Saniflo SaniPLUS | Upflush Macerating Toilet Kit

Description: This SaniPLUS Upflush Kit IncludesThe SaniPLUS macerating bathroom pumpWhite toilet bowl (size: standard)White toilet tankExtension pipe (for behind the wall installation)Retail Price: $1,584.00Our Price: $1,346.40 + no tax + free shipping (20-30% total savings)UPC#s 002, 083, 005 and 030Available Product Combinations BOWL SIZEEXTENSION?RETAIL PRICEOUR PRICESAVINGSBUY HERE:Combo 1Standard BowlNo Extension$1,524.00$1,295.4020-30%click hereCombo 2Standard BowlPlus Extension$1,584.00$1,346.4020-30%this listing! Combo 3Elongated BowlNo Extension$1,568.00$1,332.8020-30%click hereCombo 4Elongated BowlPlus Extension$1,628.00$1,383.8020-30%click here SaniPLUS Benefits The SaniPLUS is a system that is used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. The SaniPLUS pump is designed to connect with:This SaniPLUS Upflush ToiletAny SinkAny ShowerAny BathSaniPLUS Installation The SaniPLUS is simplicity itself to install; there are just four connections.The macerating/pump is connected to the spigot of a horizontal outlet toilet. The toilet tank is connected to the water supply. The macerating/pump is connected to the small diameter discharge pipe work. The macerating/pump is connected to the electrical supply. Then optionally connect the discharge pipes from the sink, shower and/or bath.SaniPLUS Function The inside of the SaniPLUS comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump. When the flush is activated, the water flowing into the SaniPLUS activates a microswitch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in oil filled enclosure. A common spindle drives the impeller and the macerator blades. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter, enter the chamber and are reduced to slurry as the macerator blades rotate at 3600 RPM. The centrifugal force causes the reduced solids to be ejected through a grill into the container where it is picked up by the impeller pump mounted beneath the motor. The pump operates at 10 PSI and pumps the effluent upward to 15 feet and/or 150 feet horizontally. Once the water is discharged and the water level in the container goes down, the microswitch deactivates the unit until the flush is activated again. A normal operating cycle for SaniPLUS takes about 15 - 18 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal. In addition to the toilet waste, SaniPLUS will also discharge gray wastewater from a variety of other sanitary fixtures, such as: a hand basin, a bath, a bidet and a urinal. When adding a bathtub or shower, a base will have to be constructed, made out of 2" x 6" on edge, to allow for the installation of a P-trap and some gravity flow towards the pump unit. The wastewater from other sanitary fixtures is discharged into SaniPLUS via two 1 1/2-inch inlets, on either side of the housing. Either one or both inlets can be used as required. The discharge elbow on top of the Saniplus can be turned either to the left or to the right, depending on the discharge installation. The SaniPLUS automatically adjust the input rate from other sanitary fixtures, always giving priority to the discharge water of the toilet. Inlet valves operated by a simple float mechanism achieve this. For example, if the bath is being emptied and the toilet is flushed simultaneously, the inrush of water from the toilet into the container slows down or stops the discharge from other fixtures for a few seconds, until the waste from the toilet has been dealt with. As the toilet water is discharged and the level in the container goes down the float valves open and the discharge from the other fixtures resumes. The SaniPLUS is designed to provide vertical pumping up to 15 feet as well as a horizontal discharge, therefore a simple ball non-return valve is incorporated. It has now become possible to install a complete bathroom where previously this would have been impossible or where considerable capital equipment and structural work would have been necessary.SaniPLUS Water Conservation The water closet the SaniPLUS is connected to, uses much less water than a regular toilet, it uses 6 liters (1.6 US Gal) of water per flush.SaniPLUS Product Specifications PART NUMBERS UPC#s 002, 003 and 005 UPC Extension # 030 DIMENSIONS (PUMP ONLY) H12" x W21" x D9" H30cm x W53cm x D23cm MOTOR Induction Motor No carbon brushes or gears. Tested over 30,000 cycles. 3600 rpm. ELECTRICAL SUPPLY 110-115V; 60Hz; 15 Amps Usage 4.65 Amps DISCHARGE Horizontally to 150 ft (50m) Gravity Fall on Horizontal installations: 1/4" per ft Pumps vertically to 15 ft (4m) DISCHARGE PIPE DIAMETER 3/4"; 21mm CONSTRUCTION MATERIALS Polypropylene, C.R.P., Stainless Steel, Neoprene MAX TEMPERATURE 104°F 40°C NORMAL RUNNING TIME 15–20 secs subject to installation pipe run WATER PER FLUSH 1.6 US gal 6 liters VOLUME 7.35 gal/m 27 l/m OptionsBowl Size REGULAR ELONGATEDBOWLRound FrontElongated FrontTANKVitreous china tankVitreous china tankHEIGHT (SEAT)16-3/4 inches16-3/4 inchesDEPTH (OVERALL) 26-1/2 inches28-1/2 inchesVOLUME1.28 gpf1.28 gpfWARRANTY1 year on china1 year on chinaADA COMPLIANTNoYesExtension INSTALLATION - Visible INSTALLATION - Behind WallEXTENSION PIPE NEEDED? NoYes About UsTop rated, authorized SaniFlo dealerOver 30 years’ experienceVeteran in online sales and fulfilmentWe provide our customers:Full Phone Support2 Year WarrantyContact UsWe have SaniFlo experts waiting and all questions,during business days, are answered within 2 hours! Satisfied customers“We put the SaniBEST in our offices here, and it gets used ALL THE TIME from everyone drinking too much coffee lol. But it works great, no issues, would definitely put another one in.” Greg