Tuff Coat Light Gray 1 Gallon Submersible UT-211WaterBased Non Skid Coating

Description: SUBMERSIBLE MEDIUM TEXTURE: Tuff Coat UT-200 series is a single component, flexible, water-based non-skid coating created through a unique process of cross-linking urethanes, acrylics, co-polymers and recycled rubber granules to create a long-lasting non-slip finish. SUBMERSIBLE MEDIUM TEXTURE: Tuff Coat UT-200 series is a single component, flexible, water-based non-skid coating created through a unique process of cross-linking urethanes, acrylics, co-polymers and recycled rubber granules to create a long-lasting non-slip finish. Tuff Coat’s flexible matte finish dries to 30-35 mils of thickness creating a finish that hides significant imperfections on all surfaces as well as improves existing non-skid finishes to provide additional safety. This product is low odor and should be applied with a Tuff Coat textured roller or low-pressure hopper spray. Tuff Coat 200 series (1 gallon) available in 15 colors. Excellent for concrete, fiberglass, wood, metal substrates, and previously painted surfaces. Product Description Water-Based, Rubberized, Non-Skid Coating Add traction to any concrete, fiberglass, wood, metal, or previously painted surface with Tuff Coat. Tuff Coat is feet & bikini friendly! Feet & Bikini Friendly Tuff Coat is created through a unique process of cross-linking urethanes, acrylics, co-polymers and recycled rubber granules, making it a feet & bikini friendly finish. Flexible & Durable Tuff Coat is a single component, flexible, water-based non-skid coating designed to create a long-lasting non-slip finish. Apply By Roller Or Spray Tuff Coat can be applied with Tuff Coat textured rollers or with a low-pressure hopper gun or commercial texture sprayer for larger applications. UV & Chemical Resistant Tuff Coat is a UV & chemical resistant product, making it a great, long-lasting choice for both indoor and outdoor applications. 3 STEPS TO A PERFECT APPLICATION Step 1: Clean A properly cleaned surface is crucial to achieve a beautiful and lasting finish. It is essential that the surface is sound, dry, and free of all wax, oil, grease, and loose materials. You must remove all grease, oil, and other contaminants from the surface. Do not leave any residue behind. Clean the surface thoroughly with a commercial degreaser, such as Tuff Coat Cleaner & Degreaser and a scrub brush. After the surface has been scrubbed with a degreaser, rinse well with a steady stream of water. Allow to dry. (NOTE: DO NOT use solvent-based products for cleaning purposes.) 3 STEPS TO A PERFECT APPLICATION Step 2: Mix Properly mixing Tuff Coat products is a critical step to achieving a finish that will last for years to come. We highly recommend using a drill mixer capable of 250-500 rpm with a metal mixing blade. Slowly submerge the mixing blade into the Tuff Coat. Do not insert the mixing blade to the bottom of the Tuff Coat immediately. While mixing, make sure you are distributing the rubber aggregate throughout the can/pail evenly. (NOTE: You will periodically need to re-mix Tuff Coat throughout the application process in order to maintain proper suspension of the aggregate in the resin.) 3 STEPS TO A PERFECT APPLICATION Step 3: Apply It is recommended that you apply two coats of Tuff Coat topcoat for light or average traffic areas and three coats for heavy traffic areas. It is important to “build up” the Tuff Coat coating, and do not attempt to achieve desired thickness in one coat. To avoid “cracking”, do not allow Tuff Coat to pool. UT-80 ADHESION PRIMER is a 2 component water-based epoxy primer/sealer that can be used on concrete, wood, fiberglass, and previously painted surfaces to promote adhesion between the substrate and Tuff Coat. UT-80 Adhesion Primer can be applied to damp concrete surfaces following proper application procedures. UT-80 Adhesion Primer is compatible with all Tuff Coat rubberized non-skid coatings. STANDARD APPLICATION GUIDE Fiberglass, Concrete, Wood & Previously Painted Surfaces 2 Coats of Tuff Coat Rubberized Non-Skid Coating 1 Coat of Tuff Coat UT-80 Adhesion Primer Fiberglass, Concrete, Wood or Previously Painted Surfaces UT-95 METAL PRIMER is a fast drying, single-component, water-based, corrosion inhibiting primer thats designed for use on interior and exterior metal application that is compatible with Tuff Coat rubberized non-skid coatings. The product chemically etches for a tighter bond on clean, bare steel or aluminum surfaces. METAL APPLICATION GUIDE Bare Steel & Aluminum 2 Coats of Tuff Coat Rubberized Non-Skid Coating 1 Coat of Tuff Coat UT-95 Metal Primer Metal SUBMERSIBLE ✓ ✓ TEXTURE Medium Smooth Medium Coarse FOR USE ON Fiberglass, Concrete, Wood, Previously Painted Surfaces & Metal Fiberglass, Concrete, Wood, Previously Painted Surfaces & Metal Fiberglass, Concrete, Wood, Previously Painted Surfaces & Metal Fiberglass, Concrete, Wood, Previously Painted Surfaces & Metal COLOR OPTIONS 19 Colors 4 Colors 15 Colors 1 Color COVERAGE PER GALLON (2 COATS) 47 sq. ft. 47 sq. ft. 45 sq. ft. 47 sq. ft. HEAVY DUTY INDUSTRIAL USE ✓

Price: 140.17 USD

Location: Fort Lauderdale, Florida

End Time: 2025-01-05T18:08:58.000Z

Shipping Cost: 0 USD