Sweet Mfg U-Joint, 17mm DD to 3/4 Round, Corvette, Citation Rack

Description: Features no splines on either end, Made of forged vanadium steel with a black oxide coating, Comes with a 3/4" round weld-on end that has a 1.355" O.D., They are the highest quality and ideal for racing or street, Has needle bearing u-joints and a max operating angle of 30-degrees Sweet Mfg U-Joint, 17mm DD to 3/4 Round, Corvette, Citation Rack Sku # 91032255 Mfr. Part # 401-50617 Condition New Brand Sweet Manufacturing Sold Each Details Info Dont jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints have a 3/4" round weld-on end. Full compliment bearingsForged Vanadium steel yokes and u-jointHighest quality for racing or streetFeatures needle bearing u-joints 17MM DD Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1". DO NOT interchange these u-joints. Item DetailsCorvette, Citation Rack 17mm Double D Application This Part Fits When purchasing U-Joints, 3 easy steps will help ensure that they will be correct for your application. STEP 1 Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft. STEP 2 Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD. STEP 3 With these two pieces of information at hand, refer to our chart to find the appropriate part number of the ujoint for your specific application. Charts (GIF) (JPG) (JPG) Installation Tips Tech Tip #1: When using more than two universal joints in a system, a support heim must be used. Tech Tip #2: Increasing a U-Joint's angle of operation beyond 30° dramatically increases the stress on the joint, weakening the whole steering mechanism. If a greater angle is needed, add another u-joint. Specs Material Type Steel Sold in Quantity Each Color Black End #2 17mm DD End #1 3/4" Round Overall Length 3.75 Max Operating Angle 30 MFG. Part # 401-50617 Outside Diameter 1.355 Spline Count No splines Universal Joint Style Single Joint Spline End No Splines Finish Oxide Reviews Good quality Rated by Hot rod Dave on November 04, 2019 Summary: Careful when welding. Too high heat evaporates the lubricant in the joint. Nowhere is this warning documented. Yes, I recommend this product. Fits C-4 rack with a little work Rated by Jeff on March 29, 2019 Summary: Set screw on wrong side, hade to lightly file ID of double d side. Works. Yes, I recommend this product. Looks great Rated by solidaxle on October 11, 2017 Summary: The 17mm end did NOT fit the C4 Corvette rack & pinion shaft No, I would not recommend this product. should work Rated by Marten on March 13, 2017 Summary: Looks good, have not used it yet Yes, I recommend this product. excellent listing, super helpfull, dont change a thing. Rated by Candido "Ken" CAVALIERE on December 10, 2016 Summary: Good old school business practice. Do not fall under the Wall Street greed urge. Look what happens when some do, they fall. Been loyal for 25 years, thank you Yes, I recommend this product. Related Items / Suggested Parts Sweet Mfg Steering U-Joint, 17MM DD, 3/4DD, Corvette, Citation Rack Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole Universal 3/4 Inch OD Solid Steering Shaft/Racing Column, 48 Inch Universal Hollow Steering Shaft/Racing Column, 48 Inch Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 73 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 61.99 USD

Location: Lincoln, Nebraska

End Time: 2025-01-18T13:02:31.000Z

Shipping Cost: 12.99 USD