Description: Sherline originally designed the CNC chucker lathe for the industrial customers who want the convenience of using multiple tools in a single set-up. The lathe has a 13″ crosslide that accommodates the 3/8″ gang-tooling tool post and two, optional tool posts that can be used for boring and parting tools (tools not included). NOTE: Machines equipped with ball screws will not include laser engraved scales on the mill table or the mill base. Package includes: Chucker lathe with two stepper high torque motors fitted to stepper motor mounts on the leadscrew and crosslide axes. A Dell Latitude model 3190 Laptop With Licensed MACH4 preinstalled for a Lathe Setup. (Mach3 can be substituted upon request.) Sherline PN 8670 4-axis external CNC controller USB-CNC controller for the Sherline 8760 Instructions. A blank 16 Gb USB flash drive with Backup software.1-year warranty on all components including the Laptop. 90-day warranty on all motors and CNC controller . Standard Features Include Ball Leadscrew*: Rolled Ball Screw with BSH Nut .10mm Diameter, 2mm Lead.C7 Accuracy, P1 Preload. The linear accuracy is 50 micrometers/300mm3/8″ Gang-tooling tool post, which holds up to four tools14″ Base (Can be upgraded to 18" For upgrade send us an email 13″ Mill table (Can be upgraded 18". For upgrade send us an email post orderMill Saddle: Has electroless nickel coating with Teflon. This offers a hard surface that is rust proof. The Teflon offers a friction coefficient of .1-.2u for smoother movement of the saddle and the table.3C Collet headstock: TIR (total indicator runout) is rated at 0.001″ (.0005” or less upon request for an additional charge) on the 3C headstock. In addition, the 3C spindle is electroless nickel plated to aid in rust prevention and to increase the surface hardness of the spindle for durability.Powerful 90V DC motor with electronic speed controllerTwo, 2-amp high-torque stepper motors*Accordion way cover and brass-tube leadscrew coverMaximum feed rate is 32 in/min.Largest diameter through the collet is ½” (13mm). NOTE: collets are not available through Sherline Products but widely available by third parties. Included CNC Driver Box Components P/N 8760 4-axis CNC Driver Box (Converts g-code to steps to run DC stepper motors) Output cables for X, Y, Z and A pre-wired with DIN plugs for stepper motors3.7 amp, 24-volt power supply with cord, works on 115 or 240 VACFused circuit protection25-pin parallel cable2 CD set with Ubuntu Linux OS and LinuxCNC control program, and utilities and instructions (You will not need them unless you want to explore Linux OS!)Two spare fuses Specifications: Ball Screw Machine Specifications Swing Over Base 4.950″ (125.7 mm) Swing Over Table 1.875″ (47.6 mm) Hole Through Spindle .5″ (12.7 mm) Spindle Nose 3C Taper 24 degrees Spindle Runout of 3C Taper .001″ or less (.0005” or less upon request for an additional charge) Travel of X-axis 8.2″ (208 mm) Travel of Z-axis 5.8″ (147 mm) (from end of base to front of spindle nose); 6.5″ (165mm) total travel. Handwheel Graduations .02 mm Dimensions (Measurement given are for CNC-ready machines only) Length Overall 22.625″ (574.7 mm) (add 4.625″ for a Sherline high-torque stepper motor) Width Overall 15.375″ (340 mm) (add 4.625″ for a Sherline high-torque stepper motor) Height Overall 8.875″ (225.4 mm) Shipping Weight 51 lbs. (23.2 kg) Motor 90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz. Click here for motor specifications Spindle Speed Range 70-2800 RPM continuously variable by electronic speed control Ball Leadscrew Specifications Rolled Ball Screw with BSH Nut 10mm Diameter, 2mm Lead C7 Accuracy*, P1 Preload *C7 accuracy has a linear tolerance of 50 micrometers / 300mm or .002″ / 12.0″. Stepper Motor Specifications Frame size NEMA #23 Shaft 1/4″ diameter, dual shafts Weight 1.0 Kg (2.2 lb.) Holding Torque 1.35 N.m (Newton meters) 13.756 kg-cm (kilogram centimeter) 191.17 oz/in (ounce inch) 11.948 in/lb (inch pound) Axial-Force Fa=15 N Max., or 3.37 lbf Max. Radial-Force Fr=75 N Max., or 16.86 lbf Max. Distance a=20 mm Rated Voltage 4.5 V DC Rated Current 2.0 A Step Angle Accuracy 1.8° (200 steps/rev) Step Angle ±5% Number of Phase 4
Price: 4476.4 USD
Location: Vista, California
End Time: 2024-02-12T18:46:11.000Z
Shipping Cost: 145 USD
Product Images
Item Specifics
Restocking Fee: 10%
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: 6600
Country/Region of Manufacture: United States
MPN: 6600-CNC
Modified Item: No
Custom Bundle: Yes
Non-Domestic Product: No
Brand: Sherline
Suitable For: Metal
Type: Lathes
