Trailer Floor Paint Coating Fast Drying Protection Easy to Apply Roll On Coating

Description: Ready to Use.No mixing, shaking or diluting. Easy roll on application. Water resistant. Non-slip, textured finish.Self extinguishing, non-flammable. Available in black (satin finish) and grey.Easy water clean-up. 1 quart covers 12 sq ft. 1 gallon covers 48 sq ft. (enough for 2 THICK COATS) Product cannot ship to locations experiencing temperatures less than 32 degrees. Coating must be applied and cured in temperatures of 60 degrees or higher. Please note, using less than the required 2 coats minimum will jeopardize the integrity of the coating. Excellent adhesion on wood, painted surfaces, clean bare metals, concrete and more.Product can only ship to a physical addresses, unable to ship to PO boxes. TK64 Trailer Floor Coating is a water-based, plastic coating formulated to withstand abrasion in automotive, industrial and agricultural environments. It offers a textured slip-resistant finish in either black (satin finish) or grey. Apply with included 3/8" foam roller. 2 coats minimum required. Excellent adhesion on metals, wood, concrete, and painted surfaces. Use only outdoors or in a well-ventilated area. TK64 should not be exposed to temperatures below 60°F during the application and the curing process. Use proper protective eyewear and clothing. DO NOT FREEZE and DO NOT STORE IN DIRECT SUN. 1-year shelf life. Excellent adhesion on plywood, treated plywood, oriented strand board (OSB) and bare wood. Ideal for 4x4 tubs, roll bars, bumpers, underbodies, wheel wells, rocker panels, trailer floors and DIY pick-up beds.New trailer floors will only require a light sweeping out before application. Used trailer floors require a more thorough cleaning with special attention to oil spots and gasoline spills. For used trailer floors, remove/replace rotted wood and splinters, fill in major cracks/holes with paintable wood putty. Clean floor with waterborne degreaser (i.e. citrus degreaser). Rinse thoroughly with hose/pressure washer and allow for the floor to completely dry. Repeated cleaning of oily spots might be necessary to ensure proper adhesion. A fan will increase air flow and reduce drying time.

Price: 5 USD

Location: Memphis, Tennessee

End Time: 2024-09-26T21:07:28.000Z

Shipping Cost: 0 USD