Tekno 1/8 Shock Rod End & Spring Perch 6140C, 6.8mm Pivot Ball 5049A, Shock Boot

Description: Choose from Tekno 1/8 Shock Rod End & Spring Perch 6140C, 6.8mm Pivot Ball 5049A, Shock Boots TKR6143 / TKR6144, M3x18mm Cap Head Screw (10) TKR1528. TKR6140C Tekno RC Large Radius Locking Shock Rod End & Spring Perch Set: The Tekno RC Large Radius Locking Shock Rod End & Spring Perch Set is an updated set for 16mm Tekno shocks. This set was designed to drastically increase the life of your shock boots. The spring perch has been redesigned with a large radius at the top of the slot where the perch slips over the shock shaft, eliminating a sharp edge that could quickly damage the shock boot. Less shock boot tearing means your shocks will be more consistent between rebuilds with less dirt and dust being allowed in, which also preserves the shock shafts and o-rings. This updated spring perch set features the same tall spring perch design as the previous shock rod end and spring perch set (TKR6140B) and is made from the same durable composite plastic. Note: Requires the use of captured shock boots (TKR6143, TKR6144, TKR6145). Shock boots should be installed before the rod ends are attached to the shock shaft. Features:Large radius cutout to prolong shock boot life.Locking design ensures you never pop or lose a spring.No sacrifice in suspension up-travel.More consistent suspension action.Durable composite construction.Extended length shock spring perch to help keep the spring in place.Compatible with all Tekno RC 1/8th vehicles as well as the SCT410 and MT410.COMPATIBILITY: Tekno RC EB48 2.0, EB48 2.1, EB48 Original, EB48.2, EB48.3, EB48.4, EB48SL, ET48 2.0, ET48 Original, ET48.3, MT410, NB48 2.0, NB48 2.1, NB48 Original, NB48.3, NB48.4, NT48 2.0, NT48 Original, NT48.3, SCT410 Original, SCT410.3. TKR5049A Tekno RC Aluminum 6.8mm Pivot Ball Set (4): This is an optional Tekno RC Aluminum 6.8mm Pivot Ball Set, and is intended for use with the Tekno RC EB48 1/8 electric buggy. These pivot balls are machined from aluminum to help reduce weight, and are used in the lower end of the sway bar links, as well as in the shock rod ends. Package includes four pivot balls.COMPATIBILITY: Tekno RC EB48 2.0, EB48 2.1, EB48 Original, EB48.2, EB48.3, EB48.4, EB48SL, ET48 2.0, ET48 Original, ET48.3, MT410, NB48 2.0, NB48 2.1, NB48 Original, NB48.3, NB48.4, NT48 2.0, NT48 Original, NT48.3, SCT410 Original, SCT410.3. TKR6143 Tekno RC Captured Shock Boot Set (2) (Medium): This is an optional Tekno RC Medium Length Captured Shock Boot Set. These shock boots are only compatible with the optional Tekno RC Locking Spring Perches (TKR6140)! These shock boots feature a captured design that will result in fewer ripped or torn boots while providing superior protection from dirt and debris. They allow the suspension to remain free and consistent without sacrificing up travel. They are a perfect length fit for their respective shock lengths and won’t be caught or pinched in between the spring perch and rod end during installation.Features:Superior protection from dirt and debrisNo sacrifice in suspension up travel or performanceMore durable than traditional shock bootsEasier installation of spring and perch vs. traditional shock bootsBoot Applications:TKR6143: EB/NB/SCT410 Front TKR6144: EB/NB/SCT410 RearTKR6144: ET/NT FrontTKR6145: ET/NT RearNOTE:Must use with Tekno locking spring perches and rod ends (TKR6140)The boots should be installed before attaching the shock rod end to the shock shaft.COMPATIBILITY: Tekno RC EB48 Original, EB48.2, EB48.3, EB48.4, EB48SL, NB48 Original, SCT410 Original, SCT410.3. TKR6144 Tekno RC Captured Shock Boot Set (2) (Long): This is an optional Tekno RC Long Length Captured Shock Boot Set. These shock boots are only compatible with the optional Tekno RC Locking Spring Perches (TKR6140)! These shock boots feature a captured design that will result in fewer ripped or torn boots while providing superior protection from dirt and debris. They allow the suspension to remain free and consistent without sacrificing up travel. They are a perfect length fit for their respective shock lengths and won’t be caught or pinched in between the spring perch and rod end during installation. Features: Superior protection from dirt and debris No sacrifice in suspension up travel or performance More durable than traditional shock boots Easier installation of spring and perch vs. traditional shock boots Boot Applications: TKR6143: EB/NB/SCT410 Front TKR6144: EB/NB/SCT410 Rear TKR6144: ET/NT Front TKR6145: ET/NT Rear NOTE: Must use with Tekno locking spring perches and rod ends (TKR6140) The boots should be installed before attaching the shock rod end to the shock shaft.COMPATIBILITY: Tekno RC EB48 2.0, EB48 2.1, EB48 Original, EB48.2, EB48.3, EB48.4, EB48SL, ET48 2.0, ET48 Original, ET48.3, MT410, NB48 2.0, NB48 2.1, NB48 Original, NB48.3, NB48.4, NT48 2.0, NT48 Original, NT48.3, SCT410 Original, SCT410.3. TKR1528 Tekno RC M3x18mm Cap Head Screw (10): This is a pack of ten replacement Tekno RC M3x18mm Cap Head Screws, and are intended for use with the Tekno RC SCT410 4wd Short Course Truck. These screws are used to secure the front and rear bumper mounts to the shock towers, and also to secure the lower shock ends to the suspension arms.COMPATIBILITY: Tekno RC EB48 2.0, EB48 2.1, EB48 Original, EB48.2, EB48.3, EB48.4, EB48SL, ET48 2.0, ET48 Original, ET48.3, MT410, NB48 2.0, NB48 2.1, NB48 Original, NB48.3, NB48.4, NT48 2.0, NT48 Original, NT48.3, SCT410 Original, SCT410.3.

Price: 7.98 USD

Location: Victor, New York

End Time: 2024-12-29T18:44:17.000Z

Shipping Cost: 0 USD