Waveshare NEO-M8T GNSS TIMING HAT For Raspberry Pi Multi-Constellation Receiver

Description: This auction is for NEO-M8T GNSS TIMING HAT NEO-M8T GNSS TIMING HAT for Raspberry Pi, Multi-constellation receiver support, single-satellite timing feature NEO-M8T GNSS TIMING HAT GNSS module based on NEO-M8T for Raspberry Pi, single-satellite timing feature accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming This is a Raspberry Pi GNSS HAT based on NEO-M8T with multi-constellation receiver support, as well as precise single-satellite timing feature. It supports concurrent reception of up to 3 GNSS (GPS, Beidou, Galileo, GLONASS) and augment systems like SBAS, QZSS, IMES, and D-GPS. It features accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming, and so on. By simply attaching it onto the Pi, it is fairly easy to enable GNSS capability for your Raspberry Pi. Features at a glance Precise timing feature, high availability even with one single satellite High dynamic range radios with both analog and digital interference mitigation, supporting applications in wireless communications equipment Multi-constellation receiver support, concurrent reception of up to 3 types of GNSS satellite systems from GPS, Beidou, Galileo, and GLONASS, and still retains low power consumption Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing Supports U-Center, an easy way to config the module Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano Breakouts the module's UART and I2C interface, for connecting with host boards like Arduino/STM32 Baudrate range: 4800~921600bps (9600bps by default) Supports DDC (I2C compliant) interface: up to 400KHz (max) Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts 4x LEDs for indicating the module operating status Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Specifications GNSS Specifications NEO-M8T GPS & GLONASS GPS GLONASS BeiDou Galileo Frequency band 72-channel u-blox M8 engine GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF, GLONASS L1OF, BeiDou B1, Galileo E1B/C Horizontal positioning accuracy Autonomous 2.5m CEP 2.5m CEP 4.0m CEP 3.0m CEP - SBAS 2.0m CEP 2.0m CEP - - - Max navigation update rate 4Hz 10Hz 10Hz 10Hz 10Hz Time-To-First-Fix Cold starts 25s 29s 30s 34s 45s Hot starts 1s 1s 1s 1s 1s Aided starts 2s 2s 2s 3s 7s Sensitivity Tracking and navigating -167 dBm -166 dBm -166 dBm -159 dBm -159 dBm Aided acquisition -157 dBm -157 dBm -151 dBm -146 dBm -142 dBm Re-acquisition -160 dBm -160 dBm -156 dBm -156 dBm -153 dBm Cold starts -148 dBm -148 dBm -145 dBm -143 dBm -138 dBm Hot starts -160 dBm -160 dBm -156 dBm -155 dBm -151 dBm Velocity accuracy 0.05 m/s 0.05 m/s 0.1 m/s 0.1 m/s 0.1 m/s Heading accuracy 0.3 degree 0.3 degree 0.4 degree 0.5 degree 0.5 degree PPS accuracy Clear sky ≤20ns Indoor ≤500ns Jitter ±11ns PPS frequency 0.25Hz…10MHz (configurable) Operational limits Acceleration (max): 4g Altitude (max): 50000m Velocity (max): 500m/s Other Specifications Communication interface USB, UART (4800~921600bps, 9600bps by default), I2C (max 400KHz) Update rate 1Hz (default), 10Hz (max) Protocol NMEA 0183 Version 4.0 (V2.3 or V4.1 selectable), UBX, RTCM 2.3 Power supply 5V Overall current <45mA@5V (Continue mode) Module current 32mA@3V (Continue mode) Operating temperature -40℃ ~ 85℃ Dimensions 65mm × 30.5mm Standard Raspberry Pi 40PIN GPIO Compatible with Raspberry Pi series boards, Jetson Nano single-satellite timing & synchronization high integrity, precise timing feature, high availability even with one single satellite Cost effective, high precision, easy implement Multi-constellation receiver support concurrent reception of up to 3 types of GNSS satellite systems, and still retains low power consumption Supports GPS, Beidou, Galileo, and GLONASS Augment systems support Augment system is aimed at improving the accuracy, integrity, reliability, and availability of positioning and navigation Supports augment systems including SBAS, QZSS, IMES, D-GPS Geo-fencing support Features -167dBm navigating sensitivity, outstanding ability for anti-spoofing & anti-jamming software U-Center support an easy way to config the module applications Ideal for fleet management, asset tracking, financial transaction, smart electricity grids, security systems, industrial PDA, GIS app, etc. What's on board NEO-M8T module RT9193-33 power chip TXS0108EPWR voltage translator Status indicators RXD/TXD: UART TX/RX indicator PPS: GPS status indicator PWR: power indicator Battery holder supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts Raspberry Pi GPIO header for connecting with Raspberry Pi USB port UART, I2C interface for connecting with other MCUs GNSS antenna connector Pinout definition Outline Dimensions Resources & Services WIKI: www.waveshare.com/wiki/NEO-M8T_GNSS_TIMING_HAT * Resources for different product may vary, please check the wiki page to confirm the actually provided resources. Package Contains NEO-M8T GNSS TIMING HAT x1 GPS External Antenna (B) x1 USB-A to Micro-B cable x1 RPi screws pack (2pcs) x1 2x20PIN female header x1 1 2 3 4 5

Price: 110.93 USD

Location: 深圳

End Time: 2023-10-29T10:10:20.000Z

Shipping Cost: 0 USD