H. Louisiana“We have had major clogging issues with our other toilets, but this one works great. I've never had a problem with it.” Aaron V. Washington“Got to my house in 3 days. I was shocked! Just top-notch ecommerce site all round. Thank you guys!” Monte H. Alabama This SaniPLUS Upflush Kit IncludesThe SaniPLUS macerating bathroom pumpWhite toilet bowl (size: Elongated)White toilet tankRetail Price: $1,584.00Our Price: $1,344.61 + no tax + free shipping (20-30% total savings)UPC#s 002, 083, 005Available Product Combinations SaniPlus Standard Bowl SaniPlus Elongated Bowl SaniPlus Standard Bowl + Extension SaniPlus Elongated Bowl + Extension SaniPlus Standard Bowl + SaniAlarm SaniPlus Elongated Bowl + SaniAlarm SaniPlus Standard Bowl + Extension + SaniAlarm SaniPlus Elongated Bowl + Extension + SaniAlarm SaniPLUS Benefits The SaniPLUS is a system that is used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. The SaniPLUS pump is designed to connect with:This SaniPLUS Upflush ToiletAny SinkAny ShowerAny BathSaniPLUS Installation The SaniPLUS is simplicity itself to install; there are just four connections.The macerating/pump is connected to the spigot of a horizontal outlet toilet. The toilet tank is connected to the water supply. The macerating/pump is connected to the small diameter discharge pipe work. The macerating/pump is connected to the electrical supply. Then optionally connect the discharge pipes from the sink, shower and/or bath.SaniPLUS Function The inside of the SaniPLUS comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and the pump. When the flush is activated, the water flowing into the SaniPLUS activates a microswitch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in oil filled enclosure. A common spindle drives the impeller and the macerator blades. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter, enter the chamber and are reduced to slurry as the macerator blades rotate at 3600 RPM. The centrifugal force causes the reduced solids to be ejected through a grill into the container where it is picked up by the impeller pump mounted beneath the motor. The pump operates at 10 PSI and pumps the effluent upward to 15 feet and/or 150 feet horizontally. Once the water is discharged and the water level in the container goes down, the microswitch deactivates the unit until the flush is activated again. A normal operating cycle for SaniPLUS takes about 15-18 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal. In addition to the toilet waste, SaniPLUS will also discharge gray wastewater from a variety of other sanitary fixtures, such as: a hand basin, a bath, a bidet and a urinal. When adding a bathtub or shower, a base will have to be constructed, made out of 2" x 6" on edge, to allow for the installation of a P-trap and some gravity flow towards the pump unit. The wastewater from other sanitary fixtures is discharged into SaniPLUS via two 1 1/2-inch inlets, on either side of the housing. Either one or both inlets can be used as required. The discharge elbow on top of the Saniplus can be turned either to the left or to the right, depending on the discharge installation. The SaniPLUS automatically adjust the input rate from other sanitary fixtures, always giving priority to the discharge water of the toilet. Inlet valves operated by a simple float mechanism achieve this. For example, if the bath is being emptied and the toilet is flushed simultaneously, the inrush of water from the toilet into the container slows down or stops the discharge from other fixtures for a few seconds, until the waste from the toilet has been dealt with. As the toilet water is discharged and the level in the container goes down the float valves open and the discharge from the other fixtures resumes. The SaniPLUS is designed to provide vertical pumping up to 15 feet as well as a horizontal discharge, therefore a simple ball non-return valve is incorporated. It has now become possible to install a complete bathroom where previously this would have been impossible or where considerable capital equipment and structural work would have been necessary.SaniPLUS Water Conservation The water closet the SaniPLUS is connected to, uses much less water than a regular toilet, it uses 6 liters (1.6 US Gal) of water per flush.SaniPLUS Product Specifications PART NUMBERS UPC#s 002, 003 and 005 UPC Extension # 030 DIMENSIONS (PUMP ONLY) H12" x W21" x D9" H30cm x W53cm x D23cm MOTOR Induction Motor No carbon brushes or gears. Tested over 30,000 cycles. 3600 rpm. ELECTRICAL SUPPLY 110-115V; 60Hz; 15 Amps Usage 4.65 Amps DISCHARGE Horizontally to 150 ft (50m) Gravity Fall on Horizontal installations: 1/4" per ft Pumps vertically to 15 ft (4m) DISCHARGE PIPE DIAMETER 3/4"; 21mm CONSTRUCTION MATERIALS Polypropylene, C.R.P., Stainless Steel, Neoprene MAX TEMPERATURE 104°F 40°C NORMAL RUNNING TIME 15–20 secs subject to installation pipe run WATER PER FLUSH 1.6 US gal 6 liters VOLUME 7.35 gal/m 27 l/m OptionsBowl Size REGULAR ELONGATEDBOWLRound FrontElongated FrontTANKVitreous china tankVitreous china tankHEIGHT (SEAT)16-3/4 inches16-3/4 inchesDEPTH (OVERALL) 26-1/2 inches28-1/2 inchesVOLUME1.28 gpf1.28 gpfWARRANTY1 year on china1 year on chinaADA COMPLIANTNoYesExtension INSTALLATION - Visible INSTALLATION - Behind WallEXTENSION PIPE NEEDED? NoYes About UsTop rated, authorized SaniFlo dealerOver 30 years’ experienceVeteran in online sales and fulfilmentWe provide our customers:Full Phone Support4 Year WarrantyContact UsWe have SaniFlo experts waiting and all questions,during business days, are answered within 2 hours!

Price: 1344.61 USD

Location: Salamanca, New York

End Time: 2024-01-09T19:29:53.000Z

Shipping Cost: 0 USD