TXS0108E 8-Channel Bidirectional Level Shifter Logic Converter 3.3V 5V

Description: The TXS0108E is an 8-bit bidirectional logic level shifter module to facilitate communication between devices that operate at different logic voltage levels (1.2V to 3.6V on one side and 1.65V to 5.5V on the other). It is a very popular component for a 3.3V logic level to interface with another device operating at a 5V logic level. Applications include microcontrollers, sensors, or other digital interfaces where multiple voltage levels need to coexist. The TXS0108E has automatic bidirectional functionality on all eight channels, so it can shift voltages up or down without needing a direction control pin. This makes it very useful for applications where communication flows in both directions. The module has two voltage inputs, typically labeled VCCA (for lower voltage) and VCCB (for higher voltage), allowing it to manage conversion between the voltage levels seamlessly. It supports high-speed data rates, typically up to 60Mbps for push-pull drivers and up to 2Mbps for open-drain drivers. The TXS0108E includes electrostatic discharge (ESD) protection and other safeguards to protect connected devices. Pin Configuration:•VCCA and VCCB are supply voltages for the low and high logic level sides, respectively.•GND ground pin shared between both sides.•A1-A8 | B1-B8 individual data pins connecting channels between low-voltage side (A) and high-voltage (B) side. Allows 3.3V microcontrollers (like Arduino or ESP modules) to communicate with 5V devices or sensors. Works well with I2C and SPI serial communication protocols where different voltage levels are common.Ensure that VCCA and VCCB are powered with stable voltages appropriate for your system’s logic levels. While it supports high speeds, very high data rates may not be reliably achievable depending on factors like cable length, circuit layout, and the specific devices interfaced.

Price: 7.75 USD

Location: Prosper, Texas

End Time: 2024-12-01T00:40:17.000Z

Shipping Cost: 0 USD