Jardan

Sherline Trailer Tongue Weight Scale 2000lb

Description:   Sherline Trailer Tongue Weight Scale 2000lb Sherline Trailer Tongue Weight Scale 2000lb Trailer Tongue Weight Scale 2000lb If you tow a trailer behind your car, truck or SUV and dont know for sure if the tongue weight is within the recommended range, you could be headed for a disaster. Too much weight and you could damage the hitch or the trailer tongue, causing a catastrophic failure on the highway. Too little weight on the hitch and you could go into an uncontrollable fishtail at highway speeds. But how can you be sure if you are properly loaded? Once the trailer tongue weight exceeds what you can pick up by hand or weigh on a bathroom scale, many people just guess at the weight based on how far the rear end of the tow vehicle sinks when the tongue is lowered onto the hitch. This is virtually useless and a very dangerous method to depend on. To properly load and balance a trailer you must KNOW what your tongue weight is, and the Sherline trailer tongue weight scale offers an easy and inexpensive way to find out. Easy to Use Just jack up the tongue until it clears the hitch. Pull the tow vehicle out of the way, block up the scale and then lower the tongue receiver onto the scale. An even easier method is to release the hitch, lower the jack onto the scale and lift until the trailer tongue just lifts off the ball. Though a little behind the actual pivot point, in most cases it is sufficiently accurate to tell if you are in a safe towing range. If you know the trailers empty weight and the weight of the items you have put in it, you can easily calculate the percentage resting on the tongue. You can also get a total weight measurement at a local drive-on scale to have a more accurate figure. Then you can drive in safety and confidence. This is particularly important for trailers that are loaded differently each time like cargo trailers, RV vehicle trailers and the like. The scale uses a simple hydraulic principle to convert pressure into a reading in pounds on the gauge. No delicate electronics, no batteries, and only one moving part. It is available with gauges reading to 1000 lb, 2000 lb, or 5000 lb for 5th wheel trailers that typically carry a larger percentage of the overall weight on the goose neck. Tow Safely Stop guessing and start towing safely. Reasonably priced for individual trailer owners. Great for travel clubs and trailer dealers too. The scale is machined from solid billet steel and aluminum. It has a 3.25 body diameter and is about 4.5 high without the included screw-on hitch extension. (6.75 with extension installed.) Actual weight is 4.4 lb. Gauge diameter is 2.75. One year guarantee. The 0-2000 lb gauge reads to 900 kg 0-2000lb reads at every 200lbs and has marks at every 50lbs 0-900kg reads at every 200kg and has marks at every 25kg Shipping Delivery time: To keep shipping costs as low as possible we ship USPS Ground (7-10 day) Payment We accept the following payment methods: Paypal Service International Shipments: We cannot guarantee any specific delivery times.

Price: 214.44 USD

Location: Brooklyn, New York

End Time: 2024-05-03T16:01:37.000Z

Shipping Cost: 12 USD

Product Images

Sherline Trailer Tongue Weight Scale 2000lb

Item Specifics

All returns accepted: ReturnsNotAccepted

Return policy details:

Brand: Sherline

MPN: LM2000

Model: LM2000

Country/Region of Manufacture: United States

Type: Does not apply

Recommended

Sherline Miniature End Mill Set 3080 1/8", 3/16", and 1/4" shanks.
Sherline Miniature End Mill Set 3080 1/8", 3/16", and 1/4" shanks.

$29.95

View Details
Sherline CNC Linear Motion Controller
Sherline CNC Linear Motion Controller

$275.00

View Details
MT0 x 3/8-24 Drill Chuck Arbor Fits Sherline Lathes " New "
MT0 x 3/8-24 Drill Chuck Arbor Fits Sherline Lathes " New "

$21.99

View Details
1/4 Inch HSS Tool Blanks Qty 5 fits Sherline Lathe
1/4 Inch HSS Tool Blanks Qty 5 fits Sherline Lathe

$14.25

View Details
Sherline 9/16 Inch Headstock and Motor Unit 3309
Sherline 9/16 Inch Headstock and Motor Unit 3309

$445.95

View Details
Sherline 1072 Tailstock Chuck And Key Jacobs 1ba
Sherline 1072 Tailstock Chuck And Key Jacobs 1ba

$60.00

View Details
Sherline SKU #3002 Cutoff Tool and Holder
Sherline SKU #3002 Cutoff Tool and Holder

$55.20

View Details
Sherline CNC Lathe & Mill Machining Centers Complete w/ Tooling & BobCAD-CAM
Sherline CNC Lathe & Mill Machining Centers Complete w/ Tooling & BobCAD-CAM

$4495.00

View Details
Sherline hydraulic trailer tongue weight scale LM2000 0-2000 Lbs.
Sherline hydraulic trailer tongue weight scale LM2000 0-2000 Lbs.

$99.95

View Details
Sherline Rocker Tool Post Rocker Center 11990
Sherline Rocker Tool Post Rocker Center 11990

$9.82

View Details