Sonnax 84754-43K 4T65E Transmission TCC Apply Valve Kit with Seal

Description: 4T65-E TCC Apply Valve KitSonnax Part No. 84754-43KIn GM 4T65-E units, continuous oscillation of the converter apply valve in the cast-aluminum bore causes bore wear, particularly at the TCC signal valve spool closest to the solenoid. Wear in this area allows TCC signal oil to leak, which inhibits the valve from stroking to the lockup position. Due to the valve body casting design and oil flow, this valve is also subject to extreme side loading, which increases the wear rate. Early OE versions of this valve were made from non-anodized aluminum, and show significant wear marks.Hardcoat anodized aluminum valve with an expandable PTFE seal on the TCC signal valve spool provides a positive seal to ensure proper stroking of the valveThe most inward Sonnax valve spool is almost 2.5 times longer then the OE spool, creating more valve-to-bore sealing areaGreater sealing area combined with annular grooves allows the valve to stay centered in the bore and prevents side loadingA replacement O-ring has been included for the OE end plug, to be used after inspecting the TCC regulated apply valveDrop-in Zip Valve™ parts install quickly and easilyNoteAlways inspect the TCC regulated apply valve for wear. The O-ring in this kit should be used to replace the original end plug O-ring after inspection. Worn valves or bores can be repaired using the Sonnax TCC regulated apply valve and sleeve kit 84754-34K.ContentsValvePTFE Seals (2) 1 extraSpringO-Ring A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important InformationShippingReturnsCore PolicyImportant InformationShippingReturnsCore Policy As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other items4T65-E TCC Apply Valve Kit Sonnax Part No. 84754-43K In GM 4T65-E units, continuous oscillation of the converter apply valve in the cast-aluminum bore causes bore wear, particularly at the TCC signal valve spool closest to the solenoid. Wear in this area allows TCC signal oil to leak, which inhibits the valve from stroking to the lockup position. Due to the valve body casting design and oil flow, this valve is also subject to extreme side loading, which increases the wear rate. Early OE versions of this valve were made from non-anodized aluminum, and show significant wear marks. ---Hardcoat anodized aluminum valve with an expandable PTFE seal on the TCC signal valve spool provides a positive seal to ensure proper stroking of the valve ---The most inward Sonnax valve spool is almost 2.5 times longer then the OE spool, creating more valve-to-bore sealing area ---Greater sealing area combined with annular grooves allows the valve to stay centered in the bore and prevents side loading ---A replacement O-ring has been included for the OE end plug, to be used after inspecting the TCC regulated apply valve ---Drop-in Zip Valve™ parts install quickly and easily Note ---Always inspect the TCC regulated apply valve for wear. The O-ring in this kit should be used to replace the original end plug O-ring after inspection. Worn valves or bores can be repaired using the Sonnax TCC regulated apply valve and sleeve kit 84754-34K. Contents ---Valve ---PTFE Seals (2) 1 extra ---Spring ---O-Ring 4T65-E TCC Apply Valve KitSonnax Part No. 84754-43KIn GM 4T65-E units, continuous oscillation of the converter apply valve in the cast-aluminum bore causes bore wear, particularly at the TCC signal valve spool closest to the solenoid. Wear in this area allows TCC signal oil to leak, which inhibits the valve from stroking to the lockup position. Due to the valve body casting design and oil flow, this valve is also subject to extreme side loading, which increases the wear rate. Early OE versions of this valve were made from non-anodized aluminum, and show significant wear marks.Hardcoat anodized aluminum valve with an expandable PTFE seal on the TCC signal valve spool provides a positive seal to ensure proper stroking of the valveThe most inward Sonnax valve spool is almost 2.5 times longer then the OE spool, creating more valve-to-bore sealing areaGreater sealing area combined with annular grooves allows the valve to stay centered in the bore and prevents side loadingA replacement O-ring has been included for the OE end plug, to be used after inspecting the TCC regulated apply valveDrop-in Zip Valve™ parts install quickly and easilyNoteAlways inspect the TCC regulated apply valve for wear. The O-ring in this kit should be used to replace the original end plug O-ring after inspection. Worn valves or bores can be repaired using the Sonnax TCC regulated apply valve and sleeve kit 84754-34K.ContentsValvePTFE Seals (2) 1 extraSpringO-Ring A NAME YOU CAN TRUSTAs an industry veteran in the transmission parts supply business, you can buy with confidence. Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.Important Information As a buyer, it is your responsibility to verify that this product is compatible with your application. For any general questions, technical support, or to verify part fitment please send us a message. Our support is free, and we typically respond within minutes. Shipping Your order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen. In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you. Please Note: All packages valued at over $500 WILL require a signature upon delivery. If your package arrives damaged, please do not open and contact us immediately. If your package is returned by the carrier due to address errors, you will be responsible for the shipping cost. International Customers: Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. Returns 30 Day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging. If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only. Certain item such as used items, tools, and one time use items are not eligible for return. As a buyer, it is your responsibility to verify that this product is compatible with your application. If you ordered the wrong item for your application YOU are responsible for the return shipping. 20% Restocking Fee May Apply Core Policy If you are purchasing an item in which a core charge is required, please be sure your contact information is current. If core charge is not paid within 1 week of purchase, your order will be cancelled. Upon receiving your new part, there will be a prepaid shipping label included so you can return your core (old part) to us free of charge. Please make sure to use the label we send you. You have 14 days to ship your core back to us from the time your new part was delivered. If you do not ship the core within 14 days, you WILL LOSE YOUR REFUNDABLE CORE CHARGE. Exceptions are possible, BUT YOU MUST contact us to make us aware of the situation. ATTENTION INTERNATIONAL BUYERS: Due to the inflation of shipping costs, we are unable to pay for the return shipping on the core. If you want the core charge refunded, you will have to pay for shipping. We apologize for any inconvenience this may cause. Once your core is delivered, please allow 3-5 business days for your refund to be processed. See our other items 4T65-E TCC Apply Valve KitSonnax Part No. 84754-43KIn GM 4T65-E units, continuous oscillation of the converter apply valve in the cast-aluminum bore causes bore wear, particularly at the TCC signal valve spool closest to the solenoid. Wear in this area allows TCC signal oil to leak, which inhibits the valve from stroking to the lockup position. Due to the valve body casting design and oil flow, this valve is also subject to extreme side loading, which increases the wear rate. Early OE versions of this valve were made from non-anodized aluminum, and show significant wear marks.Hardcoat anodized aluminum valve with an expandable PTFE seal on the TCC signal valve spool provides a positive seal to ensure proper stroking of the valveThe most inward Sonnax valve spool is almost 2.5 times longer then the OE spool, creating more valve-to-bore sealing areaGreater sealing area combined with annular grooves allows the valve to stay centered in the bore and prevents side loadingA replacement O-ring has been included for the OE end plug, to be used after inspecting the TCC regulated apply valveDrop-in Zip Valve™ parts install quickly and easilyNoteAlways inspect the TCC regulated apply valve for wear. The O-ring in this kit should be used to replace the original end plug O-ring after inspection. Worn valves or bores can be repaired using the Sonnax TCC regulated apply valve and sleeve kit 84754-34K.ContentsValvePTFE Seals (2) 1 extraSpringO-Ring

Price: 37.4 USD

Location: Shepherdsville, Kentucky

End Time: 2024-09-29T20:33:50.000Z

Shipping Cost: N/A USD