UFQ BT-Series Bluetooth Headset Control Mount | Clip-In

Description: UFQ Bluetooth BT-Series ANR Aviation Headset Controller Mount Holder Cradle | Clip-In | LIFETIME WARRANTY | (UFQBT) Fits the following UFQ Bluetooth Aviation Headsets:· UFQ BT A7· UFQ BT L2· UFQ BT Link· UFQ BT A28· UFQ BT AHA28· UFQ BT P28· UFQ AV Mike-2 Don’t be fooled by copycat listings that look just like ours. Only our products are in use all across the continental US, Hawaii, Alaska, and the Caribbean and backed by a lifetime warranty. Our customers include military pilots, military contractors, airline pilots, corporate pilots, and GA pilots. The use of heavy duty velcro or heavy duty mounting tape (upon request) that doesn’t fail like the “other guys” makes these mounts highly desired. Did we mention that our mounts are the only ones designed from the ground up with mounting holes for permanent installation? Who wants to buy a mount just to drill holes in it, as suggested by the other guys. These are not the factory seconds or defective offerings like the “other guys”, so don’t pay for their manufacturing rejects. Get the mount that was designed from scratch with safety, durability, and your needs in mind. We personally use and abuse our products domestically and internationally in the most demanding conditions and we stand behind our product 110%. Safely secure your expensive ANR control module in an easily accessible location of your choosing. This control mount was designed by a pilot for pilots with the goal of promoting a comfortable and safe cockpit with your headset cables away from your controls. The mounts were designed and manufactured by a pilot to fit the needs of pilots who leave their headsets in their aircraft and for those pilots who take their headsets home with them. Featuring a sturdy design and secure fit, the control mount can be removed easily due to the ergonomic design. Features:· Made in the USA · Lifetime warranty · Fits Bluetooth equipped ANR control module · Mount in any orientation (even upside down) · Made of a durable, impact resistant, UV and temperature resistant material · Secure clip-in design that secures control box even while performing aerobatics · Attaches easily with Velcro™ (included/pre-installed), screw fasteners using the mounting holes, DualLock™, or double-sided adhesive. LE Printworks vs Others:+ LE Printworks: Brand new item.+ LE Printworks: Durable and will not break like others. + LE Printworks: Sleek and easy to use design.+ LE Printworks: Will not damage your headset.+ LE Printworks: Lifetime warranty because we stand behind of our products. No warranty claims to date because our products are the superior solution.+ LE Printworks: Multiple mounting options. Mounts ship with Velcro, double sided tape is available on request, or you can use screws/bolts to secure them. Some models include suction mounts.+ LE Printworks: No gimmicks, the premium plastic we use is resilient under all conditions. Don't be fooled by the competitors' scientific jargon: PLA will deform when exposed to heat, ABS becomes brittle after prolonged direct sunlight, and ASA becomes brittle in cold temperatures. - Others: Factory second.- Others: Negative reviews for poor finish, damage to control module, and breaking.- Others: Weak design which breaks easily (Research reviews on the other major selling platforms)- Others: Ungly, bulky and cumbersome designs that require 3 hands to remove your control module.- Others: Scratches control module and literally causes headset controller to separate on removal.- Others: No warranty or limited warranty. Don't be fooled by the lifetime warranty of our competitors - it's there to compensate for an inferior design.- Others: Mounting tape that fails quickly.- Others: Inferior materials or materials that are coated with paint as a workaround. Order Includes:· 1x UFQ BT-Series control module mount (Headset NOT included) · Pre-installed Velcro™ (Note: Velcro can be substituted for double-sided adhesive upon request.) Buy with confidence: We offer over 30 different aviation headset controller mounts for all popular brands. Our products are so good that our competitors have not only copied our product descriptions in their listings, but they have adopted our testing methods and lifetime warranty policy. We focus on value, customer satisfaction, and product innovation, which is why we continue to deliver new offerings. We have consistently raised the bar in this market segment, our competitors have taken notice, and try to emulate us. This is fine by us because we are more than a 3D printing company, we are operators and we design all of our offerings to meet the demanding conditions that we face on a daily basis. 3D printing was designed to reduce manufacturing costs, so why should you pay for an overpriced headset control module mount from our competitors? Why pay more for blemished factory seconds or cumbersome designs? We are confident in our product and we back that up with a no-nonsense warranty, while our competitors offer 0-2 years. Unlike the competition, we do not use inferior materials such as PLA or materials like ABS which release toxic VOCs during the manufacturing of these products. Our competitors charge exorbitant prices for an inferior design with no mention of destructive or stress testing. Our mounts were maintained for 1 hour in a 160 F environment and did not melt, warp, or lose functionality. Your cockpit will never see these temperatures, but we tested it anyway. Our mounts underwent a 3-axis load test. Our mounts consistently withstood loads greater than 40 pounds. Forces of this magnitude will never be necessary during the use of these mounts, but we tested it anyway. Our mounts have been weather tested to ensure durability. We do not expect these mounts to be exposed to wind, rain, direct sunlight, and extreme temperature swings while installed in your cockpit, but we tested them anyway. I would urge you to compare our rigorous testing process to that of our competitors. We did not have to test our mounts under these extreme conditions, but we did it anyway to ensure your satisfaction and years of worry-free use. If double-sided tape is not your preference, our mounts (unlike our competitors) include countersunk mounting holes. Notes: This item is in brand new condition. This item is entirely 3D printed and may have layer lines and/or minor cosmetic imperfections due to the characteristic of additive 3D printing manufacturing. While this is a common occurrence with virtually all 3D prints, any minor imperfection will not affect the item's fit, function, and durability. If you have an issue with your order please let us know via message or email and we will resolve it promptly. We are committed to providing excellent customer service. Please message us if you have any questions. Shipping: A complete and correct shipping address is essential. We cannot guarantee the shipping address can be changed after checkout. We are unable to change any content of your order after it is placed based on the checkout note or PayPal message. Customers with shipping addresses outside of the U.S. are responsible for all duties and import taxes. Please contact your customs agency for information. Warranty & Return Policy: We offer a 30-day money-back guarantee. The returned item must be in a brand-new, unused, undamaged, and re-sellable condition, including original packaging and complete accessories that came with the item (with all tags and labels attached). If the item is returned damaged or has been opened or used, we may issue a partial refund in accordance with its condition and the issue. The returned item will be refused if it contains any scratches, dirt, or sign of usage or abuse. If the item is damaged, defective or missing components upon arrival, please provide us photos of the damaged package or defective item, we will address your issue promptly and accordingly. Pictures of the damage are required for warranty claims. Contact Us: Your satisfaction is extremely valuable to us. If you have any concerns about your order, please contact us via message or e-mail to resolve any issues before leaving negative feedback or opening a dispute. We will reply within 1 business day (public holidays not included).

Price: 19.99 USD

Location: Saint Petersburg, Florida

End Time: 2023-12-02T02:02:21.000Z

Shipping Cost: 5 USD