Super Short Car Drying Nozzle for DeWalt 60V Flexvolt DCBL772 Leaf Blower

Description: Leaf Blower Not Included Learn more and keep up to date on developments at @RNoksDesigns Super Short Nozzle for DeWalt 60V Flexvolt DCBL772/DCBL772B/DCBL772X1 Leaf BlowerReplaces factory black nozzle and clear nozzle connectorRequires opening of tool using Torx T15 wrench (not included). It's not all that difficult. See pictures for more info. It should take 5-10min (most of the time is spent removing screws!) I am not responsible if you damage your blower, void warranty, etc.Reduces nozzle length to 97.5mm / 3.8in. Compare that the factory clear tube is 147mm / 5.8in Plus a nozzle has to be installed on top of that.Leaf blower + Nozzle = only 20.5" in total length!Large Nozzle final diameter is the same as OEM DeWalt long nozzle (you will get roughly the same speed and airflow)Small Nozzle final diameter is 65mm / 2-1/2" (you will get increased speed with narrower blast area)Oval Nozzle overall area is about the same as the Small NozzleBuilt tough with thick walls and large large reinforcing rim at end of nozzleCustom designed and manufactured by myself, 3D printed in the USA.Made with PETG filament which when compared to the commonly used PLA, offers improved strength and also high heat resistance (PLA has a poor resistance to heat and can cause deformation).Not interested in opening up your leaf blower? Check out my other listing Here for a short nozzle that connects to the end of the clear tube. Same shapes, just a bit longer overall tool length. Silly Fine PrintDesigned for genuine DeWalt DCBL772/DCBL772B/DCBL772X1 Leaf Blower, will not work with other models. Leaf blower not included

Price: 24.99 USD

Location: Oregon City, Oregon

End Time: 2024-12-27T01:49:26.000Z

Shipping Cost: 0 USD