Telco Systems TMC-3308 Ethernet/MPLS Demarcation Device TMC-3308-AC-XX

Description: T-Marc 3308 - Carrier Ethernet 2.0, MPLS, IP and SDN Enabled Premise These TMC-3308s are basically new, they have been barely used or not used at all. T-Marc 3308 is a first-class quad-tech demarcation device, offering Carrier Ethernet 2.0, MPLS and IP (Layer 3), and SDN (NETCONF/YANG). Combining all of these capabilities into one device delivers the most cost- while offering the highest level of protection and assuring that requested effective solution and provides operators with the flexibility to face any service scenario now and in the future. Flexible Control of Traffic and ServicesTo allow communications service providers to cope more efficiently with the increased demand for a more diverse range of services, T-Marc 3308/H embeds sophisticated and flexible QoS and HQoS capabilities such as hierarchical queuing, rate limiting and traffic shaping, advanced scheduling schemes, and intuitive service-oriented SLA configurations. This allows providers to benefit from the multiplexed nature of Carrier Ethernet while assuring SLA requirements during traffic congestion. As an MPLS demarcation device, T-Marc 3308/H supports various traffic engineering technologies like LDP, BGP and RSVP-TE. These technologies allow service providers to engineer data paths based on several attributes while offering the highest level of protection and assuring that requested paths can meet defined SLA requirements. They also ensure fast switchover time to minimize degradation or interruption of services in case of failure, and provide high availability and sub-50ms resiliency using G.8031, G.8032, FRR, and Fast Ring standards. L3 SupportT-Marc 3308/H provides comprehensive solutions and services that best support IP (Internet Protocol) environment requirements– including Virtual Routing and Forwarding (VRF) support, IP static routing and dynamic routing protocols like OSPF and BGP. T-Marc 3308/H also supports Dynamic Host Configuration Protocol (DHCP) for dynamically distributing network configuration parameters, and Virtual Router Redundancy Protocol (VRRP).OAM SupportT-Marc 3308/H supports a broad set of hardware-based OAM tools to help providers reduce their operating expenses (OPEX) and to assure their customers that they are meeting their agreed SLAs. T-Marc 3308/H supports IEEE 802.1ag connectivity fault management (CFM) and ITU-T Y.1731, allowing service providers to monitor services end-to-end, identify connectivity and performance issues, enable SLA enforcement, and remotely isolate problems to avoid expensive truck rolls. The device also supports IEEE 802.3ah EFM-OAM at the link-level, and complies with MEF requirements, definitions and monitoring. Using RFC 2544 based embedded test heads and Y.1564 EtherSAM, as well as MEF 46 Latching Loopback, T-Marc 3308/H enables providers to pre-provision and remotely test services (e.g., from a central office), thereby further reducing costly truck rolls, saving OPEX, and improving service quality. Additionally, T-Marc 3308/H supports Zero Touch Provisioning to reduce the need for expensive support when connecting new customers. SDN Support T-Marc 3308/H provides full SDN support with comprehensive adoption of NETCONF, the network configuration protocol, and YANG, its data modeling language. Features: Premium Carrier Ethernet, MPLS & IP service demarcation deviceLayer 3 features support: HW-based L3 forwarding with VRF support using static route, OSPF nd BGP routing protocolsWire speed, full duplex, non-blocking switchingSupport for high scale of services using hierarchical QoS (HQoS)Multiple resiliency mechanismsExtensive, field-proven, OAM supportMEF, IEEE, ITU-T and IETF standards complianceMulti-vendor interoperableIntegrated with EdgeGenie Service Management System – simplifying full lifecycle of network deploymentSmall footprint, 1RU height, 1/2 shelf widthHardened temperature (-40°C to 70°C/-40°F to 158°F) Hardware Characteristics:4 x 100FX/1000BaseX SFP ports4 x 10/100/1000BaseT RJ45 ports1 x Console RJ45port Non-blocking 8Gbps FD platform19” rack and wall-mounting options Services:MEF Services: E-LINE, E-LAN, E-TREE, and E-ACCESSL2 Services: IEEE 802.1Q bridging, IEEE 802.1adQ-in-Q and TLSMPLS Services: VPWS, VPLS and HVPLSMPLS Signaling: RSVP-TE, BGP, LDP/T-LDP and Static MPLSIP Services: VRF-Lite, DHCP client/server, VRRPIP Routing: Static Routing, OSPFv2, IS-IS and BGPv4 Resiliency:Sub-50ms ITU-T G.8031, ITU-T G.8032 R-APS, STP/RSTP/MSTP, Fast Ring, FRR, HVPLS dual homing, secondary LSP,Resilient Link, LAG (static/IEEE 802.3ad LACP/Multi- Chassis), redundant AC/DC power supply Quality of Service:Service classiication per port/EVC/flow single/dual rate limiting, hierarchical and MEF 10.3 cascaded* rate limit per EVC, hierarchical QoS.Support multi-level SP, WRR and hybrid frames scheduling, COS marking and mapping per EVC, WRED*, flow control for congestion handling Multicast ManagementIGMP snooping v1/v2/v3, IGMP proxy; multicast VLAN registration (MVR) OAMIEEE 802.3ah EFM, Hardware-based IEEE 802.1ag CFM, OAM over VPLS, BFD*, MPLS Ping Testing and MonitoringHardware-based ITU-T Y.1564 and RFC 2544 test head, loopback and service performance analyzer, MEF46Latching Loopback controller & responder, ITU-T Y.1731 PM, SM and SLM support, per-port/ EVC/VLAN/COS, hardwarebased MAC Swap loopbacks, TWAMP ManagementConsole, Telnet, SSHv2, RADIUS, TACACS+, SNMP v1/2/3, xFTP, NTP, DHCP client/server*, NAT* and Zero-Touch Provisioning* SecurityACLs, RADIUS, SSHv2, SNMPv3, SFTP, port security, broadcast storm prevention, secured access, ARP protection General SpecificationsDimensions: (H x W x D): 1.75” (1RU) x 8.7” x 9.25” (44mm x 221mm x 235mm)Weight: 2.42 lbs (1.1 kg)Operating Temperature:T-Marc 3308: 0°C to 50°C / 32˚F to 122˚FT-Marc 3308H: -40°C to 70°C / -40°F to 158°FHumidity: 5% to 95% non-condensing InputPower: 100-240VAC or 24/48VDC Regulatory ComplianceSafety: NRTL certiied: C-UL 60950, CSA 22.2 No. 950, EN/IEC 60950, TUV/GS (EN60950),CB, EN 60825-1/2EMC: CE Mark: EN50081-1: EN55022 Class A, EN60555-2/3;North America: FCC 47 CFR Part 15 Class A; ICES-003 Issue4 Class A (Canada); Japan: VCCI Class A; Australia/NZ: CISPR 22 Class AImmunity: EN50082-1, EN/IEC 61000-4-2/3/4/6/11 RoHS complianceKey Applications:MEF CE 2.0 type of servicesBusiness services – MTU or site NIDSDN networks with NETCONF/YANGMulti-service multiplexing for different customers and services while ensuring service separationOAM monitored network for SLA assuranceSupport:https://support.telco.com/

Price: 199.99 USD

Location: Tiffin, Iowa

End Time: 2025-01-05T17:02:56.000Z

Shipping Cost: 0 USD