Description: Do not accept imitations! This is a single shot en-bloc adapter for the Carcano rifle. It will allow to properly chamber the cartridge without risking breaking the extractor claw. The Carcano rifle uses a controlled feed mechanism where the bolt picks up a cartridge and it moves upwards into the extractor claw on the face of the bolt. Forcing the bolt over the cartridge will result in a broken extractor. This loading block fits right in the internal magazine just like a complete loaded en-bloc charger with 6 cartridges. It will lock in by the en-bloc clip latch when placed in so it will not fly out when being used and once you are done using it you then depress the en-bloc release button in the trigger-guard and it will come right out. The block fits inside the internal magazine very nicely but may be a little loose or snug depending on the trigger-guard / magazine manufacturing of them. Once inserted just put the round on the bed of the adapter and push the bolt forward as you would do with any single shot rifle. As mentioned, the block allow a controlled feed mechanism where the bolt picks up a cartridge, moves upwards into the extractor claw on the face of the bolt as it is chambering when closing the bolt and just like it does when using a 6 shot en-bloc charger so that you not break the extractor. It has been successfully tested with:6.5x52mm, 7.35x51mm and 8mm This is the original Carcano adapter, not a cheap copy. Hours of R&D are behind the adapter, supported by our 5 star customer service, just check our feedback! This has been proved and tested by thousands! Due to inflation and higher shipping costs and material I cannot longer offer free shipping.
Price: 22 USD
Location: Saint Johns, Florida
End Time: 2023-10-13T22:23:35.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Country/Region of Manufacture: United States
Theme: Militaria
