Simpson Strong-Tie HELIST254000 - 304SS Helical Stitching Tie, 1/4" x 40" 10ct

Description: Simpson Strong-Tie HELIST254000 - 304SS Helical Stitching Tie, 1/4" x 40" 10ct Simpson Strong-Tie HELIST254000 304SS Helical Stitching Tie, 1/4" x 40" 10ct The Simpson Strong-Tie® Heli-Tie helical stitching tie provides a unique solution to the preservation and repair of damaged brick and masonry structures. Ties are grouted into existing masonry joints to repair cracks and increase strength with minimum disturbance. Made of Type 304 stainless steel, the Heli-Tie stitching tie features radial fins formed on the steel wire via cold rolling process, increasing the tensile strength of the tie. Key Features Helical design distributes loads uniformly over a large surface areaInstalls into the mortar joint to provide an inconspicuous repair and preserve the appearance of the structureType 304 stainless steel offers superior corrosion resistance to mild steel reinforcementPatented manufacturing process results in consistent, uniform helix configuration (U.S. Patent 7,269,987)Batch number printed on each tie for easy identification and inspection MaterialType 304 stainless steel Installation Chase bed joint 20" on either side of the affected area to a depth of approximately 1 1/4" with a rotary grinding wheel. Vertical spacing of installation sites should be 12" for red brick or “every other course” for concrete masonry units.Clear bed joint of all loose debris.Mix non-shrink repair grout or mortar per product instructions and place into the prepared bed joint, filling the void to approximately two-thirds of its depth.Embed the tie at one-half the depth of the void. Trowel displaced grout to fully encapsulate the tie.Fill any remaining voids and vertical cracks with non-shrink repair grout or other repair mortar to conceal repair site. Ordering InformationSold in tubes of 10 FastoolNow on eBay

Price: 247.81 USD

Location: Wayland, Michigan

End Time: 2024-08-25T14:02:40.000Z

Shipping Cost: N/A USD