Taramps HD2000 - 4 Ohms/Digital Amplifier 2000 Watts Rms 1 Channel Free Shipping

Description: DescriptionHd 2000 4 ohms, a 2000 watt full range amplifier with the tradition and quality of one of the most renowned Taramps lines. It is perfect for those looking for power, modern design and versatility. Its frequency response ranges from 10Hz to 20khz, and is available in 1, 2 and 4 ohm versions. It can be used for the most varied types of automotive sound systems, such as speakers in the trunk of your car, mid-bass, midrange, full range speakers, phenolic drivers, titanium drivers, super tweeters, sound walls, residential bob boxes , etc. It has an integrated crossover (hpf, lpf, full) that configures the amplifier's operating mode. Bass boost button that reinforces sub-bass at 50Hz, with variable amplitude from 0 to +10.5db. Gain adjustment that allows adjustment to the output signal levels of practically all CD/DVD player models on the market. LED indicators on, clip and protection.All this and much more to make your sound system more powerful with the quality you deserve. Technical specifications: • Operation Class: Class D.It is the indication of the construction of an amplifier, Class D (also called Digital) due to the PWM (Pulse Width Modulation) used in its operation, it allows for a small, efficient amplifier with reduced heating compared to other construction classes. .• Number of Channels: 01.Number of Channels to use in your project, with this specific model you have the option of connecting only 1 channel.• Power @12.6V – 4 Ohms: 1400W RMS.The power with a voltage of 12.6V volts is related to the operation of the vehicle/power source.• Power @12.6V – 8 Ohms: 515W RMS.The power with a voltage of 12.6V volts is related to the operation of the vehicle/power source.• Minimum Output Impedance: 4 Ohms.Association with the final result of speakers, where, for example, we can connect two 8 ohm speakers or just one 4 ohm speaker to the channel for this result.• Minimum Output Impedance: 8 Ohms.Association with the final result of speakers, where, for example, we can connect only an 8 ohm speaker to the channel for this result.• Minimum Input Sensitivity: 220mV.Lower voltage required for maximum results with the amplifier, that is, with low volume on the radio, we will achieve good results.• Frequency Response: 10Hz ~ 20KHz(-3db).With the frequency response it is possible to identify the application of the amplifier, so if the speaker or any other type of transducer you are using is understood within this response, it means that we can use that product in your project.• Low Pass Crossover (LPF) Variable: 80Hz ~ Full.LPF or LOW PASS FILTER (term in English) means low pass filter, that is, it allows everything below this reference to be reproduced and what is above this indication will not be used, a common use of this function is to reduce the presence of voice on subwoofers.• High Pass Crossover (HPF) Variable: 10Hz ~ 80Hz.HPF or HIGH PASS FILTER (term in English), meaning high pass filter, that is, it allows everything above this reference to be reproduced, the common use of this function is to reduce the presence of bass in door speakers, for example .• Bass Boost: 0 ~ 10.5dB (50Hz).Bass Boost is the Bass Reinforcement for the amplifier's SUB channel, that is, an "extra" reinforcement for the bass.• Supply Voltage: 9 to 16V.It is the operating indication of the amplifier where it will have the minimum and maximum voltage for its operation, outside of this specification it will not turn on or activate protection.• Consumption at Rest: 1.9A.This is the reference for the consumption of the amplifier turned on and without music.• Maximum Music Consumption: @12.6VDC: 100A .This is the estimated consumption of the amplifier working at the minimum impedance playing music at maximum volume.• Maximum Consumption in Sine Signal: @12.6VDC: 200A.Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency and stable power supply.• Protection System: Output Short / High/low supply voltage / Thermal Protection.This system exists to protect the operation of the amplifier. It can be related to the output, when we have connections below the minimum impedance, a short circuit in the installation or even speakers with problems.This protection may also occur due to voltages outside the operating range, or even thermal protection that occurs due to conditions in which the amplifier heats up above normal. • Dimensions: Width 22.8cm X Height 6.4cm X Depth 18.6cm.• WEIGHT: 1.92kg. Package content: • 1 HD 2000 4 Ohm Amplifier Module;• 1 M1 LED Monitor;• QR CODE to download the manual;• 1 Taramps Sticker. IMPORTANT:• We recommend that installation be carried out by a specialized professional and we are not responsible for misuse of the product

Price: 249 USD

Location: São Paulo

End Time: 2024-12-31T10:04:35.000Z

Shipping Cost: 0 USD