Water and Temperature Alert with Text Message and Email Notifications, Dual Sens

Description: Menu Other Items Feedbacks About Us Contact Us Add To Favorites Water and Temperature Alert with Text Message and Email Notifications, Dual Sensors Water and Temperature alerts using your WiFi, no app to install and no hub is required.Email and text message notifications are sent when water is detected. Email notifications are sent when temperature exceeds high or low thresholds. Data collection mode for temperature data sends data to a ThingSpeak channel if configured.View device status and recent activity on a dedicated secure web page. MySpool Central Monitoring Service for this device is included: in case your device misses a scheduled daily check-in, you will be notified that there is an issue. Another notification will be sent when your device comes back online.Comes with an extra long 6 ft power cord and two hardened sensors: a water sensor with a 5 ft wire and a temperature sensor with a 3 ft wire. High quality moisture sensor with nickel plated surface for corrosion resistance is designed for multi use: just wipe it dry and use it again. High quality waterproof temperature sensor has a temperature range from -55°C to +125°C (-67°F to +257°F), with accuracy of 0.5°C over recommended range of -10°C to +85°C.Rugged enclosure supports up to 300 lbs, designed to operate in dusty and moldy environments. Avoid costly repairs by keeping the Water and Temperature Alert anywhere that has the potential for flooding, developing a leak, or exceeding operating temperatures. Product Description MySpool Water and Temperature Alert is a smart device that sends an alert when water is detected or temperature exceeds high or low thresholds. Text and/or email alerts are sent when water is detected, email notifications are sent when temperature exceeds high or low thresholds. Data collection mode for temperature data can send values to a ThingSpeak channel if configured. This device comes with an extra long 6 ft power cord and two hardened sensors: a water sensor with a 5 ft wire and a temperature sensor with a 3 ft wire. High quality moisture sensor with nickel plated surface for corrosion resistance is designed for multi use: just wipe it dry and use it again. High quality waterproof temperature sensor has a temperature range from -55°C to +125°C (-67°F to +257°F), with accuracy of 0.5°C over recommended range of -10°C to +85°C. The alert that MySpool cloud sends is a message, either via email or text, or both. Optionally, this device can also send you push notifications. Water Alerts are repeated every few minutes until the sensor is dry. Water and Temperature Alert is configured to use your WiFi. The WiFi setup takes a few minutes with a smart phone or a laptop. Once your Water and Temperature Alert has been setup, your email address and phone number need to be specified on the myspool.com device configuration page. That page, as well as other user pages displaying device status and recent alerts, are in a secure user area on myspool.com. That area is also used for configuring settings such as text message content and hours of operation. It is accessible to owners of MySpool devices. When setup has been completed, any time water is detected, an email will be sent to you. If configured, you will also get a text message and a push notification. MySpool Central Monitoring Service for this device is included free of charge. This service runs on our cloud servers. In case WATER Alert misses a scheduled daily check-in, device owner will be notified via email that there is an issue. There will also be a follow-up notification when it comes back online. Note: MySpool only sells and supports new products. Setup Instructions for all MySpool devices are available online on myspool.com. This is a summary: Connect your device to WiFi and trigger an alert: dip sensor in a cup of waterCreate an account on myspool.com and click on email link to confirm it or login to your existing accountConfirm your email subscription for this device to receive alert notifications You are done: trigger an alert from your device again and receive an email notification! You can add a phone number and change message and other settings at any time. Device Configuration: 3 steps MySpool device setup Summary 1. Connect your device to WiFi 2. Create account on myspool.com 3. Configure your email and text message on myspool.com The first step is the most challenging one. It should also be done first so that MySpool servers can identify your device when you login to configure it. Step 1. Connect your device to WiFi Open your phone, go to Settings, and choose Wi-Fi. Under the CHOOSE A NETWORK tab you will see available networks. One of them will be the MySpool Device. It will look like SASensor-000000 where "000000" is the unique device ID. In the example it is shown as SASensor-2336877. Click on it. Once connection is established, which may take a few seconds, it will open a browser window with Alerts WiFi Manager. Step 1, continued. Configure WiFi Click Configure WiFI. You will see a list of networks that MySpool device can use. Select your WiFi router and enter its password. Click Save. Note: SAS network will not be visible on your phone after this step. You can now use your laptop or smartphone to create an account on myspool.com and specify where you want your emails and text messages sent. Item Specification Item model number MYSPOO Item Package Quantity 1 Style TWD01 Water+Temp Power Source Corded Electric Sensor Technology Contact Sensor Product Dimensions 4.5"L x 2.75"W x 2"H Country of Origin USA Batteries Required? No Compatible Devices Smartphone Item Weight 8 ounces Batteries Included? No Control Method Voice Is Discontinued By Manufacturer No Included Components Case Dimensions Shipping Returns Additional Info Product Dimensions: 2.75 "h x 4.5 "h x 2.0 "h. Weight: 8.0 oz Fast shipping is very important for us. Our standard shipping service is FREE. Your order will be shipped within 1-3 business days upon full payment received. Most items are delivered within 3-5 business days, however, please allow 3-10 business days. We are shipping only to USA. We only ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. We offer a 30 day return policy from checkout winning date. Your satisfaction is guaranteed! If for any reason you are unhappy with your item, just return it within 30 days for a full refund, minus shipping cost. Please contact us prior to initiating a return so that we can issue you a refund authorization. Items defective upon receipt must be packaged in their retail packaging as if new and returned with a detailed description of the problem. Return shipping fees are not refundable. We reserve the right to decline any returns if the above guidelines are not followed. All of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. If you have a problem or question regarding your transaction please contact us before leaving any type of feedback. We will work with you to resolve any problem you may have.

Price: 91.99 USD

Location: El Paso, Texas

End Time: 2025-01-12T15:28:03.000Z

Shipping Cost: 0 USD