- No Snag Design (Tab only on one side)- Ergonomic Quick Index Finger Mag Release- Compatible with the Ruger Charger- Material: Precision Machined Aluminum- Weight: 0.56oz (16g)- Finish: Matte Black Anodize**Mag Release does not fit certain aftermarket Archangel Stocks. PM me to confirm****Not compatible with older Metal Trigger Groups. PM me to confirm****Not compatible with non Ruger Trigger Groups. PM me to confirm****Left Handed Model available. Add note at checkout or PM me** What you will need- 5/32" Allen Key Wrench- General Purpose Punch Set (Optional) Instructions1. Check and make sure the rifle is unloaded2. Move the Safety Selector to the center3. Remove the Barreled Receiver from Stock using 5/32" Allen Key Wrench4. Push the Mag Release Pin Out while depressing the Mag Plunger5. Remove the Factory Mag Release6. Install the Extended Mag Release and Pin7. Move/Ensure that the Safety Selector is in the center position8. Reinstall the Barreled Receiver on the Stock using the 5/32" Allen Key Wrench Double Tap Trigger Over Travel Limiter- Replaces the Factory Trigger Spring Plunger- Reduce the Over Travel by 85% for Quick and easy "Double Taps"- Material: Precision Machined Stainless Steel- Weight: 0.03oz (0.98g) Have a Ruger PC Carbine? Checkout the Upgrades I have for it here -> Ruger PC Carbine Upgrades Shipping DetailsI'm a one man show, I personally pack and ship all orders. I ship with minimal and lightweight packaging, just enough to protect the contents for the journey to you. I typically ship on Tuesday and Friday, and would alter my shipping schedule during statuary holidays. That being said, I do commit to a handling time of 3 business days whenever I'm in town. On the rare occasion that I am out of town, I would adjust the handling time on the listing to reflect that delay. For any additional questions, feel free to contact me directly via eBay's messaging feature. Video's available from "Created By Cay" on YouTube >>> Click Here
Price: 58.99 USD
Location: Blaine, Washington
End Time: 2024-01-12T01:19:23.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Created by Cay
For Gun Make: Ruger
Type: Trigger Parts
Compatible Caliber: .22LR
Part Material: Aluminum
MPN: Does Not Apply
For Gun Type: Rifle
