TWTOPSE 3D Printing Seatpost Parking Disc Clip Block For Brompton C A To P Line

Description: Tips:It fit Brompton A line and C line.Installation pitch needs to be greater than 43mm. Some 3sixty and PIKES are only 38mm, so they don't fit.If it is blocked by rear fender, there are 3 options. 1. Trim the fender.2. Adjust the fender in the rear brake position.3. Bend the fender so that the strap can pass through the gap.Instructions for use, the wheel move closer to frame while press down seatpost. Because the bottom of the original seat tube is horn-type, the diameter is larger, and more space is required to insert.Product details:Name: Seatpost Block For A C line BromptonMaterial: NylonWeight:about 10gFeature:1. It turn your C line A line bike into new P line.2. After installation, the fixed position of the seat post rises. The seat tube doesn't have to be fully inserted into the bottom, so you can push the bike in a more comfortable position.3. We provide a sticker pad to adjust the distance between seatpost and product. If the distance between it and seat post is too much, the bike will fall apart. You can use this sticker pad to reduce the spacing. Brompton is a hand-welded frame. And there are differences between different batches and different models of bikes. The spacing needs to be adjusted according to your bike.4. Using high-quality materials, black and white will not fade and scratch. (Some other sellers use painted surfaces, which will fade and scratch)

Price: 12.99 USD

Location: YIWU

End Time: 2024-08-21T07:45:11.000Z

Shipping Cost: 0 USD